Homemade Bow Press -Part 5
In part five I machine the threaded rod and an aluminium dust cover for the outer thrust bearing.
I had to machine the threaded rod as the thrust bearings I had have a smaller internal diameter then the rod. This part could easily be made with no machining at all if the thrust bearings are the right size. Also the smaller threaded end of the rod could be done away with and just have the handle secured by another large nut.
Off camera I machined a bronze bushing to go between the shaft and the end cap.
If you missed other parts.
Part 1: • Homemade Bow Press - P...
Part 2: • Homemade Bow Press - P...
Part 3: • Homemade Bow Press - P...
Part 4: • Homemade Bow Press - P...
Негізгі бет Homemade Bow Press - Part 5
Пікірлер: 6