I appreciate the fact you made them but man that was a lot of effort! I will watch your other videos because you are clearly not afraid of work and I respect that.
@workhardism
8 жыл бұрын
Agreed!
@Allbbrz
7 жыл бұрын
I agree... that was an awesome project... the final product looks pretty cool but, he also has those lots of comparatively, expensive machines, why don't buy the clamps too ? I know, I know, it's not fun right ?
@stewartmcmanus2701
7 жыл бұрын
I agree, the best clamps I've ever seen but Man what a torrent of work !!!!! Respect in all you do as I'm sure it will be up to this standard.
@hindugoat2302
7 жыл бұрын
a lot of effort for something you could buy easily at the store cheap... and you made it with all store bought materials and tools so its not about self reliance... work smarter not harder, make something significant
@micnolmadtube
7 жыл бұрын
This attitude you guys show displays the exact reason why good, life lasting tools are next to impossible to get anymore. What Finn did was make tools that are build to last long enough to justify the labor and cost of materials versus buying either cheep use-once, that would probably either have to be bought multiple times doing a project or very annoying to work with or expensive use-forever, that cost way more then the self-made ones. Just because a builder has expensive tools doesn't justify spending money carelessly. Resources are always finite and appropriate thought should always be put into what you do.
@bassinbob1965
8 жыл бұрын
I don't think I have seen a better made set of home made clamps. What a great design. You are an awesome craftsman. Thank you for taking your time to create this video for us. Robert
@FinnCrafted
8 жыл бұрын
+Robert Ray You are welcome!
@shaggyda2758
7 жыл бұрын
Very well said Robert .R.
@gnaarW
8 жыл бұрын
finally someone using gloves when working with epoxy!
@CzKaa
4 жыл бұрын
Really? ... 12:42 Hands in contact... :)
@michaelt126
4 жыл бұрын
got excited before waiting another 15s lol
@eikwoodworking5233
6 жыл бұрын
Always makes me laugh when I see people complaining about how many tools someone needed to making something labelled as "homemade"... were you expecting to be able to make clamps with just a steak knife or something? Well done btw!
@cejayes
6 жыл бұрын
Was thinking the same. :D
@Heraclitean
5 жыл бұрын
A little overcomplicated. There are ways to build those that don't involve quite so many tedious steps. But they work and they'll last forever. Kudos.
@SawDustMakerRJM
8 жыл бұрын
Great looking and well built clamps! Good job.
@dudi_fisherman
8 жыл бұрын
Well done!!! Can't understand those disliking.
@vaulthecreator
8 жыл бұрын
+Dušan Stoičević Probably people that would rather go out and buy a set of bar clamps ;)
@TBL_stevennelson
4 жыл бұрын
Some people don't like videos that have no talking. It's not always clear what he's doing. I was able to follow along 99% of the video but there was one time where it wasn't clear what he was doing and with what bit he had used. But in the end it doesn't really matter. I really liked the out come of this project. I wonder what the cost of this project would be if I had gone and picked up all the materials.
@SebastiaanMollema
7 жыл бұрын
Hi man, i like the design and use of the retaining clip/pin. Cool!
@Man11121315
8 жыл бұрын
homemade? he has more machinery than a factory . . .
@vurtzpel5582
8 жыл бұрын
haha
@mikefromwa
8 жыл бұрын
I know, probably $20,000 worth of equipment but no money to buy clamps?
@colossalbreacker
8 жыл бұрын
not even close to 20,000 dollars (at least what was shown in his video).
@mikeoxbig9224
8 жыл бұрын
Yeah but I didn't see him use his lathe or..... That shop surely holds a MINIMUM of $20,000 in tools, yo....
@thoperSought
8 жыл бұрын
$20,000?? I see a table saw, a chop saw, a bench grinder, a nice belt sander, a medium sized drill press, orbital sander, some kind of welder, a small air compressor in the background, an electric drill/driver of some kind, an electric hand planer in the background. did I miss where there was a giant lathe, or a bridgeport or _something_ in the background? that belt sander looked pretty nice, and I imagine it was expensive new, but _even _*_if_* he got it new, none of that adds up to anything like $20k. if you think this was more machinery than a factory, then you've never seen a factory, before. or even a small machine shop, for that matter. if you think that _"money to buy clamps"_ is somehow the point of this, then why are you even watching this video??
