I mounted my 12" kickers in the trunk facing the quarter panels. I sealed off the opening by the taillights and foam-filled it to the just past the tire. This gave me a great port into the car. Very deep and punchy bass without the drivers being too close to me as they were when they were like yours. Plus I put my back panels back in with 6.5 infinity driver with crossovers and tweeter, same speakers in the door panels. My car shakes the neighborhood now, but when you look in it's not a thief magnet anymore because everything is hidden. I also didn't lose hardly any trunk space. I've had my del Sol for about 10 years and looked on youtube for many years to see how people did their subs, but finally realized most people are kinda blind lol. Look behind your seat belts in the quarter panels and you'll see there's a whole lot of room for the sound to pass-through from the trunk to the interior. I actually had to mod my trunk lid so it would stop burping the seal, that sounded like crap outside the car. My friend tweaked the hinges so the trunk would seal better and it stays dry now too, as most know the del Sol leaks like crazy. Just thought I'd pass on what I found.
@colorscream
4 жыл бұрын
This was the owners request. He had a subwoofer in the trunk but wanted to have 2 inside.
@ColettaHughes
4 жыл бұрын
@@colorscream I always wondered why people would want the subs right behind them so close like that? When you're that close to the drivers the bass gets pretty muddy while abusing your hearing even more. I'm 57 and listen to jazz and prog rock, so I'm sure there's something here that I can't identify with lol.
@colorscream
4 жыл бұрын
@@ColettaHughes Don't ask me. It was a request and it was fulfiled
@user-zs8sr9ex6j
5 ай бұрын
Cuáles son las medidas del cajón por favor
@kelvartis
2 жыл бұрын
Sick setup! I have something similar in mine but I did the back / top / in wood then fiberglass the rest to get the most box volume. Surprising you went with 12's, I only got 10's and the excursion is close to touching the seats.
@OldSols
5 жыл бұрын
Well this is dope AF
@colorscream
5 жыл бұрын
Thanks
@RustyNacho
3 жыл бұрын
Been wanting to throw subs in my del sol in the exact same place hahahah. Wanna save on trunk space cause I still want the car to be practical for summer driving and behind the seats seems the most practical... Sick build, thanks for the vid showcasing it🤙🏼🤙🏼
@colorscream
3 жыл бұрын
I wish i could give you the plans but i'm pretty sure i've deleted them ;/
@RustyNacho
3 жыл бұрын
@@colorscream it's all good thank you anyways hahah!! I don't like to straight up copy anyways just borrow inspiration and then come up with my version of the plan. I want to save my cabin space cause that storage is kind of useful but I can honestly just use the trunk if I put subs in the cabin... I'm thinking of building a sub box in my trunk to be honest cause I have a strut bar back there so I'll put it kind of around it to save trunk space but still have bangin speakers if I do it like that.
@RustyNacho
3 жыл бұрын
@@colorscream whatever I end up doing I'll tag you in it cause you're the one that inspired me to build the subs, a gnarly speaker truck sparked my love for subs but this vid inspired me to build my own box in the car🤙🏼🤙🏼
@ranellmccray7211
5 жыл бұрын
All that skill and good system but know good jams
@colorscream
5 жыл бұрын
I'm a basshead.
@PaulRJenkins
Жыл бұрын
looks nice, how did you do the H in the center
@TrackSol
3 жыл бұрын
Great craftsmanship on the box itself. Shame the lower part isn’t integrated well with the rear of the center console.
@BenyQuinonez
5 жыл бұрын
I really need to upgrade the stuff on my car. T-T I've been saying too much and doing too little.
@colorscream
5 жыл бұрын
Do it!
@mickeyyy7571
4 жыл бұрын
Would you produce these as a consumer product?
@colorscream
4 жыл бұрын
I don't think so. The market is small and the boxes are to heavy to ship
@enriquealvarado5755
5 жыл бұрын
Hey can you send me the measurements? I wanna do this on my del sol too😌
@colorscream
5 жыл бұрын
Hey, actally i dont have the measurements anymore, but the box was pretty easy to build. You have to take the plastics in the back, measure the width that is not obscured by the chassy, about 5cm narrower than the whole available width, the back was til the bottom line of the window and the front was a bit higher than 12". You have to keep in mind to cut the corner for the fuel line behind the drivers seat.
@enriquealvarado5755
5 жыл бұрын
@@colorscream did you measure the plastics in the back after taking them off??
@colorscream
5 жыл бұрын
@@enriquealvarado5755 all the plastics were removed
@enriquealvarado5755
5 жыл бұрын
@@colorscream for sure thanks man, how does it sound?😃
@colorscream
5 жыл бұрын
@@enriquealvarado5755 its damn loud :D
@C.p-q2x
Жыл бұрын
Hey would you be able to make another one and sale it?
@colorscream
Жыл бұрын
I dont have the blueprints anymore
@AutoBodyEverything
4 жыл бұрын
What changes did you notice in the cars driving and handling? How was the weight noticeable..
@colorscream
4 жыл бұрын
it was like extra 50-60 kgs so less than a passenger.
@sallutable8092
2 жыл бұрын
Is the box held down in any way ?
@colorscream
2 жыл бұрын
Many screws from the bottom and tight fit from the top
@axelvelarde1979
4 жыл бұрын
What size are the subs?
@colorscream
4 жыл бұрын
12"
@hackbraten5592
5 жыл бұрын
Das der Sub zu breit ist und auf der Mittelkonsole aufliegt gefällt mir nicht. Das hätte man besser einpassen können hinter der Konsole. Vor allem klappert und rappelt das bestimmt beim fahren und er wird ständig hin und her rutschen falls er nicht festgeschraubt ist.
@colorscream
5 жыл бұрын
hi, ist festgeschraubt
@meierhofer39
2 жыл бұрын
Do you still have the dimensions of the box you built?
@colorscream
2 жыл бұрын
95% chance that i dont have it. I need to check one hdd, mayby there it is. Maybe,
@jeremyjohnson8150
5 жыл бұрын
do you have the measurements for the box?
@colorscream
5 жыл бұрын
not anymore
@mac8315
5 жыл бұрын
How did u do the honda logo on the middle
@colorscream
5 жыл бұрын
a piece of thin wood cut with a knife form a paper template
@FiCClanTV
5 жыл бұрын
Bekommt man die sitze so eingetragen?
@colorscream
5 жыл бұрын
It's not my car but the owner had a thick folder of documents for TUV so I think there was a certificate for the seats.
@FiCClanTV
5 жыл бұрын
Colorscream alright big thanks bro!
@dyslexiic7342
5 жыл бұрын
Dimensions?
@colorscream
5 жыл бұрын
Dont know anymore, but it was full width of the back of the car and height, up until the window
@dyslexiic7342
5 жыл бұрын
Ok thanks man. I've been really looking into building one just kinda trying to get an idea. But yours has intrigued me the most so far.
@colorscream
5 жыл бұрын
@@dyslexiic7342 build the plastic out and measure the place
@dyslexiic7342
5 жыл бұрын
So remove the plastic from behind the seats and measure the area?
@colorscream
5 жыл бұрын
@@dyslexiic7342 exactly, check out my video of this place
Пікірлер: 56