Replace gaskets off carburator I have same lawn mower , with the problem, I replace carburator gaskets, and now working very good.
@KirbyVacuumCollectorFixer
4 жыл бұрын
Hopefully you got it fixed and running ok. I have a 1985 Honda HR214SXA and a 2019 Honda HRX217HYA. Such good mowers.
@ClassicTVMan1981X
4 жыл бұрын
I hope that governor was fixed. It should be running at 3100 RPM at full throttle, give or take.
@nolongeravailable7349
9 жыл бұрын
clearly one of the problems in the spark plug sitting on the mower deck lol
@Hollowalone1
9 жыл бұрын
+Maui Landscape & Lawn lol i only wish that was the issue. havent even worked on it in weeks. figure it will be a winter project
@DP-hy4vh
4 жыл бұрын
Try some WD-40 on the carb throttle and on the pin that holds the end of the plastic flywheel vane. I also manually moved the throttle back and forth with my finger to rev up the engine while it was running. This did the trick.
@farissorour8279
4 жыл бұрын
That is the carburetor small secondary spring stretched out, you need to make it a bit shorter to have enough tension
@parachuteescalante9672
Ай бұрын
Buenas noches como es el sistema de encendido ? De esa podadora de sesped
@ronnormson
7 жыл бұрын
Have you found a remedy? Update us,Please! I have similar issues but my HR21 will not die. I used carb cleaner to check for vacuum leaks. There are leaks so i need to make some gaskets. Then see if it works. Go to LawnMower forum. Read up on the HR21 autochoke system. I believe both our symptoms is called"Hunting". Ronn
@SCraig-Handsome
4 жыл бұрын
There was a recent issue with the governor spring, mine is the new 13 coil spring
@ThePioneer00
3 ай бұрын
Hey Shayne, I’m looking for a carb and coil for this, do u know which carb and coil that I need
@GladiatorReid
4 жыл бұрын
I'm hoping to change my the drive belt on my HR21, do I access it from top or bottom?
@jasonwb6884
6 жыл бұрын
Was it a problem with the govenor?
@timcolehan4135
4 жыл бұрын
Did you ever sort the issue? I just bought one of these:)
@Hollowalone1
4 жыл бұрын
Tim I ended up buying a new carb
@timcolehan4135
4 жыл бұрын
@@Hollowalone1 Thanks sir. I am stripping the carb down on Friday. Got parts coming from all over the world for mine as a lot of them are discontinued. Is yours still running?
Пікірлер: 16