Yet another great video on the Rebel and tools. Thanks and keep it up!
@SLIGHT_
2 жыл бұрын
Thanks for the kind words.
@BensDad2003
Жыл бұрын
Thanks for the review Slight! Informative and well done as always👍
@SLIGHT_
Жыл бұрын
Thanks dude. Appreciate the continued support.
@christopherravins3937
2 жыл бұрын
Thank you for this, been trying to find some decent stands here in Ontario but with minimal luck!
@olironrider8918
2 жыл бұрын
Nice demo.. 👍👍
@SLIGHT_
2 жыл бұрын
Thanks
@IAMMRLIMA
2 жыл бұрын
WHATS uppp broooo. I really miss my Honda rebel
@SLIGHT_
2 жыл бұрын
Sure you do… lol… then you jump on your Ducati ahahah
@IAMMRLIMA
2 жыл бұрын
@@SLIGHT_ 😂 I’m serious 😂 my back hurts lol. I want my comfy seating position and relax throttle. Sometimes I think the Ducati is mad and what’s to kill me 😂
@michaelscott9773
Жыл бұрын
All KZitem videos about using a paddock stand on Honda Rebel never show the exhaust side-- and that's were the problem is with these stands- with the oem exhaust on the paddock stands catch on the exhaust without some modification - as anyone done this? 2022 model.
@SLIGHT_
Жыл бұрын
The rebel 300-500 does have this issue. In order to use these stands with the oem muffler you need to loosen and turn the muffler out. T. rex racing has a spool kit for the rebel if you wish to keep the oem muffler and switch to the spool kit design of this lift. www.t-rex-racing.com/2017-2020-Honda-Rebel-300-500-Spool-Adapters-p/n27-18sa.htm
@michaelscott9773
Жыл бұрын
@@SLIGHT_ Well thank you very much for that information- I will look into it.
@ianb2877
2 жыл бұрын
I tried some paddock stands for the rear, but the stock exhaust sits lower than the frame, so was impossible to get the pads to sit on the swing arm properly. Is that why you did the modification to the exhaust side of the stand? Is it a stock exhaust?
@SLIGHT_
2 жыл бұрын
It is not the stock exhaust, the modification I did was only to hold the one side in (makes it easier to use with one person) With the stock exhaust you can loosen the muffler and move it to the side. More work… but unless you’re using the T-Rex spool kit, that’s the only way to make it work. Hey… excuse to modify the muffler right. Lol.
@daddyblunt8824
9 ай бұрын
I wonder the rear stand on the exhaust side, how it looks if I keep the original exhaust, it seems like doesnt't have enough room.
@SLIGHT_
9 ай бұрын
It does not work without moving the stock exhaust. Aftermarket mufflers work
@merlepittman5622
11 ай бұрын
You didn't even show the exhaust side on the rear which is the common problem with the Rebel and paddock stands.
@SLIGHT_
11 ай бұрын
kzitem.info/news/bejne/yqmclp2GfnenfoYsi=nhMyDeP_sLQWvnIX At time mark 3:58 it shows this.
@merlepittman5622
11 ай бұрын
@SLIGHT_ ok thanks. But I notice you have an aftermarket exhaust. The factory exhaust is much larger and causes issues with most rear paddocks. I have an 1100 and cannot find proper paddocks to work with stock exhaust. There is one from Pit Bull that they claim will work but it's pretty pricey.
@SLIGHT_
11 ай бұрын
@@merlepittman5622 you’re correct with your assessment on the factory exhaust. To use any of these stands on the 500 you need to either have an aftermarket muffler or move it. As for the 1100. These stands do not work on the rear as the swing arm is too wide.
@PerfectStranger1
5 ай бұрын
@@SLIGHT_ I notice on the exhaust side, the paddock stand is cut on top, on the thing that sits on the swingarm. I thinking of doing just that!
@pasqualecaiazza4207
Жыл бұрын
I wanted to ask you but the rear stand you propose for the Honda Rebel does not seem compatible to me as the bike's exhaust touches the stand.
@SLIGHT_
Жыл бұрын
Loosen the hanger nut and lower pipe clamp. Twist the muffler out and this works. Unfortunately there is nothing I’ve found for the rebel with the stick exhaust. Minus spools from TREX racing.
@pasqualecaiazza4207
Жыл бұрын
@@SLIGHT_ Thanks, I'll try
@_PredatorPH
6 ай бұрын
Hey man, I'm from the Philippines! I've been watching your playlist about rebel maintenance... By any chance, do you have a video checklist or some dealbreakers when buying a used rebel 500? I'm planning to buy a used model, like a 2020+ for my first big bike
@SLIGHT_
6 ай бұрын
I do not… yet that’s a great idea. I’ll add that to the list. Thanks for the suggestion. Would you have any specific questions? I may be able to assist you.
@_PredatorPH
6 ай бұрын
@@SLIGHT_ I have no idea tbh... But maybe a content that can help a buyer like me on how to distinguish a good used rebel to a bad one? Like for example, the sound of a good engine or what the HUD should look like when the rebel 500 is in good condition. Thanks in advance! 🔱
@MitchKnep
Жыл бұрын
What is the saddlebag on the side? I really like it!
@SLIGHT_
Жыл бұрын
It’s made by willie and max. (Swing arm bag.) link in description. kzitem.info/news/bejne/0Z5v3WSVnnuThHo
@kennethjohn4668
2 жыл бұрын
When I put the rear in, it’s a bit crooked. Any advice how to put it up straight?
@SLIGHT_
2 жыл бұрын
The bike does lean to the left side… so you can either have a friend hold it up so you can get under the arms. Or… like me… I lift with the left side first while I have the arm on the right. When it gets close enough… both wheels (on stand) touch the ground and you can lift up. It’s hard to explain. If you are still having issues let me know. I will make a quick video and link it here for you.
@kennethjohn4668
2 жыл бұрын
@@SLIGHT_ I had my wife hold it straight and then I put it on the stands. It’s nice and centered now but I’d like to figure out a way to do that on my own lol
@fra76able
Жыл бұрын
Ciao!!!il cavallettonda fastidio sulla parte dello scarico???
@SLIGHT_
Жыл бұрын
non sono sicuro che la traduzione fosse accurata... stai chiedendo se il cavalletto entra in contatto con lo scarico? con la mia configurazione no. tuttavia, se hai lo scarico di serie, dovrai spostare la marmitta lateralmente per usarla.
@fra76able
Жыл бұрын
@@SLIGHT_ la marmitta é di serie
@SLIGHT_
Жыл бұрын
@@fra76able poiché la marmitta è standard, sarà necessario allentare il morsetto inferiore, svitare il bullone delle staffe superiori e ruotare la marmitta. Fatto ciò, il supporto funzionerà.
@jopierre17
2 жыл бұрын
Do you know if they work for the 1100?
@SLIGHT_
2 жыл бұрын
I don’t know for sure. Yet the 1100 swing arm is wider. Making me think it will not. Let me do some digging. If I find something I’ll let you know Edit: they will not work for the 1100… only the 300 and 500 in this grouping.
@my2wheels
Жыл бұрын
Would this be good for the Rebel 1100?
@SLIGHT_
Жыл бұрын
Unfortunately this only works for the 300 and 500 rebels. The 1100 is too wide.
Пікірлер: 45