@cam-yo9tu
8 жыл бұрын
Nice clamps, but OMYGOD what a lot of time/effort! You could pick up something at Harbor Freight that would do the same thing for under $20 apiece. I would never undertake something like this unless I needed something otherwise unattainable, say, something w/a 12" or 16" deep throat, or 18' long, for some reason. I prefer to expend my time making something absolutely unique and one of a kind. I once had to laminate up a railing for a flying spiral staircase, all one piece over 10' long. I made about 30 clamps using pieces of all-thread, nuts, washers and drilled and chopped up 6" flat barstock. I think the only way it's worth it is if you come up with a truly revolutionary design for a useful tool or other item, then it could be worth spending all that time to make a prototype to send to Alibaba in the PRC and have them make a container full of them for a couple bucks apiece.
@alejandroabt3205
6 жыл бұрын
here in my cuntry Argentina are HUGE expencive these in the other hand are something to look to
@sambking
8 жыл бұрын
Nice work. You are a very talented guy. I am guessing your market rate would be $150-200/hour for whatever you made. My conservative estimate of the cost of this clamp set is $1000.00. Am I close?
@FinnCrafted
8 жыл бұрын
Thanks. I have no idea and have not given it much thought. I made these clamps because i wanted to try making a video for youtube and because i needed them. In my country the market for crafted goods is not that big. I have made a few pieces of furniture that have been sold, but that's about it.
@thmpick
8 жыл бұрын
MAN! You SURE work fast! Very nice work, idea and execution! Thanks for sharing this!
@dwbluesband
8 жыл бұрын
Great Video and Effort.. So much experience learned when doing these kind of projects.. The days of the Craftsman are leaving us, and the attention to detail you exhibited was kewl.. Keep up the good work..
@geoffowens4622
4 жыл бұрын
You have convinced me to buy my clamps! That’s way too much work and time. Well done but time is worth more.
@KAISERDJG
4 жыл бұрын
he could have made something worth 3 times the price of the clamps and actual had clamps and money
@ellsworth5841
8 жыл бұрын
Soooo... what I want to know is where the 'scrap' plywood came from. It's amazing stuff. Looks like 15 solid plys, no voids, plus a rough 'skin' on the surface. Total thickness is 20[mm]? And I think your table saw push stick is made from the same material. Seriously, where are you able to salvage such nice material?
@FinnCrafted
8 жыл бұрын
That is exterior grade plywood. Some left over pieces that i think got salvaged from my dads old job many years back. It was used for the bed of trucks. Yes it is 20 mm.
@ellsworth5841
8 жыл бұрын
Thanks for the response. I just never see anything like that plywood here (Michigan, USA), but I'd like to. The clamps are beautiful. I'd love to have a set.
@vigilante004
8 жыл бұрын
I get accused of over-engineering my projects all of the time. But, after watching you build these excellent bar clamps, I think you top me in the engineering department. I love them! Great job! If you are going to make something useful, then make it well......right?!?!
@FinnCrafted
8 жыл бұрын
I got those over-engineered comments as well and in this case i have to agree. The epoxy alone would have been enough. I actually found an entire bucket full of free screws and fasteners in a dumpster. The small screws are rarely used otherwise so i decided to use as much of them as possible in this clamp build.
@NoNopeAndNo
4 жыл бұрын
I always place an extra screw or bolt or extra thickness where possible. I like sturdy strong and long lasting 👍. Don't worry about the cry babies
@martinsrozenbergs9692
8 жыл бұрын
It was so much work it was getting hard to watch.
