Nothing like that sound in the cool air, love it, could listen to it all day!
@txrick4879
7 жыл бұрын
Man you brought back memories i had 2 550s in my youth and they responded well to mods and had great sound .And they just worked.
@shreddedfitness9364
6 жыл бұрын
Dude I love your build !
@JohnCunningham-sy5ug
3 ай бұрын
Yes love the sounds had one back in my youth 😊
@LastDitchFinisher
9 жыл бұрын
Love everything about this bike! Cheers
@thekingofkings777
7 жыл бұрын
That thing looks and sounds absolutely fantastic wow. :o
@stephenfoley2839
27 күн бұрын
Looks great sounds sweet👍👍
@1badombre82
Ай бұрын
Amazing build! Ive got a sohc 750 and until now it was the best sounding cafe id ever heard with a short yoshi on it. But this sounds even better. Sounds just like a cbr600 rr accept when its in idle 👍
@lchen3194
8 жыл бұрын
Holy shit! That bike's sick!
@enricostrassnigg2614
9 жыл бұрын
awesome build
@claitoncali
8 жыл бұрын
Wooow, perfect sound!!!!!!
@bmine
7 жыл бұрын
Gorgeous bike bro
@peterroda4181
2 жыл бұрын
Wow. Lovely job!
@chrisl8818
4 жыл бұрын
Wouldn't change a thing, man; gorgeous build. I can only wish my KZ440 looks half that good once I'm done modding...lol.
@RustyOlive
4 жыл бұрын
Chris L thank you. Hopefully I can put her back together half as nice as she was before the accident.
@txrick4879
7 жыл бұрын
I had 2 550 they had push button start and worked well.
@mlmperez1114
6 жыл бұрын
Sweet ride👍🏻
@cameronbateman881
10 жыл бұрын
I bought a 18x5.50" blank rim From buchanans. Had them drill and punch the rim so i could spoke it to the cb550 hub. The swing arm I made. The off set rear sprocket carrier i machined. The front 3/8" off set sprocket is from cyclex.
@bobbygarrison3122
5 жыл бұрын
Sounds good.
@yeisonlazaro741
7 жыл бұрын
beautiful
@marcofernandeznunez2255
6 жыл бұрын
hermoso sonido saludos desde chile..
@Gabriel1237
9 жыл бұрын
What size back tire do you have installed. Also I love the seat cowl. Did you fabricate that yourself. I want my bike looking like yours. I have been searching for a seat similar to that one. It looks sick.
@olivergomez1191
7 жыл бұрын
Beautiful machine, what size are the rear shocks?
@RomVlad
7 жыл бұрын
Sweet! Sounds :)))
@kevinhsu7733
10 жыл бұрын
Lovely Bike along side with the red wing Boots , Keep up the good work
@RustyOlive
10 жыл бұрын
thank you Kevin. =)
@kevinhsu7733
10 жыл бұрын
Like wise
@Avus95
7 жыл бұрын
Very nice build. Bad starting habit though. At 0:29-0:31 you will see why most of these Hondas from the 60's-70's-80's have severely bent kickstands. The kickstand is designed to support the weight of the bike at rest. It is *not* designed to support the weight of the bike, *plus* the full body weight of the rider, *plus* the added stress of the downward kick. Put you leg over the bike, retract the kickstand, and start the bike like a normal person.... lol
@RustyOlive
7 жыл бұрын
Its my bike. I'll start it the way I want. Thanks.
@Avus95
7 жыл бұрын
+RustyOlive fair enough. But when your bike starts to develop that "gangster lean" while resting on the stand, at least now you'll know why... :)
@RustyOlive
7 жыл бұрын
+Avus95 its not a stock side stand. I made it. As the stock side stand wasn't the length needed. And its stronger than any cheap Japanese steel. The very odd time I do kick it over. Isn't usually this way. And now the bike has a cb650 motor in it.. It'll never be kicked over again as the 650's didn't come with kick starters.
