Great content for people who want to learn more about racing , keep up the great work!
@TurboJohnRacing
4 жыл бұрын
Thanks
@WeldonAutomotive
4 жыл бұрын
Awesome review I’m literally on the fence of the same decision but going from a ET pro to a stiff wall slick and I saw these and thought it would be a good tire that meets in the middle can’t wait to see the next video for more results
@stevewelborn8744
4 жыл бұрын
Thank you for giving use a very inside look at what you are doing.
@twomontess
4 жыл бұрын
I run MT pros. 17psi. Love them. I’d love to hear your long term reviews.
@RustyWells2
4 жыл бұрын
Yep that's the ones you want John I think you're going to be happy with those slicks! 🦅🇺🇸🦅
@jcnpresser
4 жыл бұрын
Can’t wait for this no prep action. Good luck.
@TurboJohnRacing
4 жыл бұрын
Thanks
@FORCFED
5 ай бұрын
Hey John , do you remember if you did a burn out ?? Some people are saying if you do a burn out they will spin ??? Thanks sir .
@joracer1
2 жыл бұрын
Best way to test run both same time, if car launches left the right tire is better. Done this many many times while tire testing in rc cars.
@AntonioClaudioMichael
4 жыл бұрын
Very informative video John
@jorgeclarkgutierrez1190
5 ай бұрын
Thanks for information Master, im rookie in this, im try to fin tires for s10 3500 lbs 500 whp do you recomend 28 x 9 or 28 x 10.5 is for little prep track.
@TurboJohnRacing
5 ай бұрын
10.5 for sure if they fit!
@NollEngineeringPerformance
4 жыл бұрын
This is awesome information and a great video!!
@TurboJohnRacing
4 жыл бұрын
Thanks
@mod_motor_mafia336
4 жыл бұрын
Looks like a slick disguised as a drag radial... or maybe a stiff wall slick
@AndreS_-df2nw
Жыл бұрын
I know you guys run beadlocks, but I want to ask if you have recommendations for mounting slicks on std wheels without rims screws to prevent the tire from slowly moving on the wheel. I'm a bracket guy running about a 1.6 60'
@JayDee-bz2ge
3 жыл бұрын
I wonder if the HOOSIER allows the same "squat" with more overall pressure ? I know HOOSIER is used in racing where MT is more non pro weekend racers....
@cmsracing
4 жыл бұрын
You might want to try going down in pressure too, I run 6 1/2 psi in mine!
@TurboJohnRacing
4 жыл бұрын
These smaller tires cannot go that low. I’m debating going down to 12 this weekend
@RealSteelStreet
2 жыл бұрын
You’re never supposed to run below 12-14 psi in ANY of the radial designed tires! Even a bias slick should stay between 8-12 psi for a 28X10.5/275/60 or smaller👌🏼 6.5 psi would make for a dancing fool 😳
@richardkinnison5987
4 жыл бұрын
No prep which do you prefer?
@RyanSammutRacing
3 жыл бұрын
Hi John, need your opinion, love the channel! On a marginal track, do you suggest radial pro 315 or 29.5x10.5 PBR? I can either or. Prep is getting better up here in Canada but no radial prep whatsoever. I have used 28 PBR with great success. Wondering if 315 pro is wide enough to compensate marginal prep or just go 29.5 PBR.Thanks
@TurboJohnRacing
3 жыл бұрын
I have never used either! But I would think the PBR would be better.
@Dfour
4 жыл бұрын
great comparison
@RustyWells2
4 жыл бұрын
I have a feeling it's going to be a while before we see the M/T back on the Fox! 🦅🇺🇸🦅
@thgilne5060
Жыл бұрын
Did you make another video on these tires? I'm getting ready to buy one or the other.
@loudmikemedia
4 жыл бұрын
yup
@sammieanthony1883
2 жыл бұрын
I know this is an old video but was wondering how u think the 28x9 pro bracket radial would do on a 10" wheel
@todds5956
2 жыл бұрын
Do drag radials slip on the rim if you don’t have bead locks?
@eb972
4 жыл бұрын
I use the same scale in my shop to weigh nitrous bottles.
@jtank4115
2 жыл бұрын
Hey, what is the tread life of the MT PBR compared to the Hoosier BR?