@variacenavsiav9945
4 жыл бұрын
😁
@jankyfish8725
8 жыл бұрын
good video. good info. impressed with your video editing, the way you know when to fast forward and when not to. i like it
@FinnCrafted
8 жыл бұрын
Thanks for the support! This was my first video so i hope to develop my editing skills further.
@mrestu9311
4 жыл бұрын
@@FinnCrafted ok
@jeffmclowry
7 жыл бұрын
I gotta say, that's pretty impressive! I can't imagine it being cost effective, but it is bitchin'! Thanks for sharing!
@jucameme3760
8 жыл бұрын
Excelente trabajo, hay que reconocerlo, pero mejor me compro unas hechas, jajaja. me sale mas barato.
@chuckygman4058
4 жыл бұрын
Thank you so much for creating this clamps video Maybe sometime you can make another set without any welding Require or needed for those who don't have welding equipment I would truly love to see that So I can make a set for my nephew and myself thank you so much. 👍👍👍👍🌟🌟🌟🌟🌟
@paulschutte1416
8 жыл бұрын
Mr Finn, despite all the comments I really appreciate your efforts and hard work put into the project, well done. Some advice though, maybe you should have just made a video on how to make one instead of all the fast forwarding.....Again, great job and many thanks !
@FinnCrafted
8 жыл бұрын
Looking back that is probably right, a how to would have made more sense. Never thought my first video would get this much views though. I just wanted to introduce the general idea, and those interested would probably figure things out on their own anyway. Thanks for your comment!
@Timbo868
8 жыл бұрын
Wow! You are a true Maker! I bet those clamps are going to last several lifetime's. I just subscribed. Now keep those awesome videos coming!
@FinnCrafted
8 жыл бұрын
Thanks for your support and welcome to the channel! Clamps seem to hold up pretty well. I have more videos on the way in a few weeks or so.
@jasonmccabe5915
8 жыл бұрын
My cousin, who works as a welder, and I watched this and while we watched this video he said, "You are either a welder or a grinder." LOL
@ricardogori385
4 жыл бұрын
I watched this video about 5 times. It really is a very cool project. Thank you for sharing. When the quarantine ends here in my country (BR), I will try to make a set of these clamps.
@dgb5820
4 жыл бұрын
Love your video, your a very fast worker, these new video formats with speaking are the best. And those handles are outstanding craftsmanship
@lclement4
8 жыл бұрын
You, sir, have incredible talent. I was completely mesmerized by your video.
@roxylee5683
8 жыл бұрын
as was I!!!! at first I was thinking OMFG WHYYY!?!?!?!?!?!?! haha but yea they turned out to be very nice indeed, I absolutely ENVY the focus for such a task, good job
@waynestinyworld
8 жыл бұрын
Well, you earned a subscriber. I follow lots of the Maker guys and have never once left a negative comment and I don't consider what I'm going to say negative...just an observation. I going to watch all your vids as I do everyone else and form my opinions as a whole, not just one vid. I read all the comments below and I can see why some people think certain things. You have to watch lots of the various Maker vids to get a feel for the community and how things are done. I totally agree that there are times when I see a person make something that they could buy for less than say $30 (USD) but to make it they have to use their handy dandy zillion dollar CNC machine and Lazer light engraver...lol. Hey, it's fun to watch but come on. The whole point of DIY used to be because we had to. Now DIY is more like boutique fancy top end stuff that is truly amazing and very well made but well beyond most people's ability simply because of the sheer volume of tools needed. That's not what I notice the most, though. I honestly have no problem with the advanced stuff as long as a person isn't trying to pawn it off as “make your own to save money!” That's when it becomes fake to me. Let's take these clamps. After watching the whole thing I'd have to say that considering the heavy duty build, these things will probably last forever. That makes up for the high expense in those coupling nuts, all thread (very expensive), rectangular tubing, sheet metal (appears to be stock and not so called left over), fasteners (lots of them), cheap cutting board.....and on and on. My suggestion would be to not over emphasize the “scrap” build part like a lot of these other guys do. If you have to drive 60 miles to scrounge parts then you just spent 60 miles of gas and time. A couple of the regular guys I subscribe to make it almost a monumental point to claim they “found” this electric motor or slab of granite or 8 perfect solid oak boards. It really gets old. Let the work speak for itself. You don't have to apologize for finding parts or buying parts. Either way is fine. The design of these clamps is very good. The metal plates creating the strength is excellent. Heck, I liked this one vid enough to subscribe! You have good talent or I wouldn't have sat here writing this long post. Heading to watch all your other vids now. Keep them coming! Also....hehe..sorry, got one more.....countersinking holes has a function. One is clearance and the other is appearance. I see more KZitemrs using countersinks than ever before because they thing because some of the big guys use them that every single hole must be countersunk now. Don't buy into that. Yes, it looks good and no there is nothing wrong with it but you had to do almost 700 holes!!! And it's just clamps! If you watch enough Maker vids you will start saying out loud what is coming next just as a joke because so many people now just follow along with the norm. I should have invested in the countersink bit industry because the Maker crowd would have made me rich lately. All that is just my opinion and all of it can be completely ignored!
