Hey there, in this video I am going to show you how you can build a magnetic swarf collector which has plenty of magnetic force to clean up your workspace and machines as well as spilled screws etc.
Tools you will need:
-angle grinder / hacksaw
-sandpaper / file
-gas torch
-metal snips
-clamps
-hole saw / circle cutter
-5mm hss drill
-7mm ratchet socket
-pliers
-vise
-electric drill / drillpress
-hammer
-center punch
-cricle
-sharpie
Materials you will need:
-copper pipe 360mm long / 1inch inner diameter /1,5mm wall thickness
-copper sheet 0,5mm thick about 150x150mm
-solder + flux
-plywood 15mm thick a rest piece with a size of 40x40mm would be enough
-copper pipe inner diamter a bit larger than 1 inch so it fits over the 1inch pipe
-old wood or bakelite handle
-m4 self locking nuts
-m4 washers
-m6x20 washers
-20x5mm or 20x10mm neodym magnets with a 5mm hole in the middle
-motorbike or drill rubber handle
Here are the free plans:
imgur.com/a/6EJI9GG
Make sure to wear proper protection like saftey googles, etc. to prevent any injuries.
If you have any questions / suggestions let me know i will answer as fast as possible.
Don't forget to leave a like, subscribe and comment if you enjoy the content.
-Until than stay safe and happy building.
Негізгі бет Ғылым және технология Homemade Metal Chips Collector
Пікірлер: 3