Thanks for this video, I changed the shaft using this technique, it was somewhat bent but before reassembling, I did a quick test of the shifting, still not going from neutral to 1st. Turns out, there are two little roll pins behind that star shaped wheel (2411kyk910 upper left) that were broken so the star wheel was out of sync. Also the holes in that part were elongated. I ordered the pins and the star wheel. There are five bigger ones that the fork fingers grab, they looked fine. I guess all those pins are designed to shear off so nothing expensive gets broken.
@skirrtentertainment6605
2 жыл бұрын
I just purchased a crf 110 and it is stuck in neutral. I have taken the clutch cover off and am now waiting for the special socket to come in the mail. Do you have any more information on what helped you fix this issue?
@motocrosschris6671
2 жыл бұрын
Very helpful video I appreciate the explanations
@lukefish7562
2 жыл бұрын
Tell you what would really help me out. If you’d just come do mine.😆 because I’m definitely no mechanic. Thanks for the video
@gotgreen1971
3 жыл бұрын
Great video, thank you 👍
@unlimitedmoto40
Күн бұрын
I couldn’t find the ruber gasket in the parts diagram. Any chance you still have it?
@spaceoven8788
2 жыл бұрын
I took apart my shift shaft to replace the seal but now it’s just lose and doesn’t want to get into a gear am i going to have to open the case to fix this problem
@666dynomax
Жыл бұрын
So nothing really holds Thad shift shaft in except when you put the case back on? Thanks for the video. I see the tools not that expensive on amazon is it just a 1/2 in or 3/8 inside is it??
@CooperRoberts-kq1ui
3 ай бұрын
Hey man i did mine using your vid but it’s shifting super aggressive and has like a metal shaving sound coming from the motor any idea what it could be ?
@nealrintaktm
Ай бұрын
Did the 2 clutches slide off together?
@zacharycash8543
Жыл бұрын
What special tool do you need
@anglegrinder4630
2 ай бұрын
The actual clutch behaves so weird on these(for the rei stall part),very touchy and VERY easily screws up,I ended up with a nightmare trying to install SMR KIT I bent not 1 but 2 or their steels,and thats not me,so
@RyanVist-dt6lu
Жыл бұрын
Yeah you don't need to bend every tab over one tab is to lock nut so it doesn't move.
@timsmith2357
3 жыл бұрын
Were do you get one of those special sockets & what size is it? Thanks
@supermanisweet
3 жыл бұрын
check ebay. they are the same for like honda 50s and 70s
@timlovelace5258
3 жыл бұрын
@@supermanisweet do you know what that socket is called?
@supermanisweet
3 жыл бұрын
@@timlovelace5258 just type in crf50 clutch socket on eBay and it will come up
@mklawncare3131
3 жыл бұрын
@@timlovelace5258 clutch nut socket
@kitwatson309
3 жыл бұрын
We need to know what size the inside diameter is in mm of each side of that socket. Because most online for sale are 20mm and 24mm. The 24 should work for the first nut you took off but the clutch nut seems to be like it needs about a 15mm or 17mm. I measured my 2019 crf110 and a 20mm would MAYBE catch the indentations. MAYBE.
@bradycoughlin5
Жыл бұрын
Do you have to drain the oil first?
@supermanisweet
Жыл бұрын
yes
@jacobgardner3700
4 ай бұрын
Does the bike have to be in neutral when u do this?
@jacobgardner3700
4 ай бұрын
Mine was in 4th when I bent the shaft and I cannot down shift it to neutral
@ruifreitas4
Жыл бұрын
Is it the same thing on Honda Z50a Mini Trail ?
@supermanisweet
Жыл бұрын
very similar. same concept
@dohicky9647
3 жыл бұрын
Your vid got me to the point I need to pull shifter arm out...but unfortunately mine is welded to the vertical part any ideas how I can get that out? Great vid by the way...helped alot
@dakotajames4180
2 жыл бұрын
Hey man what did you do for the welded piece? I’m about to take apart my 2019 and just wanna be ready for everything.
@BradleyHarding-ot2ez
11 ай бұрын
Any update
@dakotajames4180
2 жыл бұрын
How are you guys keeping the clutch and fly wheel from spinning when tightening or loosening the bolt? I feel like there’s a safer easier way than what I’m trying. Thanks!
@rhetthenderson5993
2 жыл бұрын
There’s a special tool, just google clutch holder tool.
@tysonpreston3854
Жыл бұрын
No just hold the flywheel while u take the nut off use a bigger impact
@skyler.miller1086
2 жыл бұрын
So I just did this and there was no change? Any idea?
@duramaxdad
2 жыл бұрын
Have u tried a Clutch adjustment?
@duramaxdad
2 жыл бұрын
Was the original bent or bad in anyway?
@skyler.miller1086
2 жыл бұрын
@@duramaxdad yea it was bent, I fixed it it was a broken roller pin in the shift drum, still dosnt feel right
@MrJamesTimmons
2 жыл бұрын
Do you have any play in that new shaft? Will it move much if you push/pull it? Mine moves a lot and has a hard time shifting.
@supermanisweet
Жыл бұрын
they have a little play when you push/pull. shouldn’t have a hard time shifting though..
@nickduarte1778
3 жыл бұрын
Welp...this vid came a little late 😂😂😂
@ryanurbis
Жыл бұрын
Torque specs ?
@bennyfs1436
2 жыл бұрын
“You can use a screw driver and hammer” buddie no you cant. Good video learned how to do it but you need that toold frfr
Пікірлер: 46