@FinnCrafted
8 жыл бұрын
Thanks for your opinions and long post!
@agileanalyst214
5 жыл бұрын
I saw you use these clamps in your coffee table video, and I knew there must be a story behind them. Very cool story. Thanks for sharing
@romanalviter5589
8 жыл бұрын
It is an excellent work, good design and above all patience. I congratulate you, great video!
@wagnerwcg
8 жыл бұрын
Espetacular. Parabéns pelo belíssimo trabalho!
@Senofonte6063
8 жыл бұрын
bravo ...complimenti...lavoro certosino ......di precisione........ma ne vale la pena...perfetto per assemblare ed unire assi di legno e creare assemblati ..
@naufragonaufragado87
6 жыл бұрын
Mostrar la elaboración de un elemento disminuiría la duración del video, convirtiéndolo en más agradable de ver! No necesitamos 4, con 1 es suficiente para observar su desarrollo! Suerte que no pensaras en construir 8 !!
@cesarvilla7681
8 жыл бұрын
Genial pero si tengo tantas herramientas me las compro hechas y me pongo a trabajar en lo que me gusta
@fatih-araz
8 жыл бұрын
Great tutorial. With a little part you can extend the length. Great video. Thanks
@karolapolinsantillan3804
3 жыл бұрын
Eres un genio amigo exelente trabajo por favor podría compartir los planos gracias 🙏 saludos desde huánuco Perú
@ACAB_Media
5 жыл бұрын
Hmmm ... At least $30 in metal, $10 threaded rods, $10 in wood, $20 in other hardware and 3 hours of my time which has got to be worth at least $60 =$130 or I can get 8 48" long tried and true Besseys used online for $50 ... :/
@basenka54
8 жыл бұрын
Работа хорошая. Но я испытывал желание перемотать. ну долго). догло и из за увеличенной скорости не ясно что же делалось. из ролика ясно что это самодельные струбцины.
@mrteecee
8 жыл бұрын
Well... as others already said: this was not efficient if you check the materials AND your time, but I really liked it. Nice work!
@corin164
3 жыл бұрын
Other than the fact that making the build idea earning you some money from KZitem, was it really worth the effort? Based on the cost of raw material and the amount of time it took to make the clamps, for me it would have been cheaper to buy three clamps at my local box store.
@rossboyd5742
5 жыл бұрын
Now that’s a clamp I would build so far the best I’ve seen.
@rodrigofajardo6096
8 жыл бұрын
Very nice bar clamps. How much time and money have you spent for those. Would you please compare it with those in the market.
@jdmuzetti
8 жыл бұрын
Maravilha meu amigo, muito bom mesmo!!
5 жыл бұрын
Parabéns pelo belo trabalho. Deus abençoe sempre sua vida para continuar aplicando os bons conhecimentos e compartilhando-os. Agradeço
@parsfreitas
8 жыл бұрын
Muito bom, parabéns! O seu desenho e tamanho das peças de inserção a ser cortado? Obrigado
@mr-diki
8 жыл бұрын
In Indonesia, the materials that you use will cost more expensive than buying a bar clamps. :-)
@FinnCrafted
8 жыл бұрын
Yes, I understand the cost-effectiveness of these depends totally on where you live. Over here this was affordable.
