It’s people like you who make the world a better place…a million thanks!!!!
@RussW.
2 ай бұрын
Happy to help, thank you for the kind words.
@tinakeogh9916
8 күн бұрын
Fixed my problem! THANK YOU!
@RussW.
8 күн бұрын
@@tinakeogh9916 Awesome! Thx for watching and I'm glad it worked for you
@trainsplanesandotherthings5187
8 ай бұрын
OMG... Thank you .. I've been using the small brush to clean my carpet because the large brush stopped turning... Now fixed thanks to your video !
@sherryhowell8697
5 ай бұрын
me too lol
@twiceadopted7147
4 ай бұрын
God bless you sir. Bought an older model new in 2021 and spin scrub brush quit working today. Saved me money on a new motor or machine.
@RussW.
4 ай бұрын
Really happy this fix worked for you! Thx for the feedback, cheers 🍻
@99truthisstillalie82
Ай бұрын
Yo people like you who posts such helpful and money saving tips like this should put a way for people like me to tip you. Cuz I was gonna buy and new Hoover and you sir kept me from wasting money and indirectly helping the planet by keeping this plastic vacuum out of the dumps for hopefully a couple more years.
@RussW.
Ай бұрын
Very nice of you to take your time to post a wonderfully kind comment, I very much appreciate it and I'm happy to help others where I can.
@Alexj200
Ай бұрын
This worker for me but I did have to put a little more muscle into it than I was anticipating from the video. Thanks!!
@RussW.
Ай бұрын
@Alexj200 glad you got it working! Thx for watching.
@eggyernestopavia4349
2 ай бұрын
thank so much for the tip, sir. this fixed it for me.
@RussW.
2 ай бұрын
Awesome! Thx for the message.
@ramos6784
Ай бұрын
For those that don't have an allen key or hex socket, I used a flat head screwdriver.
@fotrtisrn2014
4 ай бұрын
Thank you so much! It's working again! Definitely thumbs up and follow!!
@RussW.
3 ай бұрын
Glad it worked for you, Cheers!
@Bons_Eye
10 ай бұрын
That's a good quick fix! I believe the bearings, as there's two of them, will eventually just seize up on ya. Looking for how to clean out build up from the soap in the hoses on mine and came across "Handcrafted Overlanding" KZitem channel where he took his apart to grease. I've saved that one for later as I'm sure that will be my next need to fix on my machine. My machines handle broke after 2 uses. Fixed it with duct tape. :)
@terrystokes7047
6 ай бұрын
Thank you; helped me out with a similar VAX machine 👌👍👋
@RussW.
6 ай бұрын
Awesome! You are very welcome!
@ritzidean8511
Ай бұрын
This worked like a charm. However, some feedback - it was very difficult to find an allen wrench that fit in the hole. I bought a slightly too small allen wrench (metric) and used a flathead screw driver to wedge it in. Also, it was not easy at all to turn the allen wrench, it took considerable force.
@KingsKid2020
Ай бұрын
And it didn't take you 20 minutes to tell us😊 Many thanks!
@RussW.
Ай бұрын
Lol, I prefer getting right to the point. Thx for watching!
@daniellerodriguez3354
3 ай бұрын
Thank you
@statictech7
5 ай бұрын
Thank you!!!
@jrbensen
5 ай бұрын
I didn’t have the correct Allen wrench so I removed the center brush and was able to break mine loose with the male plastic piece that goes into the vac with a 8mm socket. It’s working now for me after breaking free. Thank you!
@montc38
3 ай бұрын
Thanks
@almagandara1860
Ай бұрын
I have the exact cleaner, but not picking up the dirty water. Any help would be greatly appreciated.
@RussW.
Ай бұрын
These units need wet carpet to work properly. If carpet is not saturated enough, they won't pull the water back out again. Maybe go back/forth a little slower, concentrate on spot cleaning vs trying to do too much area at one time and squeeze the water trigger using the rinse cycle. Hopefully that helps.
@Tiffanylnet
2 ай бұрын
What size Alan wrench does it takes please, Thank You‽
@RussW.
2 ай бұрын
If I remember correctly, it was an 8mm.
@cindyphilpot7456
5 ай бұрын
Not a quick fix for me when I tried turning the Allen wrench it made a clicking sound as it turned not fat though then it stopped & locked in place. Not moving at all now. What's the next step in trying to fix the problem?!? Can you help me? 😟 cleaning the filter didn't help either.
@RussW.
5 ай бұрын
Mine did that at first, sounded like a gear slipped or something. But eventually began to move again. If yours is locked in place, it may be beyond this repair, I'm sorry to say.
@CarolHeineman-ys1tt
5 ай бұрын
I think the belt needs replacing cuz of a burning smell and lots of noise. Can't figure out how to access it and can't find replacement belts online. Any help would be appreciated.
@RussW.
5 ай бұрын
As far as I know, this is a turbine driven system. Like a turbo on a diesel engine. It does not have a belt, but rather a fan blade that provides the power to drive the gears for your brushes to spin. Your model may be different than mine? My best advice is to seek professional assistance or maybe time to upgrade your machine. Unfortunately, they just don't make em like they used to!
@queennine
8 ай бұрын
Mine stopped spray the detergent. Ever come across that issue? it sprays water fine. I'm hoping just an air bubble in the line. Read to prime the pump, but no where does it say do this with liquid in the unit or not lol
@RussW.
8 ай бұрын
Maybe run a little warm water through it? That's what I do so the soap doesn't solidify in the lines.
@queennine
8 ай бұрын
I did find a couple of vids about holding the trigger for up to a minute with the handle down with solution in the unit, so we'll see! thx for the reply back. @@RussW.
@USMCdad470
22 күн бұрын
I did this and still not turning. Any suggestions? Machine has only been used three times.
@RussW.
22 күн бұрын
@USMCdad470 do the brushes spin freely? This unit works off a vacuum, so it does need water on the carpet to create a good suction and get things moving. I have found more water, the better.
Пікірлер: 43