Please do! By the way I loved your rear strut replacement video on the 7th gen. Don't think I'll try that repair as I live in the rust belt and don't have the tools or know how to get them off.
@dr_920
5 жыл бұрын
Yes, please.
@kododiddo3498
5 жыл бұрын
yes please
@heyitschinoable
5 жыл бұрын
Big Dog50001 Automotive film it!!! 👍
@Kons213
5 жыл бұрын
Film it brother, we can never have enough visual help. Thanks for your work!
@BigDog50001
5 жыл бұрын
Thanks for the comment!
@lovescherylblossom3441
4 жыл бұрын
Glad someone finally solved the problem. I’ve been having the exact problem as you described but could not find the source. Thanks a whole lot.
@BigDog50001
4 жыл бұрын
Glad it helped, thanks for the comment!
@Alep493
3 жыл бұрын
@@BigDog50001 hi please recomend me engine oil Honda civic 1.8 v 2007 India
@josephcalvosa8272
4 жыл бұрын
That's my new favorite trick , thanks buddy. I have a tip I can offer in return, if you're wondering if the engine mount on that Honda needs to be replaced, it does.
@BigDog50001
3 жыл бұрын
👍
@tonyjordan1320
4 жыл бұрын
I just replaced my side mount and the torque rod, I had a vibration at idle and used your other video for replacement guidance but it also took out my clunking noise when I hit a bump which I wondered what it was, I replaced the front struts last year and thought one was bad.It took me longer than your video-lol-but I was able to replace all of the parts and I'm now good to go.Thanks for your helpful videos, they are a big help.....
@BigDog50001
4 жыл бұрын
Glad it helped, thanks for the comment!
@samwisegamgee289
4 жыл бұрын
at this point I dont understand 31 people not liking this video,maybe they are all service shops who dont want you informing people about such a simple solution and would rather scam you and double the repair cost,or am I just wrong..please feel free to show the proper repair,visual information with verbal description makes it easier to grasp the finer details of this fix
@BigDog50001
4 жыл бұрын
I guess I can't please everybody lol. I appreciate the comment!
@rmatt53
2 жыл бұрын
My noise was the tensioner being lose, be sure to check if its vibrating and making the noise before you go replacing the engine mounts like me. I was able to put a stick on the tensioner bold and felt the vibrations, can't believe I didn't think of that before.
@BigDog50001
5 жыл бұрын
Here is the fix: kzitem.info/news/bejne/moyAqISFmHmdm4I Be sure to subscribe for more tool and car repair videos! kzitem.info twitter.com/BigDog50001 instagram.com/bigdog50001/ Disclosure: This channel earns a small commission using some of these links - at no additional cost to you. The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive
@BigDog50001
5 жыл бұрын
*Tools* Autel MS906BT (Updated Version of the one shown): amzn.to/2LufviE The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive
@financier7634
5 жыл бұрын
Always appreciate your repair videos. You’ve saved me tons of money and countless hours of frustration. Thanks!
@BigDog50001
5 жыл бұрын
Thanks for the comment, I appreciate it!
@BigDog50001
5 жыл бұрын
Be sure to subscribe for more tool and car repair videos! kzitem.info twitter.com/BigDog50001 instagram.com/bigdog50001/ Disclosure: This channel earns a small commission using some of these links - at no additional cost to you. The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive
@ramirbautista
5 жыл бұрын
A simpler check will be the gap between the rubber and the aluminum support, no gap or if there touching you need to replace it. The one installed has no gap, the new part you have does.
@BigDog50001
5 жыл бұрын
That's part of the visual inspection, thanks for the input.
@JankyDubz19
4 жыл бұрын
I had the same problem about a few months back. The way I found out it was my mounts was because of my exhaust. Every time I started up my car the drone would be so loud inside the car. I thought this was normal because I had recently put a skunk2 exhaust on. After replacing the mounts and starting the car it sounded like I was in a hybrid all of a sudden.