@relentlessmadman
8 жыл бұрын
Only if you forget to pay your self for your labor, great if you can't get to a hardware store, oh wait where did you buy all the parts? it is good to use your brain. pretty nice design!
@mr-diki
8 жыл бұрын
Of course I like the design. :-)
@mattivirta
5 жыл бұрын
same me in thailand, no found metasl sheet anywere and have expensive, same wood wery expensive, cheapen have buy new at hardware shop, just i buy king size bed because has wery expensive made diy at home, i can made but wood has expensive than ready bed, hahaha
@terryreknaw6152
3 жыл бұрын
Excellent. It's like a Jan svankmajer workshop film. 👍
@ballinderry
5 жыл бұрын
Homemade??? whose home? - not 99.99% of viewers. I'll just buy some mate.
@Morbius1963
8 жыл бұрын
Good idea and demo but if I could afford that equipment I could afford shop bought clamps.
@canuckwoodchuck6396
7 жыл бұрын
Must be in Finland, all metric tools. I had students here in Canada and they don't know metric or imperial! Asked them what's bigger, 1/2 " or 9/16" they couldn't tell me. Show me 1011mm on the tape measure, totally lost! Nice video, good job.
@FinnCrafted
7 жыл бұрын
Thanks. Yes, metric is the standard over here. Dimensional lumber is one exception and we commonly talk about 2x4, 2x6 etc.
@michaelmiller9578
6 жыл бұрын
great job and great clamps ,but, how long it takes , paticular tools and that's a lot of scrap material.
@ZulfikarAbdulaziz
3 жыл бұрын
Best clamp design I have ever seen so far 👍
@xl000
7 жыл бұрын
What's the point of seeing you doing the same thing over and over again in fast forward. I would have enjoyed a shorter video with one instance of each step at a normal speed.
@mule666
7 жыл бұрын
i think,it would be cheaper and faster to buy some factory made ones ..but its nice to see someone likes to do the work himself like me
@santhelena
8 жыл бұрын
Projeto ficou muito bom... Parabéns...
@tanutoikka6982
6 жыл бұрын
Mitäs muutakaan kun Bilteman pikistä! :D pienen locktiten hinnalla saa 2 purkkia ja aktivaattorit päälle. Kauhee työ että saa parit puristimet, mutta idea on tärkein. Hyvää pöhinä!
@humblehombre9904
5 жыл бұрын
Why the gloves? How will your hands ever toughen up if you wear gloves?
@robb4751
8 жыл бұрын
Those were awesome but just plain stupid to go through all that to make. sorry
@MikeSpeakman
7 жыл бұрын
Those clamps are amazing, they will last a long long time. I really enjoyed the video, thanks.
@mattivirta
5 жыл бұрын
shit have lot work, but have best clamp what i has seen youtube and shop.
@ioanniskntgnns3381
8 жыл бұрын
I' m worried about the M6 screw shear strength. I think it can only sustain half of the clamping force the M12 is producing. So if you tighten the clamp M12 at 75% of clamping capacity the M6 pin end will probably break. M8 pin would be an equal match to M12 thread.
@FinnCrafted
8 жыл бұрын
Tightening the clamps by hand i doubt anyone would be able to shear either one. But i see your point.
@The.Home.Cinema.Engineer
7 жыл бұрын
ok that's all good and well making it on your own instead of buying bar clamps but how much did the raw materials cost to make it? plus with the hole and pin system you have to hope that most of what your gluing falls with in the space of those various holes? so what do you do then if a piece needs to be glued that falls inside or outside of those holes on the clamp do you see what Im saying?
@FinnCrafted
7 жыл бұрын
Depends on how much scrap raw material you can find free. Both jaws are movable; one with the pin system, the other with the allthread handle. Distance of both jaws travel overlaps. It's not a problem.
