Thanks I dont know what i would of done if you had not blessed me with this sacred video. This does in fact bring a smile to my face.
@ja4757
3 жыл бұрын
Thank you very much dude. I have 36 to do for a go cart track. Keep it up .
@andrewgiron348
Жыл бұрын
i have the same exact set up i just can’t find the pull let that goes on the shaft can some one out there please point me in the right direction on we’re to buy it or what it’s called?
@crash1179
2 ай бұрын
What gearing are you using final drive ?
@TR1CKSHOTS31
2 жыл бұрын
I have a gx270 for a Gokart but I’m having trouble starting it. But when it does start it starts to shoot white smoke through the little tiny hole in the fuller cap, and it shows that it has oil. Any thoughts what it can be? Luckily I found this video.
@me-ev3kz
Жыл бұрын
Do you know the 'in put shaft' diameter it fits, and the 'out put' shaft diameter? Will engine case mounting holes match the Preditor 212 cc engine case?
@user-ou6zs2tv4k
4 ай бұрын
What oil do you put in it?
@jamesbubnick
3 жыл бұрын
Have you seen the clutch disks disform? I picked up an old Honda G300 for 20 bucks, got the motor working and when I reassembled the wet clutch I had issues. It wasn't acting as a clutch and when I disassembled it one of the clutch plates went from straight to bowed out. I'm assuming the clutch material serrated from the metal but not exactly sure .....Thanks.
@westsguitar4046
Жыл бұрын
I am wondering the exact same thing as I just discovered one of the friction disks having one side grip and the other straight metal. Thinking the same as I didn't see my dual sided disk in this video.
@jonny_exotic2575
Жыл бұрын
Great video
@andrewgiron348
Жыл бұрын
what kind of pulleys or clutches are you guys putting on these gx270
@Fiatfan
Жыл бұрын
This all you used is in box when you buy it?
@DickyWoollard1
Жыл бұрын
Thank you!
@darrenvalensolo4088
7 ай бұрын
Great video I have a gx270 and I took the governor out of it and when I put it all back together it seems that the clutch is always engaged because as soon as I start it the wheels spin even at idle? I disconnect the throttle cable and almost held the carburetor closed to see if it was an RPM issue and it doesn’t seem to be the case. Any questions or answers would be awesome thanks
@davidszabototh
3 ай бұрын
Did you start it with the wheels off the ground? Because it's normal in that case.
@wippitywine2
2 жыл бұрын
what kind of oil do i put in the gear box
@makesomethinghappenmsh2274
2 жыл бұрын
10w30
@devonfretwell3351
3 жыл бұрын
What is this used for? Is it like a clutch on a dirt bike?
@sumanmondalsuman7635
2 жыл бұрын
very very Good working 🌹🌹🌹👍👍👍
@dominicminasi3213
3 жыл бұрын
Thanks that was helpful..
@jasam7118
3 жыл бұрын
Thickness of the plates?
@brandonparsons7321
2 жыл бұрын
Iam replacing the clutches in mine, should I soak them in oil prior to installing ?
@chrisheath7500
Жыл бұрын
Where did you get the clutches? Yes soak them in new oil for a few hours.
@kokkiligaddadurga7485
2 жыл бұрын
clutch model name plz help me
@aarondlc8544
3 жыл бұрын
Song?
@Loneeeey
4 жыл бұрын
How much oil should you use? Should it be full of oil?
@makesomethinghappenmsh2274
4 жыл бұрын
It should be about the same level as the shaft on the side.
@jeanswithtee
3 жыл бұрын
What type of oil is used for these? I can't find that info anywhere!
@makesomethinghappenmsh2274
3 жыл бұрын
10w30.
@stefanolesen8307
3 жыл бұрын
What type of Oil do you use to the transmission ?
@makesomethinghappenmsh2274
3 жыл бұрын
10 W 30 Motor oil.
@mountfields
4 жыл бұрын
Is the clutch “bite” adjustable ??
@makesomethinghappenmsh2274
4 жыл бұрын
There is not really any adjustment to these. Is your clutch slipping?
@mountfields
4 жыл бұрын
Make Something Happen MSH . Prob’ is, the clutch is biting on slow tick over,
@TimeTwiddler
3 жыл бұрын
what's the gearing for this gearbox?
@makesomethinghappenmsh2274
3 жыл бұрын
2:1
@TimeTwiddler
3 жыл бұрын
@@makesomethinghappenmsh2274 so like 12 teeth to 24 teeth or something like that?
Пікірлер: 39