My first comfortable headphones with unique design. If I can not find something what I want , it is time to make it . Enjoy my video and please subscribe.
When you recess it into the back of the headphones like that you end up with a pressure differential that can cause a loss of high's and an overextension of bass, maybe some echo's, some flutter, etc. I would add a vent to the back, but yet again I have no idea how it sounds like, maybe the driver already had issues in key areas and it turned out wonderfully and you are just a (possibly unintentionally) professional audio engineer, something I am not, that has this under control and don't need keyboard warriors like me telling you how to do your thing. Great work btw, not hating on it just giving recommendations, want you to do well. Also if you ever feel like getting open backs you could cnc out a better-looking koss ksc75 and just put the drivers in there, they're good sounding drivers and are really easy to build for since they're open back.
@wahidtrynaheghugh260
5 жыл бұрын
Other way around, less bass and more highs, as the driver’s excursion is limited by the high pressure behind it and the lower the frequency, the more excursion is needed for the same SPL.
@zlatankovacevic4281
7 жыл бұрын
Great job, they're absolutely beautiful! What's the song at the end? I really like the sound of it
@GregsGarage
7 жыл бұрын
Just awesome. Did you take a set of headphones apart for the speakers or are those available on line?
@coldbloodedfasist5536
7 жыл бұрын
awesome job!
@MinhDIY
6 жыл бұрын
AWSOME , I LIKE IT
@oberleitner1
5 жыл бұрын
muito bom parabens amigo!
@thelekhaksahab1547
6 жыл бұрын
#GreatBro..😊
@CriscoSniper
6 жыл бұрын
Enjoy every minute of your video. Would love to work with you on a project.
@piotrekg9617
4 жыл бұрын
Hi, have you still got cnc files? I cant find them on both link. Thank you very much
@Pattex_
6 жыл бұрын
What thickness is the copper rod?
@ArduinoTex
5 жыл бұрын
good job!
@jamesspaulding2231
5 ай бұрын
They are beautiful
@jesusisava6347
7 жыл бұрын
What kind of wood did you use to make the bow
@seanlennon5044
7 жыл бұрын
Just spent £350 on a pair of Oppo headphones, I should've done this instead. Nice work btw.
@mattiaschmid2385
7 жыл бұрын
they wont sound as good as yours...
@rotta8548
7 жыл бұрын
Sean Lennon Depends...
@dopinder2908
5 жыл бұрын
If i was you do not ever buy a phone from oppo or vivo. They are just immitating products from the leading brands and not even have a good quality on them.
@jidofole
Жыл бұрын
Creative interpretation of 'Home'
@101boertjie
7 жыл бұрын
They look great, very nice job there.
@coldbloodedfasist5536
7 жыл бұрын
I'bet you can do that with a copping saw!
@johannese.4318
7 жыл бұрын
Wo kann man den kaufen? nice work!
@pierreoffice3823
6 жыл бұрын
so do another video on how to make a 3D printer :)
@simplyme9336
6 жыл бұрын
How do they sound?
@StanTheBland
3 жыл бұрын
Feel like iron man, constructing his suit
@kewachan
5 жыл бұрын
Muito bom!!!
@MateusSilva-rn4qe
5 жыл бұрын
Kevin Chan oi br
@arpanbhosale2659
8 ай бұрын
Bote earphones in wooden ?
@SinedWOLF
4 жыл бұрын
👍👍👍
@adriaanerasmus329
7 жыл бұрын
Great headphone dude. Would it be possible to dothis without a cnc router?
@IDEAforWOOD
7 жыл бұрын
Yes , everything is possible to make by hand , but it takes little bit longer. I've made sunglasses with cnc router and after that by hand. With these headphones is same.
@user-mt1lb3bt1s
5 жыл бұрын
Good job🎊 what is the track at the end video?
@crisplemons
5 жыл бұрын
Darude sandstorm
@jellepwnage
6 жыл бұрын
Hi there, was wondering if u still have the cnc files on hand to send? Cant find them and the site is down.
@515178
6 жыл бұрын
Not shure, maybe look here 3dwarehouse.sketchup.com/search/?q=headphone&searchTab=model
@MowgliMachete
7 жыл бұрын
Can you make these for me?!
@ledfed1912
6 жыл бұрын
this dude knows nothing about acoustic design of a headphone, but the craftsmanship is great.
@MrGodofwar666
4 жыл бұрын
perhaps a bit too late but how do you design a good acoustic headphone?
@livingblackbusinessnetwork2725
7 жыл бұрын
This is awesome...is it possible to share the CNC file? I'd loe to give this a try.
@IDEAforWOOD
7 жыл бұрын
I put on my web in few days.
@huanhosedubo
2 жыл бұрын
Why the driver on the bottom?
@jesusisava6347
7 жыл бұрын
que tipo de hierro es ese
@zacharypearle2543
4 жыл бұрын
Do you have the original files for the project? I have a CNC and would like to make them :))
@IDEAforWOOD
4 жыл бұрын
Of course , your e-mail?
@zacharypearle2543
4 жыл бұрын
@@IDEAforWOOD farcryfromreality@hotmail.com thank you so much!
@zacharypearle2543
4 жыл бұрын
@@IDEAforWOOD Hey there, I haven't gotten the files yet. Would you still mind sending them over? I haven't figured out a gimble system for my own headphones, nor have I found a way to mount the driver. Would love the reference material. Thanks!!
@kabirverma6751
6 жыл бұрын
Great headphone can you copy shure srh1840
@dharsito
4 жыл бұрын
6:06 no no noooo :D
@leolord1
6 жыл бұрын
HOME MADE?
@sujaybhattacharya6562
Жыл бұрын
I want to order
@mkruizv
5 жыл бұрын
Dude, this is super awesome (although i feel the cnc part is cheating) Awesome job, anyway.
@jeronimoalderete
4 жыл бұрын
Fucking awesome
@finhas786
5 жыл бұрын
It would have a very bad performance in the low end.. as u have not taken anycare for the acoustics..
@sadakchhaapsingerofficial7421
5 жыл бұрын
Please give me your headphones
@ddpaud
7 жыл бұрын
3:45 what is that ??
@Smigger97
7 жыл бұрын
A wood router.
@mixi3147
7 жыл бұрын
dd_Paud
@NA12495
Жыл бұрын
Like watching the build. Not a fan of the name for them.
@MrLanoregreb
7 жыл бұрын
My god the song at the end is so bad...
@Gibley
5 жыл бұрын
Фигня что на клей посадил а как это тогда ремонтировать
@thorodinson4582
6 жыл бұрын
Wait... he just made a video where he's making his own handmade headphones! At least now he can buy a real one from the views 😂
@Sledmog
7 жыл бұрын
How to make stuff; own robots that make stuff.
@LAZYxDISASTER
7 жыл бұрын
although they are cool, your not makind them, cnc is naking them
@monksb
7 жыл бұрын
cnc is a tool for creating any kinds of project. . . a tool used by a professional, so technically, jimkrum do make that because a machine doesnt have a will of its own to build a headphone :/
@ledfed1912
6 жыл бұрын
He is making them, he designed the cad file. For example when you are using a rasp to shape the wood is it the rasp that is making it and not the person holding the rasp? The cnc is just a tool that is really good at being used to create precise pieces.
Пікірлер: 69