@jamieknight9636
3 жыл бұрын
So whats been your outcome, which tyre are you going to now mate?
@sheltonswimmer4142
2 жыл бұрын
Any running these type Hoosier on 14” wide wheel?
@stuartgriffin5.7
2 жыл бұрын
Still like the Hoosier better? Currently have them on my low 11 second vehicle cutting low 1.5 60'? What's better with a well prepped track?
@TurboJohnRacing
2 жыл бұрын
I have not had the hoosier bracket radial again but may grab some this year
@stuartgriffin5.7
2 жыл бұрын
@@TurboJohnRacing look forward to seeing it. Good luck! In the prime DA right now for my NA truck, I save the summers from abuse.
@angelofalzone4664
3 жыл бұрын
Looking to switch over from a bias ply slick to radials . Ton of info out there but liked your video on the Hoosier radial. Do you still run them or have you put the M/T back on? I’ve got a 85 fox body with Hoosier stiff wall slick 32-14.5W -15. Got the car with this setup, but time to buy new shoes....can you help out?
@TurboJohnRacing
3 жыл бұрын
I’m now on slicks. Hoosier was ok for limited prep but I was more consistent with the mt pro bracket radial. MT was faster as well on my car
@angelofalzone4664
3 жыл бұрын
@@TurboJohnRacing so you are not using radials....just bias ply slicks? I’m not sure what to do, been out of racing many years and buddies suggested go radials but why, I ask myself. I’m really out there to bracket race, don’t care if lm the fastest or not... so I think staying on slicks then might just be better for now and save money on modifying rear suspension
@angelofalzone4664
3 жыл бұрын
@@TurboJohnRacing I appreciate your videos John. You are a good man taking time to respond. You helped out my good friends’ brother out at the track some time ago...saw the video. Mario’s brother is John Viola, that crazy Pro charged Comet with the stick... God Bless you Hopefully get to meet you one day. If I knew how to send a pic of my car, I would but I don’t know how on here
@jaywalker6928
4 жыл бұрын
sidewall are tuff cause there made for turning slicks just plan grip an rip
@raypingley5733
4 жыл бұрын
Do you have a radial tires on the front? If so with that softer side wall on the rear it may cause the car to walk because it more like a slick tire
@TurboJohnRacing
4 жыл бұрын
Just the regular m/t front runners
@omaralvarez7746
3 жыл бұрын
Brother the rims are fantastic i will love to buy some rims like that i have a dodge charger scat pack i will run in the 1/8mile with the husier s
@alsharshani
3 жыл бұрын
How many runs do you think M/T bracket tires will take on average ?
@TurboJohnRacing
3 жыл бұрын
All season, they last forever
@davidmoore6050
4 жыл бұрын
hey john always enjoy you videos . I run a 28X10.5 no mini tub stock suspension class I use a 10inch wide weld wheel 61/2 inch back space with a MT 28 10.5 and its close LOL was wondering if the Hoosier Bracket radial was the about the same size width as the MT 28 10.5 Thanks
@TurboJohnRacing
4 жыл бұрын
You should be good, mine is non mini tubbed, but I had to really hammer the inner fender wells
@davidmoore6050
4 жыл бұрын
@@TurboJohnRacing me too lol thanks some friends of mine are saying 28 10.5 radials is a 1/2 inch fatter than my 28 10.5 slick
@TurboJohnRacing
4 жыл бұрын
Mine fit, but it’s very close. I have had slicks on it a few years ago.
@mathiasforslind3941
4 жыл бұрын
Hallo both tires are radials but with the hoosier u going to have only 120antisquat but with M/t 170? why?
@TurboJohnRacing
4 жыл бұрын
Sidewall is much softer on the Hoosier, 170 would crush the tire too much!
@mathiasforslind3941
4 жыл бұрын
@@TurboJohnRacing ok i have ordered drag bracket radials 29,5/10,5r15 for my chevelle 3700 lbs BBC 598 n/a 953hp 808lbft pg 4,10 trz arm arb Afco d/a front and rear ,i hope they will work good
@alj2264
4 жыл бұрын
Who did the beadlock conversion for you???? Please forward the contact information OK BUD👍👍
@TurboJohnRacing
4 жыл бұрын
MacFab here in NC. They do great work!
