Thank you very much for this video! Very detailed and well described process.
@martinezautodiag1670
5 ай бұрын
Thanks for the demonstration
@tousshong9438
4 жыл бұрын
Hehe! Love your pink plastic trims tool. I guess making it pink will go a lot easier on the paints and trims. Hahah JK. Nice works...easy to follow steps by steps. I'm sure if I have the tools I'll be doing my own calibration too.
@IbrahimBashir-lw3gl
11 ай бұрын
This is true work I like it Thanks for this one how can I buy it the radar tool sir Thanks
@janokhatchadourian2979
2 жыл бұрын
What program are you using on the laptop?
@zacharykelley359
3 жыл бұрын
Had a question , I was driving and there was somthing in the road and it hit the front of my crv, and I looked to see the damage and only thing missing was the cover for the radar, at first everything worked fine but few days later the adaptive cruse control doesn’t work now
@wedithbimsara6456
3 жыл бұрын
How to make alignment tool ?
@hjmohonda9821
3 ай бұрын
Superlative
@hewo-dekugacha1131
3 жыл бұрын
Saludos cómo puedo conseguir esas Piezza
@jimmykhong
Жыл бұрын
can you please do for 2021 honda odyssey my radar out for alignment
@mototaczki
4 жыл бұрын
Hi can you make video with 3pc 070AK-TYPA030 round targets.
@joselmendoza5763
11 ай бұрын
Have size of cone what kind material I can made ot
@piercezhang8153
7 ай бұрын
How much should the re aim process cost? My local dealer gave a quote of $894 for "wave radar bracket and clips and re aim", does this sound right? I personally think it's way off. Btw this quote does not include replacing the radar because they said the radar is working, just need to replace the radar bracket.
@eliommusk1585
4 ай бұрын
My dealership is charging me $209 just for recalibration
@mohammadamin2139
4 ай бұрын
how to get this radar aiming tool ?
@maridaliaventura9277
3 жыл бұрын
buenas me gustaria saber donde puedo conseguir el equipo y y la base para programar radales
@ProexExhaust
3 жыл бұрын
Hello. What are dimensiins of triangle?
@dainiusmazuika3364
2 жыл бұрын
Yep, it may be replicated by any metal sheet, even aluminum foil + cardboard would be enough, if geomatry of the target is known.
@r.samkamaleshan1569
4 жыл бұрын
Show the measurements of the target
@EpicStays
3 жыл бұрын
I have a question. Let's say hypothetically the car was in a minor accident ("fender bender") and the metal that holds the radar was slightly bent. Would this disqualify Honda or an auto shop from doing this calibration? Or can it still be done? Or does the part need to be replaced so that the radar sits in a correct "from factory" position?
@AA-sx5ti
2 жыл бұрын
@Da Vee Day! so there’s no fix?
@gpreed2004
Жыл бұрын
@@AA-sx5ti No It is a BS set up.
@alishahzad-USA
Жыл бұрын
what kind tool u use for scan.
@lard1892
6 ай бұрын
Autel Maxisys 908 will do this
@albertgiles5128
3 жыл бұрын
Where can I buy this
@josuem1846
3 жыл бұрын
Hello i will like to calibrate my honda Where are you located?
@chuckswhip
2 жыл бұрын
How much should this service cost?? And how many hours of labor are involved
@dainiusmazuika3364
2 жыл бұрын
130Eur in Lithuania, EU.
@MarioHernandez-bn6pm
Жыл бұрын
In USA I guess depends on the shop. I’ve seen ppl charge $200 and I’ve seen others charge $300+ .. im not sure what the dealer charges.
@marblehead2500
7 ай бұрын
$500-600 for mine.
@VVm-nu5vd
Ай бұрын
@@MarioHernandez-bn6pm I just qoute in Kentucky jackobson honda want $415 for aiming radar
@MarioHernandez-bn6pm
2 жыл бұрын
What software is this
@dainiusmazuika3364
2 жыл бұрын
Honda HDS
@alishahzad-USA
Жыл бұрын
any cheaper scaner tool
@nidalabedrabbo5324
3 жыл бұрын
Where can I get the target stand from
@paulschneeman1476
3 жыл бұрын
You can use a step ladder or, music stand or, make one from lumber scraps.
@dainiusmazuika3364
2 жыл бұрын
Any metallic part contained stand is a no go. All metals reflects radiowaves, this is why original stand is made from PVC!
@benaviv6833
4 жыл бұрын
Where can you buy the target
@jamestruxal103
4 жыл бұрын
Try HondaPartsNow.com. Service info lists the part# as 07AAJ-STKA220.
@mototaczki
4 жыл бұрын
Do you can give me dimensions of this marks? I was playing with hds and I screwed my static setup
@r.samkamaleshan1569
4 жыл бұрын
Show the measurements of the target
@jamestruxal103
4 жыл бұрын
I take the measurements and mark the floor in "Honda ADAS Radar Aiming Preparation". Hope this helps.
@r.samkamaleshan1569
4 жыл бұрын
@@jamestruxal103 yes know that and understand so good. But I have to know the size of that triangular tool and it's massurment.and thank you very much to spend time to my request.
@jamestruxal103
4 жыл бұрын
@@r.samkamaleshan1569 Much of our equipment and tools come from manufacturing partners. I do not want to jeopardize a partnership by posting the dimensions of equipment that was provided by our partner. I hope you understand.
@r.samkamaleshan1569
4 жыл бұрын
@@jamestruxal103 OK I understand. If you could please help me to find a tool dealer to get me one
@jamestruxal103
4 жыл бұрын
@@r.samkamaleshan1569 Try www.hondapartsnow.com. Part# 07AAK-5K0A200 or 07AAJ-STKA200.
Пікірлер: 49