@mattbickford2640
4 жыл бұрын
3:13 vs 4:03 not an uncommon issue, i use the "wear indicator" to determine if the mount is "sunk" and its actually the metal bar that you can see has rubbed on the mount and i will use that to determine its condition, otherwise you could always put a block of wood on a jack and jack up the oil pan and see if the problem "goes away", usually you get "excessive vehicle vibrations" and sometimes it happens more in reverse because of that mount failing, great video! just wanted to add another quick tip with the "wear indicator" i use, hope it helps someone else out there, thanks for the share!
@BigDog50001
4 жыл бұрын
Thanks for the input!
@kylebales5329
4 жыл бұрын
Generally the symptom on those is a nasty vibration in gear and you dont have to torque them to see that they are bad. The mount collapses and the aluminum bracket on top touches the mount itself. Also, I have never seen one of the torque mounts go bad or had to replace one. Save your money. 22 year Honda tech. Good video for the DIY person though.
@BigDog50001
4 жыл бұрын
👍
@gianellicapone8740
4 жыл бұрын
Did the mount move? Yes? Good job boys&girls.🤣
@markpaul8178
2 жыл бұрын
My 2007 1.8 L civic has a small vibration when I stop in traffic coming from the right side When I give it gas and take off the vibration stops.I will check motor mounts.Thanks for the tips,brother.
@dilshah
3 жыл бұрын
kindly film your repair of the engine mounts and torque rod . Love to see u doing it . Bless your heart
@BigDog50001
3 жыл бұрын
👍
@TheDisgruntledMechanic
5 жыл бұрын
Heck yeah show the repair! Love to see some of those tools in use!
@BigDog50001
5 жыл бұрын
lol thanks for the input Mike!
@lawrencepellegrini2687
2 жыл бұрын
Great Video, my 08 Civic is getting a sharp clicking or metal snappy sound from the right front as though something is separating. Also, when steering to the right only, it lurches over much more that the steering movement allows, Has 130K on it, very tight otherwise, thinking strut mount or rack, thank you.
@Judedudenkelly2
3 жыл бұрын
I have an 07 civic hybrid and yes the motor mounts can go badd that's a good to find the crack in the motor mount. I had to replace the left side motor mount it was little bit of work but it idles much smoother now…
@AntonioClaudioMichael
5 жыл бұрын
Film the repair bro
@phillr3
5 жыл бұрын
Good video. Wish I could've seen repair vid before I replace engine mount last weekend. Bolt to fender would not fully seat. Hope I used correct bolt.... did not pic removals.. my bad. Did run much quieter though and that's a good thing. Just want to complete job correctly....
@BigDog50001
5 жыл бұрын
Thanks for the input!
@gzhang207
3 жыл бұрын
Nice diagnosis. Can you show the same symptoms by switching gear between R and D?
@thetruth7633
Жыл бұрын
Aftermarket mounts have different durometer rubber specifications, causing vibrations. Honda is expensive but smooth.
@rondail5675
5 жыл бұрын
Thanks for the video. Film the repair, always nice and appreciated. What I don't like on my 2015 Civic, is the clunk from the rear brake pads moving. Dealer says it's normal. Maybe I will change to non-Honda pads in the rear. The clunk has always been there from new and I only have 7800 miles.
@BigDog50001
5 жыл бұрын
I was actually getting ready to do a quick video on the brake clicking, thanks for the input!
@jasonle8950
2 жыл бұрын
Awesome tips Big Dog, always appreciate your videos. You should do the Transmission mount replacement next, it rarely ever goes bad. I would like to add another tip that will help identify if the Passenger side motor mount is bad. @1:48 time frame, you can see the vertical metal piece is touching the rubber lower mount. THAT vertical piece is mount indictor that its either too low or touching the rubber mount. If you can't fit 1 quarter in their, it is bad. If you CAN fit 2 quarters, its about to be done for. I just replaced mine and did a before and after visual inspection and found the new one can fit about 5 quarters, no more vibration at cold start, at idle, or going down hills or over bumps. Hope this small info helps someone.
@LaplacianFourier
Жыл бұрын
Why would there be vibrations from cold starts and not normal starts?