@puunersjabski6487
4 жыл бұрын
Who did your beadlocks on your centerlines
@TurboJohnRacing
4 жыл бұрын
MacFab did them. These are billet specialties.
@ysitrim88
4 жыл бұрын
i run the MT pro bracket radial @ 17.5 to 18 psi and never had any tire shake. my 60' times are between 1.23 to 1.28. i wonder if you are not running enough tire pressure with the MT pro bracket radial? I've heard if you run to low of air pressure it can cause tire shake. My car only runs 5.25 @ 136 mph 1/8 making 1100 to the tires. i know you are making alot more power than me. Also a mustang.
@TurboJohnRacing
4 жыл бұрын
I have tried higher pressure, they kick the tires easier on the limited prepped tracks. But no shake! Just cannot get down the track as consistent
@andrewmazzetti6926
2 жыл бұрын
Why do you not like slicks?
@toddmaggard9259
4 жыл бұрын
Best tire for a 2800# 500hp coyote swap fox with a fp tko 600?
@TurboJohnRacing
4 жыл бұрын
I have not ran a clutch car in a long time, I don’t know what would be best in that situation.
@kevinanderson4421
4 жыл бұрын
What is the back space on your wheel
@TurboJohnRacing
4 жыл бұрын
6.5
@keysautorepair6038
4 жыл бұрын
Hey John are them weld rims .
@TurboJohnRacing
4 жыл бұрын
Billet specialties
@NickelWhiteS550
4 жыл бұрын
Is this tire better than a M/T ET Drag stiff wall?
@TurboJohnRacing
4 жыл бұрын
It seems to be a little better for me, but I don't like super soft sidewalls.
@NickelWhiteS550
4 жыл бұрын
Turbo John has tour 60ft got better by going to these Hoosier?
@trentonnapa518
4 жыл бұрын
what size is those rims, thanks john
@TurboJohnRacing
4 жыл бұрын
15x10’s with 6.5” backspacing
@RustyWells2
4 жыл бұрын
The thing about the slicks is if you do get tire shake just drive right though it and it will stop you can't do that on the MT they want stop they will just get worse until your damn teeth fall out! Who ever you talking to and he told you about the slicks he's a good man that's not a bullshitter I would keep his number in my phone if I was you especially if you're going after no prep this year! 🦅🇺🇸🦅
@kevinnewman8039
4 жыл бұрын
Why compare a new tire to old one not acceptable especially when you are comparing the weight
@treyivey5431
4 жыл бұрын
You'll need a lil more air pressure in that Hoosier.. 17 to 18 pounds
@1SLOWCAT
4 жыл бұрын
Fayetteville track?
@TurboJohnRacing
4 жыл бұрын
We race Fayetteville all the time, love the track!
@johndishman8893
6 ай бұрын
If you ever sell those wheels please hit me up
@321-Gone
4 жыл бұрын
Do date codes matter to you?
@TurboJohnRacing
4 жыл бұрын
I look at them, but as long as they are kept in decent storage I have not seen issues. So the codes don’t matter a ton to me. I may be missing this part though, hmmm
@321-Gone
4 жыл бұрын
@@TurboJohnRacing Right on. Thanks John. Good luck at NP race.
@chriscrossapplethots
4 жыл бұрын
Teen eeench reem
@johnhartman5507
4 жыл бұрын
Hey John. Have you come to a verdict on which tire is better? Also, which is more forgiving? Thanks!
@TurboJohnRacing
4 жыл бұрын
I have not, but the hoosier worked great early true no prep. I cannot get it to work on sticky tracks
@johnhartman5507
4 жыл бұрын
Thank you
@kylevantassel7259
4 жыл бұрын
Part of the reason those tires are acting like they are is that the car needs a little anti squat. I dont see any . When there is no anti squat or the car isnt hitting the rear suspension hard enough the tire will wad up at the front of the tire . You push that tire down into the racing surface a bit more and that will change.
@TurboJohnRacing
4 жыл бұрын
The calculator shows 170 percent on the M/T’s, and 120 something on the Hoosiers
Пікірлер: 88