@adickurig
6 жыл бұрын
Any chance for a link to the countersinks you use? Thanks in advance.
@faviotenorio8180
6 жыл бұрын
Está padrisimo tu trabajo, pero con todo respeto, mejor compro unas prensas :)
@thomastieffenbacherdocsava1549
7 жыл бұрын
Checking out another one. You have been doing the cutting with a grinder for awhile. LOL! Look ma No guides! LOL! Really professional job. Looks like you're primarily a metal worker?
@FinnCrafted
7 жыл бұрын
I try not to lable myself as either one as i like both wood and metal, but the dependable, exact nature of metal is inspiring. At its worst, wood can be like a cat; does whatever it wants and not much you can do about it.
@duquemachado1611
7 жыл бұрын
Bem bacana, excelente grampos, parabéns
@ВадимХорошев-к9ъ
5 жыл бұрын
Вот понять не могу какой идиот поставил дислайк. Это замечательно
@bomaite1
8 жыл бұрын
I wonder why you use sheet metal gussets? Wouldn't plywood be just as strong and much easier to work with? Metal looks stronger, but you have that plywood core anyway, which remains the weak link. You can glue plywood, forget the screws, and hit it lightly with the belt sander to finish. I love those bolt detents though.
@FinnCrafted
8 жыл бұрын
Yes plywood would be easier to work with. The idea was to combine wood and metal in this way as i had not seen it done anywhere yet. Plywood is extremely strong when the force is taken by its edges.
@mikefromwa
8 жыл бұрын
Nice, but you can buy a pipe clamps and 4 to 6 foot lengths of pipe for about 60 bucks at Home Depot or Lowe's. I admire your ingenuity, but it seems like an awful lot of work to go through just to save a few bucks.
@FinnCrafted
8 жыл бұрын
Thanks, but for me it is not about saving the bucks or the effort. I live in Finland and we don't have Depot of Lowe's here. But you are right about these being labour-intensive.
@armalo5742
7 жыл бұрын
nice pieces but I choice tobuy y instead of make it myself
@whizperonline
8 жыл бұрын
eso satisface mis ganas de saber como se hace, pero demora mucho y no lo veo practico.
@mauriciohildolfowilsonjarp7700
8 жыл бұрын
¡¡Magnífico...!! Las mordazas muy bien pensadas y construídas. -- Un saludo cordial desde Europa para usted señor FinnCrafted.
@FinnCrafted
8 жыл бұрын
Thanks, greetings from Finland!
@simonrickard1
8 жыл бұрын
Your clamps look good, though highly labour intensive. I think the video would be more enjoyableto watch if if you showed each operation once at normal speed rather than several times at high speed. Thanks
@FinnCrafted
8 жыл бұрын
I will try to take that into consideration when making this kind of video in the future. Thanks.
@novelldy9356
8 жыл бұрын
ribet mas, mending beli aja, lagian ga punya alat2nya.. hehhehe
@jimgraham4673
Жыл бұрын
Great clamps, but was the bang worth the buck ?
@jlsamarcenaria2422
8 жыл бұрын
FinnCrafted,Boa Noite,Parabéns´pelo videos Homemade Bar Clamps,Show de Bola.José Luiz,Vitória-Es,Brasil.Blz!! ,
@graemecrowther.7557
4 жыл бұрын
Fantastic, but I think I will just buy mine. 😉
@youssefb6336
7 жыл бұрын
you dont call it a home made if you have all those machines and tools
@jfazion
8 жыл бұрын
muito legal bem bolado parabens só poderia ser um video normal e não acelerado pena
@amorysol6835
8 жыл бұрын
very nice work, congatulations for this work and thanks to share with us. About minute 12, I amost loose my hand doing that a couple of months ago, dont has any sensibility now, be more careful because that injury is terrible and painful!!!
@seanconor1
8 жыл бұрын
those were some fantastic clamps. I don't know if I could ever tackle a project with that many holes! so much countersinking good job. do you have an estimated total hours it took to build these?
