The spinner cover was reinstalled the wrong way round, this will have a impact on how it seals on the gasket
@stratblacknosugar.5125
6 күн бұрын
Very informative, doing this job tomorrow.
@mikekapuxa
Жыл бұрын
My friend you put The spinner cover backguards ahahahh
@DeanAllen
Жыл бұрын
I think you mean backwards, I know, but like yourself, it makes no difference ahahahh
@tailtidy8185
2 жыл бұрын
Such a great informative video. Great looking Grom as well👍👍
@DeanAllen
2 жыл бұрын
Thanks mate, really appreciate that. Glad it can be of help. Yes, love that Repsol scheme.
@johnshanks7902
Жыл бұрын
Thought u said after putting thread lock on spinner bolts do not put oil in for 24hours
@jojo-dn7qb
2 жыл бұрын
the bike doesn’t need to be level when removing screws. only when draining oil and/or checking levels.
@DeanAllen
2 жыл бұрын
It needs to be level as best it can for the oil to drain down to the lowest point (the drain plug) before you get to undo it, while the oil is still warm. The video is all about the oil change !
@ellisberry8747
2 жыл бұрын
Legend bro
@DeanAllen
2 жыл бұрын
Thanks Ellis, hope you found it useful ?
@ellisberry8747
2 жыл бұрын
@@DeanAllen yes bud,I’ve been installing a modified oil pump today,along with doing a spinner and filter clean. The angles you’ve gotten really are impressive. Most videos you kind of have to guess what they’re doing. But I was able to follow along easily here ✌️ Much appreciated mate.
@elsocio666
2 ай бұрын
Otro autodidacta que monta la tapa del filtro centrifugo en forma de estrella al revés!!! 😮😮😮
@BHPBikesuk
2 жыл бұрын
the oil spinner went on the wrong way round....
@DeanAllen
2 жыл бұрын
Please elaborate I took off the three holed plate, and removed the gunk as shown, never removed the actual spinner which was on from new ?
@DeanAllen
2 жыл бұрын
I see what you mean, the plate was put on in reverse luckily it still seals the same against the metal seal behind, with no adverse issue. Well spotted and my mistake, I will have to make good all the same, and thanks for pointing this out.
@BHPBikesuk
2 жыл бұрын
@@DeanAllen have a look at that cover plate.... 20:29 in the video... then 27:10 the latter is wrong
@BHPBikesuk
2 жыл бұрын
@@DeanAllen I cant see how it seals... but not really oo much of an issue...
@hfjchan
Жыл бұрын
LOL I would have put it in the same wrong way doing it while watching the video😅
@jayvee1901
2 жыл бұрын
should you clean the oil spinner filter or replace it. If i should clean it how should you clean it? thank you for the video!!
@DeanAllen
2 жыл бұрын
Only need to clean the sludge from it as shown in the video. Also clean that wire screen, this is in effect your filter. Regular, and correct oil changes will do the rest. Enjoy Gromming !!!
@jayvee1901
2 жыл бұрын
@@DeanAllen appreciate the reply!! managed to do it. Ended up getting a new screen. Thanks for the tutorial
@mickmcintosh4736
2 жыл бұрын
Other than when you started undoing things with a torque wrench and put the spinner cover on backwards it was more or less alright.
@DeanAllen
2 жыл бұрын
Steady lad, you don't won't to let your guard down, and allow a compliment to slip out !
Пікірлер: 24