thank you sir! this helped me remove the tank to install a quick shifter, edit: on a 23 CB650R
@ShedTorque46
Жыл бұрын
Love that..
@mikemorris1465
2 жыл бұрын
Great video, removing mine to replace brake lines with a full HEL set in purple 😁
@ShedTorque46
2 жыл бұрын
Nice Mike! Sounds mint. Thanks for the comment too!
@lockstocky2800
3 ай бұрын
Great video. I need to remove my tank to correct a shockingly poor paint job by Honda . The clear coat on the bike is like my daughters water paints at nursery 🤦
@ShedTorque46
3 ай бұрын
It's also as soft as cheese.. thanks for the comment dude.
@lockstocky2800
3 ай бұрын
@@ShedTorque46 random question - I have small spots of dirt actually inside my tft screen , can’t get to it but it’s annoying me . I presume it’s from condensation , the unit is sealed but not under vacuum. So annoying on a bike with 2k on the clock .
@ShedTorque46
3 ай бұрын
I have never opened one up, but I'm sure with the right tools and some care it can be done buddy.
@TheSweetasanut
3 жыл бұрын
Brilliant vid thank you
@ShedTorque46
3 жыл бұрын
Glad to help 🔧⚙️🏚️
@myrthebrandt4411
4 ай бұрын
Thanks! Very helpfull :) what brand and type mirrors are those you have on there? Looking for some solid ones that look cool
@ShedTorque46
4 ай бұрын
Luis Moto bar ends and mirrors. 🤟
@craigbarron5620
2 жыл бұрын
Excellent. Thankyou very much. 👍👍👍
@ShedTorque46
2 жыл бұрын
No problem Craig 👍 hope it helped!
@hamadalkandari362
2 жыл бұрын
Thanku
@ianmcgarrigle9510
2 жыл бұрын
the fuel pipe conection is less complicated than that , dont take the white clip completely out , lift it to unlock it then squese the sides of the black part with fingers "not pliers" ,, and the connection will spread and pull off ,,it just pushes back on and the white clip pushes in to lock it .
@ShedTorque46
2 жыл бұрын
The white clip should be replaced each time as per the handbook advice. I pulled it out for demonstration purposes. The black part as you say take more force than what you make out. I said in the video this is what the handbook says.
@ianmcgarrigle9510
2 жыл бұрын
@@ShedTorque46 i just had the tank off mine and to be honest honda are having a bit of a giggle with the fast fit connection on the tank ,,, iv worked in a bike shop for years and its normaly a one handed job to remove them on most bikes but MR honda likes to keep us on our toes ,, at least its not NS400 carb stub rubbers lol
@ShedTorque46
2 жыл бұрын
Ha ha yeah! You are right though, overcomplicating things just for the sake of it.
@vfrav8r
6 ай бұрын
my 22 CB1000r leaks at the connection - did it twice now w/ no luck. Thought the white clip fingers were bent but they all go straight thru..I'm ready for a band clamp and a shutoff valve- any suggestions?
@ShedTorque46
4 ай бұрын
Is there any damage to the o ring that's around the lower end of the valve? It shouldn't be leaking if the white clips and o ring are fine.
@scottamolinari
2 жыл бұрын
Did you empty the tank before doing the removal?
@ShedTorque46
2 жыл бұрын
No Scott no need. Half full. Fuel pump off. Slight dribble from tank.
@scottamolinari
2 жыл бұрын
@@ShedTorque46 Hey Thanks for the reply. And yup, I found out the "hard" way i.e. I didn't wait for a reply..... Hehe... I just followed the instructions you gave and off came the tank about half full and only a couple drops of petrol came out. Pretty cool. I'm putting a new wrap on the tank. I bought it with an all matt black wrap and that is too boring for me. Now it will have a cool Honda design... :D
@ShedTorque46
2 жыл бұрын
That's awesome. I really appreciate the feedback. Glad it worked for you! Ride safe.
@jaromor8808
Жыл бұрын
@@scottamolinari can you share the wrap? how to google it plz?
@scottamolinari
Жыл бұрын
@@jaromor8808 Here you go. kzitem.info/news/bejne/jm5-m6eQqnSZmX4
@Sexyoldgeraldorivera
2 жыл бұрын
Brilliant, thanks for the video! Just wondering, did you know where to find one of those clips that you removed 10:53?
@ShedTorque46
2 жыл бұрын
I'd have to look in the manual for it to be honest. The fuel line clip?
Пікірлер: 29