@NinjaRastaMon
9 ай бұрын
cheers
@theejoeylee
2 жыл бұрын
I know this video is 3 years old, but to anybody tempting this repair please use OEM Honda parts. Like you said for some reason the aftermarket ones don't line up especially the Anchor Brand I had multiple returns and couldn't get the holes to line up so I just filled my OEM One with window weld!
@elipearson5294
3 жыл бұрын
I have an 08 civic lx and the digital display goes in and out as far as the speedometer and engine temp and fuel level and sometimes the low fuel light blinks even though I had just filled up. Any help would be greatly appreciated
@arthurfricchione8119
5 жыл бұрын
Dave just to be on the safe side I hope you moved the coffee mug in case the car jumps and hits the bench. Safety First! That mug will make one helluva thump. Just joking good video ❤️️ Film the repair. Dave do go pro cameras make the job easier. My CV joint will not pop out. I think I'll film it and it should pop right out. Long day will try again tomorrow 👍
@BigDog50001
5 жыл бұрын
I always keep the coffee out of harms way! Sometimes those C clips holding the axle in can be a bear, both taking them off and putting them back in. Thanks for the comments as always!
@EaStxVaNxiNc
Жыл бұрын
When your replacing this always best to replace the Lower vibration mount also its no good at this point also or else you will get vibration noticeable on dashboard when not driving
@tankk223
3 жыл бұрын
Thanks for the video. Having the same problem now with my civic. Think this is where I am going to start.
@purpledonatello
5 жыл бұрын
I would like to see you film on repairing this mount. Seen many videos of different procedures like certain bolts take out in order, engine drops back when removing mount due to not jacking engine correctly, etc. I want to see the reassemble because bolts don’t line up correctly. Some say taking out the bracket or jacking up engine will do. I’m all confused who to listen to.
@BigDog50001
5 жыл бұрын
Didn't realize there was so much misinformation, thanks for the input!
@Marie15a
4 жыл бұрын
Hi thank you for the video. I have a 2003 Honda Accord. A couple of weeks ago my mechanic had to change out my water pump and my timing belt when I got the car back there was major vibration and sound that I felt all over the car. I went got brand new tires but I still felt and heard a thumping, it was in sync but now it is only in the pedals and in the floorboard. I went and got my alignment done and I got my brakes and rotors changed. I still hear and feel the pulsating thumping. At any speed. It slows down or speeds up with the cars speed. It still does it coasting in neutral. But not when parked in neutral while pressing the gas. I tried the thing you did with the car sitting still but in drive and pressing gas and brake simultaneously and the thumping sound and feeling are there. But the sound is not loud, but I know it isn’t supposed to sound or feel like this. Something is wrong. What do you think it is?? I’m scared to drive the car!
@adalbertovalencia7862
3 жыл бұрын
Honda motor mounts are expensive!!! but its worth it...
@BigDog50001
3 жыл бұрын
Thanks for the input!
@user-ds6bx4gn7i
4 жыл бұрын
Well done mate!A very good video!Quite useful!
@BigDog50001
4 жыл бұрын
Thanks!
@monyetmm
5 жыл бұрын
Yes, please film the repair
@BigDog50001
5 жыл бұрын
Thanks for the input!
@brandonblount4170
4 жыл бұрын
1:48 and 4:00 Pro tip. See how the metal tab on the side of the motor mount is resting on the rubber? Compare this to the gap on the new (revised) mount. Watch for the witness mark as the mount opens and closes. As a Honda tech, this was a dead giveaway that the mount had completely collapsed. (Yes it can also make noise/be bad when it is 75% or so collapsed as well)
@BigDog50001
4 жыл бұрын
Thanks for the input!
@jesuszuniga1257
Жыл бұрын
Hi can I drive with a motor mount that makes a clunking noise intermittent. Honda dealership installed a aftermarket motor mount because oem is backorder. Was told by Honda technician that I can drive with the motor mount only issue would be the noise. Engine doesn't move when shifting to reverse or drive
@brandonblount4170
Жыл бұрын
@@jesuszuniga1257 can you drive with a bad mount? Yes. Should you drive with a bad mount, no. This puts more stress on other components, such as the other mounts, air intake tube, exhaust flex pipe, wire harness, ect.