@Avus95
7 жыл бұрын
+RustyOlive hahaha, hey man, no hard feelings here. As I said before I really do like the build. it must be sick with the 650 engine in it now! My current project ('71 CL350) has the aforementioned "gangster lean" and it drives me crazy lol. I'll have to look into fabricating my own side stand, that does honestly sound like the best option for me at this point.
@matahirhunzala8983
6 жыл бұрын
I lov3 this sound
@McLeodQuinn
7 жыл бұрын
Wow. That exhaust sounds awesome for a 550. Also that rear rim/tire looks way wide. Is that something other than stock? Nice ride. :)
@scottw550
2 жыл бұрын
Yes
@mara95channa
6 жыл бұрын
Good speed
@MriTryHard1232
7 жыл бұрын
what exhaust setup do you have on it? Header/Muffler combo? Thanks!
@alecsalazar859
8 жыл бұрын
Sick !!
@nourdeeneltaleb430
7 жыл бұрын
nice sound
@LuisRodriguez-cd9cq
7 жыл бұрын
I have a question... Wich kind of exhaust did you use in this cb550??
@locofoto75
2 жыл бұрын
That's a cool helmet
@OzcarMike641
3 жыл бұрын
Nice bike
@MugenAlt236
6 жыл бұрын
So you know of any good sources for cb500/550 bottom end rebuild parts ?
@trackingtim
9 жыл бұрын
Love that sound! Just wondering, how tall are you/how long is your inseam? I'm just trying to get a gauge of how much I'd have to make adjustments to a CB550 for my height.
@scottw550
2 жыл бұрын
about 30 inches
@CoastRider
4 жыл бұрын
wow nice bike bro
@supersportimpalass
8 жыл бұрын
That's gotta be the best looking CB550 I've seen on KZitem. Can I ask what rear springs you used?
@RustyOlive
8 жыл бұрын
Thanks for the compliment. It was a lot of work to get this far. The rear shocks came from a early 80's Honda XL500.
@supersportimpalass
8 жыл бұрын
+RustyOlive Thank you for replying back. I hope you don't mind I had a couple other questions. Regarding the Spin Werkes rims you mentioned in one of your other videos, are you running tubes in the tires with them? Also what hub are you using on the front? Any special details about the fitment? I'm looking at a hub from Cognito Moto but figured you must have used something else since it just became available last year or so. Thanks again.
@RustyOlive
8 жыл бұрын
+supersportimpalass sorry for the late reply. Yes, running Spinwerxs rims. 180 tire With tubes. Not running cognito hubs. I machined a new axle and brake adaptor plates. You can find most of the info on the Olivia "face lift" build thread on SOHCforum. Also, keep posted for Olivia 3.0. Lol the bike is getting a CB650 motor transplant in a few weeks.
@supersportimpalass
8 жыл бұрын
+RustyOlive Cool. 👍
@julianbenske7161
7 жыл бұрын
you absolutly fucked my mind its so beautiful ! In Germany a lot of things are Not allowed that you did on your bike wish we would have the Same laws here!
@jonezmusicgroup
10 жыл бұрын
I like the rear tire setup... Where did it come from? I have a 79 xs650 special that I'm building now. I thought about using the rear of a 95 cbr 600 on it, but I just can't make my mind up.
@RustyOlive
10 жыл бұрын
Jon. rear rim is a 18x5.50 Spinwerx blank from Buchanans. They drilled and punched the rim to lacing it to the cb550 rear hub. oversized stainless spokes and nips. Swing arm I made from scratch to fit the 180/55/18 tire. machined a rear off set sprocket carrier. and installed a cyclex off set front sprocket.
@v1ken
9 жыл бұрын
I still need to retune my carbs! fml
@0801johann
8 жыл бұрын
what year is it from??? :)
@isaiahblunkall8605
7 жыл бұрын
em1 civic sittin there...
@mugenized
10 жыл бұрын
Nice Bike! Looks like you're in the East York area. Curious to know how much it cost to have a bike like that built and who might I get in touch with. Cheers!
@RustyOlive
10 жыл бұрын
William. I built the bike over the last three years in between building other peoples bikes,... lost count of $$ that went into this one... to much is all I have to say. LOL but if you want one built. let me know. we can work something out in your budget.
