Building a removable plate for the saw itself, removable inserts for the blade, and fine-tuning the saw. The removable plate could be used to replace the saw with other tools in the future (like a router or a jigsaw), or replaced with a thinner plate that will allow more depth of cut.
I made a mistake in the video at 12:56, as I should have divided by 4 and not by 5. This means that the error is of 0.00877 degrees and not 0.000122 (which isn't correct even when dividing by 5)
Detailed information about this project: ideasketchbuild.com/homemade-t...
The rest of the videos in this homemade table saw series:
1. Building and aligning the fence: • Homemade Table Saw - 1...
2. Cutting the miter slots: • Homemade Table Saw - 2...
3. Building a crosscut sled: • Homemade Table Saw - 3...
4. Removable insert and fine-tuning (this video)
More about my "drill press": ideasketchbuild.com/building-a...
Music: "Wallpaper" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
==================================================
For the latest videos and updates, be sure to like our facebook page:
/ ideasketchbuild
Visit us for more projects: ideasketchbuild.com
Негізгі бет Тәжірибелік нұсқаулар және стиль Homemade Table Saw - 4: Removable Insert and Fine-Tuning
Пікірлер: 317