@jesuszuniga1257
Жыл бұрын
The only reason I'm asking is because honda oem motor mount are backorder. When I went to pick up car for diagnosis they said I could drive but the only thing would be the noise . Check the motor mount and engine is not moving at all its just noise
@jesuszuniga1257
Жыл бұрын
Was told by honda advisor that I could order a oem motor mount online but wouldn't warranty the labor and part and that the noise would not go away
@williammizebee
Жыл бұрын
Mine doesn't clunk or shake it misfires pcv valve? But no one want to survive it cause it's not convenient location like other Hondas civic 02 😢😮😅😊 this model years 07 thru 2011 were junk I think bad oversteer side a the road steering curves forget it
@Oscar93646
4 жыл бұрын
Would have liked to hear the "clunking/thumping" noise it was making.
@BigDog50001
4 жыл бұрын
Unfortunately is is tough trying to get the camera to pick up noises like that.
@DavidCoffill
5 жыл бұрын
Dog, the tool man!😉
@BigDog50001
5 жыл бұрын
lol
@vtecaccord96
5 жыл бұрын
Yes film the repair!!
@BigDog50001
5 жыл бұрын
Thanks for the input!
@remelitomendoza6666
4 жыл бұрын
Hope u change also the transmission mount on the driver side. And the mount under the transmission side.
@DIRTDIVER882
2 жыл бұрын
Yeah id def like to see this repair .i know im late to the party but hey better late than nvr 🤷♂️
@79miguelong
4 жыл бұрын
Yes show the repair please
@BigDog50001
4 жыл бұрын
Here you go! kzitem.info/news/bejne/moyAqISFmHmdm4I
@wyattoneable
5 жыл бұрын
More tools mean more work in your future. They are the pathway to frustration and aggravation, but ultimately we keep buying them because like a woman, we can't live without them. (ha ha)
@BigDog50001
5 жыл бұрын
lol! Thanks for the comment Wyatt!
@jondoh3471
Жыл бұрын
check the exhaust fluid reservoir.
@rohankhemraj
5 жыл бұрын
Great video. Any chance you might film a how to on removing the rear coil springs?
@BigDog50001
5 жыл бұрын
If I get one in that needs it, I will try and film it. Thanks for the comment!
@noseandfins1
4 жыл бұрын
how to check on manual transmission?
@rockybalboa2151
3 жыл бұрын
Hi mines is making a warping sound when I put on drive and after I hit high speed it stops.almost like helicopter
@Galacticaxis
4 жыл бұрын
Awesome test to see if the mount has gone bad ! I'll use that today. I have a strange sound though that sounds like it's from the front right side wheel area, when I drive it makes a gear whurrring sound. It is steady and increases with speed and descreases when i slow up, but it's very steady...does anybody have any ideas?
@BigDog50001
4 жыл бұрын
I would have to hear it to give more advice. Getting the car in the air and doing a visual inspection can reveal a lot in those situations. Thanks for the comment!
@Galacticaxis
4 жыл бұрын
@@BigDog50001 I bought some jackstands yesterday and doing that tomorrow for sure. The more I have searched I think it might be where the CF CV or whatever goes into the transmission and it's pull out a little, but I can't find any sound samples. Check it out, a website for sounds that need repair. That would be cool...or not? :) thanks keep up the good work.
@ronwitcher7117
3 жыл бұрын
Thanks for sharing, very informative.
@BigDog50001
2 жыл бұрын
No problem, thanks for the comment! 👍
@jptrainor
5 жыл бұрын
Yes, film the repair. And demonstrate the test on a manual when you get a chance :).
@BigDog50001
5 жыл бұрын
A little more fun doing it on a manual transmission, thanks for the comment!
@brock4629
4 жыл бұрын
@@BigDog50001 I would like to see that. Never came across in the shop only autos with mount issues
@NoName-is6py
7 ай бұрын
In my case it was a loose bolt that holds the rubber mount at the back.. It did my head for about 6 months..
@BigDog50001
7 ай бұрын
Thanks for the input!
