Should have applied a touch of grease to the back of the pads to stop brake squeak. 🤔👍
@marciano8951
Жыл бұрын
What the disc size? Mm!
@dannyfrankham1051
2 жыл бұрын
That was so helpful. Thank you very much.
@zsinormotors
2 жыл бұрын
You're Welcome!
@stevejulian
Жыл бұрын
This was a great video and made it look like even I have a chance to do it. Thank you.
@plujudramunqk
2 жыл бұрын
I gonna do it myself tomorrow. Thank you!
@SibKrsk
3 ай бұрын
Horror, you don’t need to clean the rust from the calipers?
@Gshock714
Жыл бұрын
Torque spec is 80 ft lbs on the 17mm caliper bracket bolt that didn't look like it was 80 ft lbs I'd snug it up a lil more
@ohheysummoney6320
2 жыл бұрын
Insanely detailed video THANK U
@kirstypatchett3153
3 жыл бұрын
Hi what tool did you use to push back the piston?
@notbanksy8294
3 жыл бұрын
A pipe wrench? You can use a flat piece of metal and a c-clamp also.
@josephgarza5590
3 жыл бұрын
@@notbanksy8294 yeah I used a c clamp
@danmccaffrey2157
5 ай бұрын
A big pair of channel lock pliers should work, too
@OhBob420
7 ай бұрын
The first bolt I took of snapped in half. Now in fucked
@crunchyswanman3935
Жыл бұрын
Thanks mate!
@officialconsciouscommunity
Жыл бұрын
bleeding the brakes isn't a necessity?
@nicholasreif3443
Ай бұрын
I think my brake hardware is scraping the rotor. Driving me crazy.
@debann2864
8 ай бұрын
You didn’t change the clips or rubber boots and grease pins. Caliper look very rusty. Still thanks for the video.
@tinashemakosa
2 жыл бұрын
Great and amazing
@Mike3.666
2 жыл бұрын
17 mm was my breaking point 🤦🏾♂️
@brokestudio_
4 ай бұрын
should've cleaned the calipers 😫
@SssagaBenches4U
3 жыл бұрын
and i thought my '98 Civic was rusty. YIKES!
@jaimeventura4868
Жыл бұрын
😂
@ridergopalbhatt5769
3 жыл бұрын
Very Good sir
@jeffmerz3595
Жыл бұрын
Good lord that is one of the worst looking calipers I have seen, sheesh. Replace!
@richardfox3924
2 жыл бұрын
Just use Maul tools?
@gordogmc13
2 жыл бұрын
My civic rotors did not have the two screws holding the rotor in place. Is that normal?
@paul55767
Жыл бұрын
Yes Alot of cars don't have retaining screws
@G5Hohn
Жыл бұрын
The screws only carry the rotor load when the wheels are off. With the lugs torqued, the rotor is sandwiched in that bolted joint so the screws basically do nothing. They don’t do much, which is why many designs omit them.
@elvatoloco136
6 ай бұрын
how come when he removes the screws the rotor is loose
Пікірлер: 34