This video was the only one that showed me exactly how it all went back together. It’s really hard to keep track when the whole thing falls to pieces when you take the two bolts off! Thank you!!
@sjsnopek
Ай бұрын
I really appreciate KZitemrs providing good quality how to information for fixings things at home that break. This is another fine example. Saves me a lot of money.
@a.saintango1311
Жыл бұрын
Had the same issue. The long double side hooked spring that goes around the choke rod broke. Replaced it and forgot how it all went back together. This helped a lot. Now the damn thing starts rough and I have to finger the throttle/choke arm once it fires to get in the proper rpm’s. Hell if I get another four years from it after nearly a decade I’ll be happy with that.
@yer6722
18 күн бұрын
excellent video, straight to the point, easy to follow, no bs like other videos.
@Bataha
18 күн бұрын
Thank you
@daveycrockett9447
Жыл бұрын
Amazing Video Bro!!! Did exactly what you recommended and after a few pulls it cranked right up. Running amazing. Same engine as on my Ryobi GCV160 pressure washer. Now able to pressure wash the house. Btw- my pressure washer sat to long abd carburetor was all gunked up.
@mattgargano23
11 ай бұрын
Thank you for this video. It fixed my surging engine
@Bataha
10 ай бұрын
No problem
@doncamp0114
Жыл бұрын
Nice job…thanks for showing this!
@rahim91a80
11 ай бұрын
You need to re-shoot this video. The camera angels are way off so most the time the viewer is looking at your arm or the part is cut out of the frame. Your explanations of what to do are clear and well done. You will get more views if it is easier for viewers to see the connections and parts clearly. I have worked on this carburetor and it is hard confusing so I appreciate your effort
@donaldchaplin3885
11 ай бұрын
Really appreciate this video. Thanks for the step by step instructions on reassembling the carb!
@Bataha
10 ай бұрын
Yes no problem
@herbertchang8472
8 ай бұрын
Great help. I'll do it on my mower. I'll wear gloves though when applying brake cleaner.
@mattwaters6987
Ай бұрын
Good job.
@richardkanady7466
4 ай бұрын
Another new carb fixed it, Amazon Cheap for Honda OEM. Still flushing jet and all else w carb cleaner on surging carb and still surged ? Thanks anyway.
@farscape1714
Ай бұрын
Help me: My mower after hitting a pipe the engine now revs why to high and makes the mower shake bad. Its the engine so please help.
@davea5150
8 ай бұрын
You didn't clean the emulsion tube holes with a pin or any needle type tool to make sure all the small holes are clear same in the main jet.
@Bataha
7 ай бұрын
Good point. I shot air down the middle of the tube. Mine didn't have anything in the side holes so I forget to mention to visually check them and spray those out if theres stuff in there.
@richardkanady7466
4 ай бұрын
Did exactly as you, failed to fix ! I just replaced carb, wax choke, last Apr and fixed it. But started surging < a yr of use. I’ll never buy a Honda powered mower again. I rebuilt carb on a Koehler motor and was forever fixed. Least Honda parts cheap online !! But makes no sense !
@noahnoah5268
3 ай бұрын
Make hole little bigger
@jamesagnew6512
Ай бұрын
Did anybody try Mechanic In A Bottle before disassembling the entire carburetor?
@Peter-bx3qk
7 күн бұрын
Thank you so much! Did you reuse gaskets or make new ones?
@Bataha
5 күн бұрын
Reuse
@ashleysumner6468
2 ай бұрын
After removing and cleaning my carb my govenor arm does not move? Plus it’s reviving very high any solutions?
@Bataha
2 ай бұрын
Make sure the gaskets are in order and sealing. Next check the throttle linkages and springs, make sure they are in the right holes, and not broken or hanging up.
@sekaf4125
2 ай бұрын
appreciate the video. took mine apart/cleaned it good. Got it all back together and it's running WAAAY FAASSTT. took it apart and back together. same thing. it runs on first pull but its idling at high RPM. Any thought what I did wrong?. appreciate your post!
@Bataha
2 ай бұрын
Make sure the gaskets are in order and sealing. Next check the throttle linkages and springs, make sure they are in the right holes. From there check the idle screw.
@sekaf4125
2 ай бұрын
Found the problem. Old smashed gasket next to engine. Governor are barely hitting it. New gasket runs perfectly!!
@stevenlengyel9701
11 ай бұрын
Ha ha my pressure washer used to sound just like this lawnmower
Пікірлер: 32