@jrobles893
5 жыл бұрын
Yes film the repair
@BigDog50001
5 жыл бұрын
Thanks for the input!
@Ahmedpakido
4 жыл бұрын
No my friend it is not broken i have done same thing with my civic and the noise was still there and yes the you do that engine is gonna move regardless of engine mounts new or old
@BigDog50001
4 жыл бұрын
A broken engine mount is not the only thing that can cause front end noise on these Civics. On this vehicle, the mount was broken (and clunking) and I proved it on this video. It was replaced which stopped the movement (it will still move a slight amount but not like in this video) and I showed that on the replacement video. Thanks for stopping by.
@tb2324
2 жыл бұрын
When you put in park (no load), your engine still moved. Not as much but it did.
@MediaEdits2701
8 ай бұрын
brother what is that Plastic piece by the Logo but above it!!??? Its rattling around because they didnt tighten the bolts ! help
@bronniesboy
6 ай бұрын
How can check this on a manual. I think i might be into something with your video
@lightworrior4401
4 жыл бұрын
Good video my friend. God bless you
@BigDog50001
4 жыл бұрын
Thank you for the comment!
@michaely7644
3 ай бұрын
Is the noise you are describing pretty loud? I have a loud clunking noise coming from the front of an 2009 honda civic and almost sounds suspensionl like. Wondering if that is what you are referencing here?
@mcdougal0
4 жыл бұрын
Nice informative video.
@BigDog50001
4 жыл бұрын
Thanks for the comment!
@BADD400
5 жыл бұрын
Film the repair and tools too that were on the workbench
@BigDog50001
5 жыл бұрын
lol thanks for the input!
@spiritseeker1932
2 жыл бұрын
My 2007 Honda CR-V will make a thud after I back up and put on the breaks. Any suggestions? Can’t find one video on this. 😏
@J_Dukes
3 жыл бұрын
My sound is more or a slight crunch of cracking noise when I shift into first and sometimes 2nd or 3rd seems to happen when its getting torque any ideas what might be?it still runs good just worried may get worse and become a problem.
@ladyanntheog
4 ай бұрын
Same problem on my 08 si. Get weird looks when I describe the sound as crunchy. Glad you said it too. Hope I figure this issue out soon.
@ilijakaurin401
2 жыл бұрын
Great work
@BigDog50001
2 жыл бұрын
Thanks 👍!
@hassantariq8847
3 жыл бұрын
I have Honda Civic 2012 hybrid , I changed the mounts but still there is rattling in dashboard. But nothing on idle but when I’m at 10-20kph it makes the noise but after that it’s all good. I’m just curious what’s up!
@heather577
2 жыл бұрын
Any ideas on a clunk in a 2010 Pilot when weight shifts (stopped then going forward and weight shifts to rear) in front driver side, feels like under pedals.... replaced cv joint, & shocks
@brandileinaala1069
3 жыл бұрын
I have a 99 civic and it makes a knocking/slightly thumping sound.. I don’t know anything about it but sounds like it’s coming from the tires ?
@jaspreetsingh-iw4tm
3 жыл бұрын
i have honda civic 2007 every time when i start the car in the morning and shift into D it creates little noise when car is in 1st and 2nd gear .whats the problem
@user-om8hz4mp4u
4 жыл бұрын
this civic is bulletproof, i have one. never seen a mechanic.
@BigDog50001
4 жыл бұрын
They are good cars.
@robscrapolla
4 жыл бұрын
Can this occur on the drivers side as well?
@milanodiallo4476
2 жыл бұрын
How about the problem where you press the gas in the rain and it takes minute to move the car and you hear a loud grinding sound, is it the same ?
@Longtrailside
5 жыл бұрын
I dont see a problem, your just buying tools to get the problem fixed... :)
@BigDog50001
5 жыл бұрын
True!!
@daviderhahon
3 жыл бұрын
I don't see a coffee problem either. His only problem may be working too much... 😁 Jokes aside, you can never have enough tools. Each tool is unique in a way.
@jessevillalobos9673
4 жыл бұрын
Awesome video. You have my like and subscription sir.
@BigDog50001
4 жыл бұрын
I appreciate the comment, thank you and welcome!