@Moon-magic109
4 жыл бұрын
Damn.........👍
@brysonfrank6476
7 жыл бұрын
FINALLY!!! Someone with upside down forks.
@brysonfrank6476
7 жыл бұрын
PS What did the forks come off of?
@TTB630
6 жыл бұрын
No chin protection, solid mate, terrible rear light aswell.
@RustyOlive
6 жыл бұрын
Tylo good thing I built the bike for me then eh? Ha!
@chivers2011
3 жыл бұрын
MA GNI FIQUE !!!!
@nicelines7818
7 жыл бұрын
what rear wheel are you running to get the wide tier on it
@RustyOlive
7 жыл бұрын
Vance Lambert its a 18x5.50 rim drilled and punched to lace up to the stock cb550.
@ARWF1
6 жыл бұрын
RustyOlive where did you purchase it from?
@Winnecaferacer
8 жыл бұрын
👍🎱 seit wann fährt der Teufel Motorrad ? Eine super coole Maschine 👀👍.winnecaferacer.
@RustyOlive
8 жыл бұрын
I know of a few cb750's in Toronto for sale.
@omeryeniseker2609
8 жыл бұрын
+RustyOlive price ?
@leoleimgruber8148
6 жыл бұрын
eL nUbKer roughly 180 Kilometers per hour
@JordanCole.SaltandLight
10 жыл бұрын
Where are you located? US or Canada maybe? I would be interested in a bike. Modest budget however.
@RustyOlive
10 жыл бұрын
J Rad Man, Up in Toronto Canada.. where are you?
@JordanCole.SaltandLight
10 жыл бұрын
I'm in Hudson, MI. I suppose I could have it shipped..maybe.
@RustyOlive
10 жыл бұрын
J Rad Man LOL.. pretty far to ship man... I'm sure there's someone closer to you that can take on the job for less.. LOL I do appreciated the compliment and offer though. =)
@balmoralpjk
7 жыл бұрын
Do you by chance wear any Levi's jeans or a leather greaser type biker jacket?
@RustyOlive
7 жыл бұрын
Samantha Barton well.. i do own some Levis .. but I don't wear a greaser biker jacket.
@aarronmacias9856
7 жыл бұрын
Can I buy this tail seat section? Did you hand make it?
@RustyOlive
7 жыл бұрын
Aarron Macias sorry. Hand made to fit this frame exactly. No other copies were made.
@orvillets8818
4 жыл бұрын
Neighbour loves him
@RustyOlive
4 жыл бұрын
T Phas actually you’re right, my neighbours do love me.
@mrrychartth
6 жыл бұрын
what kind of exhaust you got
@RustyOlive
6 жыл бұрын
Modified Mac 4-1 headers. Reverse Cone pipe with Vance and Hines slip in baffle
@bodkinofnurk8898
6 жыл бұрын
Ni-i-i-ice...
@shawmaster97
6 жыл бұрын
What kind of rear shocks are those
@RustyOlive
6 жыл бұрын
Isaiah Shaw honda xl500 rear shocks
@RacecarDriver-sn9wt
8 жыл бұрын
I live in toronto and I'm in the market for a cb750
@visibilityzero1361
3 жыл бұрын
Swing arm? What kind...
@RustyOlive
3 жыл бұрын
Michael Combs I made mine.
@visibilityzero1361
3 жыл бұрын
@@RustyOlive i just bought a 78 550k, i want to put a tire that size on it.
@jozsefgal4885
Ай бұрын
😮😮😮
@alanrodriguez7341
3 жыл бұрын
Are you going to sell it
@RustyOlive
3 жыл бұрын
Never
@xandergoodwin8278
5 жыл бұрын
Any one know what forks he's running
@RustyOlive
5 жыл бұрын
Xander Goodwin i am running 2006 honda cbr600r forks
@xandergoodwin8278
5 жыл бұрын
@@RustyOlive thanks
@kritromulus6851
5 жыл бұрын
BierForce..WELL BLACK CAFE !?! )))) THE REAL ONE !!!! )))) HA Ha ha a a
Пікірлер: 101