@FinnCrafted
8 жыл бұрын
+Sean McDonnell About 40 hours like i said below. I did purposely go overboard on the screws as i got them free and had no other use for them. Epoxy alone would probably suffice.
@appliedpr9108
6 жыл бұрын
I think .... Is cheaper to buy them, No?
@kiyotakakaneko3602
4 жыл бұрын
If you made one, the video was five minutes long.
@bmuff88
4 жыл бұрын
Hey man, the risks of galvanized metal fumes are serious, using a cutting wheel on galvanization creates enough to warrant PPE. You ever get headaches cutting galv sheet?
@allthings2allmen
7 жыл бұрын
Sorry I never commented before, I dig your style man! Definitely gonna make some clamps similar if not exact. Definitely worth the trouble..no question! No need to explain or convince me!
@YouD0ntSay
3 жыл бұрын
Very nice. These are going to last 200 years.
@michaelparry1383
8 жыл бұрын
This is so great. It may have been made at home, but it is not what you would consider homemade. This is so professional. I would prefer the quality in these units over any I would purchase at the local hardware store. Great work. Also, I like how you used the sound effects in the video. Informative, interesting, and very entertaining.
@DedalVideo
8 жыл бұрын
Excellent video. If you can tell me where did you buy your pants?
@FinnCrafted
8 жыл бұрын
Thanks. Pants are L. Brador 161 PB, can't say from where. Got them as a present.
@DedalVideo
8 жыл бұрын
Thanks.
@ציוןשלום-ג7כ
8 жыл бұрын
I saw tens of thousands of videos is performed in which demonstrations of your product clamps I built a very high quality product very similar to yours aluminum and is certainly doing its job Thank you for sharing and fail your way.
@micnolmadtube
7 жыл бұрын
+FinnCraft Well made! There were several times where I thought to myself that was odd or stupid but later realized why you did it this or that way. Well planned out and shows you have thought of stuff I didn't :)
@rustyrichardson1242
5 жыл бұрын
Really cool. I can’t make them (yet) my welding skills are to put it nicely, non existent lol. But I seen so many made out of wood and I wondered if metal sides would be better and I think that I will incorporate both designs Thanks for sharing
@viejojorgge
4 жыл бұрын
TE FELICITO POR EL TRABAJO Y LA DEDICACIÓN, SIN HABLAR DE LA PROLIJIDAD, PERO DEBE SALIR MUCHISIMO MAS BARATO HACERLO HIERRO Y NO CREO QUE DE TANTO TRABAJO..!!
@JohnDoe-kp3sw
5 жыл бұрын
It's not just you but many videos. I would like to see it in use first before I decide if I want to watch the process of making it otherwise I won't watch at all
@jammicwe52
7 жыл бұрын
I'll have to watch this thing over and over, just to try and do that. Talk about dedication, you are like some zen master or something. Your work is brilliant.
@phillipsummers9940
8 жыл бұрын
Awesomeness of a video. Just out of curiosity how much did you have into building these clamps?
@FinnCrafted
8 жыл бұрын
About 40 hours.
@pixiesmate
8 жыл бұрын
I'd have to omit the welding, anyone seeing my welding would see why I'm a carpenter not a fabricator. Very nice project
@jimb9369
5 жыл бұрын
Next time, stack the metal parts and drill through including one extra or thin wood form. Then Drill enlargement holes with the extra or thin wood form removed. Then drill countersinks. Use the extra or thin wood form as a guide for pilot holes in the plywood. This eliminates having to disassemble and then clean up the wood and metal.
@Ditchdoc220
7 жыл бұрын
I have no idea why, but that was immensely enjoyable to watch. Mesmerizing. Thanks for the build.
@billderinbaja3883
6 жыл бұрын
Cool project, great mix of finish carpentry and metal working... you got a big bag o' skills, amigo.
@essexmirage
4 жыл бұрын
By far the best design on KZitem, well done, I shall be havong a go at making these just collecting together the parts to construct them mostly recycled !
Пікірлер: 587