@jesuszuniga1257
Жыл бұрын
Hi I have a 2012 civic lx sedan with a clunking noise and honda technician verified it was the passenger side mount that another Honda dealership install (aftermarket) because oem is backorder. The engine doesn't move when I shift to reverse or drive. Is it safe to drive with the clunking noise. Was told at the dealership that I can
@fakhriruhaifi
4 жыл бұрын
It is same problem happen to me. I already change with new mounting and no more clunking
@BigDog50001
4 жыл бұрын
👍
@mbs5328
5 жыл бұрын
Yes, please make a video of the repair.
@BigDog50001
5 жыл бұрын
Thanks for the input!
@user-lp5tx2mx5n
Жыл бұрын
Yes please
@jak8497
3 жыл бұрын
The clunk sound after you shift from D3 to D at 2:20 . Is it a motor mount related problem?
@spacecy
3 жыл бұрын
No, you don't have a tool problem :D great video.
@BigDog50001
3 жыл бұрын
lol, good to know!
@odeyfred9313
2 жыл бұрын
I’m having the same sound on idle on my es350
@UrFavDudeOnUtube
4 жыл бұрын
I can’t say I have heard any noise like that, but now I’m itching to go do this test 😶
@GoganTibor
3 жыл бұрын
Me neither
@RampartPh
Жыл бұрын
is there a transmission mount in the engine bay too? the one on the driver's side?
@herro2015
5 жыл бұрын
Thnks
@BigDog50001
5 жыл бұрын
Thanks for the comment.
@joesno406
5 жыл бұрын
Great VID!!! So under load you mean "you had A/C on and lights on when you torqued engine? I guess nothing running when you do this test?
@BigDog50001
5 жыл бұрын
No I don't think I had any of that stuff on, I just meant put a load on the engine by putting it in gear. Thanks for the comment!
@joesno406
5 жыл бұрын
@@BigDog50001 Oh my bad lol ..I really like your vids MAINLY because you give torque specs and that is very important for beginners for safety reasons of course. And is what seperates you from all the rest on Youube THANKS SO MUCH!!!
@williammizebee
Жыл бұрын
To service its not convenient location
@thewillofme
5 жыл бұрын
Do you have anymore videos on a Honda Accord LX V6..? I have a SRS and TSC Error. P0401 (Exhaust Gas Recirculation Flow Insufficient Detected) and P1457 (Evaporative Emission Control System Leak Detected - B)
@BigDog50001
5 жыл бұрын
I have a few V6 videos. SRS and TCS will need a good scan tool to start with codes. I filmed this Honda Idle Learn video right after I fixed a P0401, it is usually a plugged EGR line on those V6s (I showed a picture of it): kzitem.info/news/bejne/xINov2mAcpxlfII. Here is a diagnosis of a P1457 on a V6: kzitem.info/news/bejne/wppu4KqLemNhopw.
@atrem7942
3 жыл бұрын
I have the Ishift version it has different mounts it is the fk2 model. Also I have replaced the engine mount stil have a clunking sound on bumbs? Anyone have experienced the same problem?
@michaelsawyers1002
4 жыл бұрын
yes,you have a tool problem! i have it too!
@BigDog50001
4 жыл бұрын
lol!
@wizardng
Жыл бұрын
How much does it cost to fix this at the shop
@Chance_212
4 жыл бұрын
Mine clunks under the shifter. Is there a tyranny mount? Or just engine torque strut?
@ciensuk
4 жыл бұрын
Thanks for this vidz, new idea to me
@myalt1204
3 жыл бұрын
thank you
@BigDog50001
3 жыл бұрын
👍
@sharmarkesharmarke5339
3 жыл бұрын
Good job brother
@BigDog50001
3 жыл бұрын
Thanks!
@Imissthefuhrer
4 жыл бұрын
So how do you do this test with a manual? Without burning through my clutch? I’m assuming neutral won’t do it.
@BigDog50001
4 жыл бұрын
Many times a visual inspection of the mount can be done, looking for cracks and the mount to be smashed down enough for metal to metal contact.
Пікірлер: 303