If you're gonna do an axle paddle video could you start from maybe a bone stock rear (300, 350d, 250br), and show what goes into prepping it? With or without stretch, shock relocate, cutting axle tube, etc. Maybe show a brake delete too, haven't seen any video's on that. Glad to see you're getting more involved in the 300 Facebook page man, best of luck with selling reductions and stuff.
@TheHondaOutlaw
6 жыл бұрын
I suppose i could because i do get that alot questions and same with a brake delete although i seen something i may start making and selling on the brake delete, that is just a bolt on kit but idk that will be later down the road after i get these prototype reductions done and this lift
@billybobsoffroadvideos7456
5 жыл бұрын
I would love to see that video
@jessyedge5492
6 жыл бұрын
I didn't even think of that. Thank you
@TravisMfPowers
6 жыл бұрын
love it man!
@johnpaulk994
6 жыл бұрын
“Just a ten inch lift”
@TheHondaOutlaw
6 жыл бұрын
just
@WillisAudio
6 жыл бұрын
Man that lift it up there i got a 3 inch in the back of my 300 i built it out of a old bed frame
@Abels-Adventures
6 жыл бұрын
Plasti-diped green yep green 😂😝 I'm just pulling your leg great video
@masonsebrnn3297
3 жыл бұрын
can u send a link of the heim joints bungs and pipe that you are using
@johnharrell2240
6 жыл бұрын
Please do a full axle paddle video like the dude down below said! I would like to know how you do they whole thing.
@TheHondaOutlaw
6 жыл бұрын
sure thing, would a timelapse do or would i need to go through it all step by step?
@johnharrell2240
6 жыл бұрын
If you have the time i would like the step by step but if you can't thats fine. Cause I know you have more stuff to do that edit and make videos.
@casonray
5 жыл бұрын
Could you drop a link to which turner axles you ordered? That would help me out a lot
@TheHondaOutlaw
5 жыл бұрын
turner=shit, call cobra axles they will help you
@Micheal_OS
6 жыл бұрын
Don't see how those cv axles won't bind with them at that angle
@FergusonBoatworks
6 жыл бұрын
I would like to see an axle paddle video....
@TheHondaOutlaw
6 жыл бұрын
i did a rough how to at one point in time, what would you like to see about this one?
@FergusonBoatworks
6 жыл бұрын
Honestly nothing particular I am just gathering Ideas, I have a 300 and a 420 I would like to paddle. are you going to start with stock 300 rear end, Is that even possible? I have looked around on HL forums and on most the good threads the pictures are dead....
@TheHondaOutlaw
6 жыл бұрын
you can but its highly reccomended to not do it to a 300 rearend
@FergusonBoatworks
6 жыл бұрын
Because of the strength of the actual diff case and gears, or the lack of axle tubes and bracing to work with? As in If I just use the diff and basically build a swing arm?
@TheHondaOutlaw
6 жыл бұрын
lack of axle tubes and poor design of the 300 diff
@Error-4-0-4-
6 жыл бұрын
Love the just a 10" lift part lol. What size tube or pipe you using on this lift.
@TheHondaOutlaw
6 жыл бұрын
sch 40 1''
@Error-4-0-4-
6 жыл бұрын
TheHondaOutlaw what I thought it looked like what hiems you go with. Recently picked up 5 or 6 10' sticks of 1"sch40 to build a bumper and few other things for my 300 and thinking of swaping my lift to just looks nicer.
@jessyedge5492
6 жыл бұрын
Alright well I thank you. My dad friend traded me a set of rims and outlaws like that but just anit as tall. I just like the rims and they don't make those rims any more.
@TheHondaOutlaw
6 жыл бұрын
yeah they do, the rims are call itp c series type 4, i just looked on google and there are ones available
@TheHondaOutlaw
6 жыл бұрын
im not sure if you have the size you need or even the correct ones but there are some on google
@billclintin326
5 жыл бұрын
How much for a 6 inch lift 6 inch stretch with drive shaft Axel's everything I need to bolt on and drive
@TheHondaOutlaw
5 жыл бұрын
2300 shipped or buy th front half of my 8" and i can make a stretch to match it for 1800 shipped
@billclintin326
5 жыл бұрын
I have a stretch for the rear already how much would you sell the front axles upper lower a arms and shocks for that's what I need
@TheHondaOutlaw
5 жыл бұрын
1400 for the entire front half, the stretch on my bike im keeping and ti wouldnt work for you anyway
@jessyedge5492
6 жыл бұрын
Are you going to sale your 29 outlaws
@TheHondaOutlaw
6 жыл бұрын
i traded them off a long time ago
@billgarrelts5193
6 жыл бұрын
What year is your 30@ I'm thinking about doing a build
@TheHondaOutlaw
6 жыл бұрын
my blue one is a 95
@billgarrelts5193
6 жыл бұрын
Ok thanks
@connormcleod7338
6 жыл бұрын
Do you mig, tig, or stick weld your lifts?
@TheHondaOutlaw
6 жыл бұрын
mig
@connormcleod7338
6 жыл бұрын
TheHondaOutlaw thanks man. Anxious to see that new monster come together.
@TheHondaOutlaw
6 жыл бұрын
that will be in just a few days
@connormcleod7338
5 жыл бұрын
@@TheHondaOutlaw how far are those axles extended past stock? Rincon axles I'm assuming
@TheHondaOutlaw
5 жыл бұрын
+8 logn side rincons is what those were, they really needed to be short side ones though, the longs made it right at an 11'' lift
@thomasmarquardt8435
6 жыл бұрын
Do u know anyone that make a arms for a 350 rancher
@TheHondaOutlaw
6 жыл бұрын
depending on your location maybe, where u located at
@thomasmarquardt8435
6 жыл бұрын
Im located in tx
@TheHondaOutlaw
6 жыл бұрын
im sorry the closest person i know who could is in lousianna and he would need the bike to build off of
@thomasmarquardt8435
6 жыл бұрын
Is he on Facebook so i could contact him
@TheHondaOutlaw
6 жыл бұрын
he is his page is Back porch customz
@shadysshow6877
6 жыл бұрын
What is your email I would like to talk to you about a few things on these Honda 300s thanks
Пікірлер: 54