I remember when i was younger, i use to have one of those, damn i remember getting alligator clips and buttons from radio shack and sears, and using wires from broken earphones, putting all of them together and just keep pressing the buttons until the battery died, those were fun times for me lol.
@lowlowsandclothes9923
3 жыл бұрын
Hell yeah homie 💯💪🏽
@Monkeycrazy-zz2es
3 жыл бұрын
You should do lift and spinning bed dancer tutorial
@lowlowsandclothes9923
3 жыл бұрын
I got one coming soon
@dereed5991
3 жыл бұрын
Great explanation. Didn’t relieve how easy it was. I’m new to the lowrider model culture & curious, when u say “sutter” (I think)(@ 2:22, 3:18, 3:45) what’s does that mean. What does that consist of? Just folding the wires to what it’s connected to?
@dereed5991
3 жыл бұрын
Okay after research I meant “solder”. Using a solder gun. Is it mandatory & the only way to connect the wires is by using one?
@lowlowsandclothes9923
3 жыл бұрын
Not at all, although it’s the best and the strongest way, with the wires being zip tied in place theirs no need for a strong hold. You can just put the end of the wire in the holes all of the motors and switches have and just twist them together, I actually did that on the first review I did because it’s faster but you shouldn’t have any problems if you don’t have a soldering gun
@dereed5991
3 жыл бұрын
@@lowlowsandclothes9923 okay thank you!!! Keep up the hard work & continue blessing us with updates. I’ll update you as I go along my journey
@ezekielenriquez1312
3 жыл бұрын
You should do a pro dancer hoppin hydros tutorials
@lowlowsandclothes9923
3 жыл бұрын
It should probably happen in the future, stay tuned!
@roberthatch6426
3 жыл бұрын
I agree
@tiborisestafford5478
3 жыл бұрын
@@lowlowsandclothes9923 I’m looking forward to it. I got a nice collection of homie hoppers and I’m building some models now! I buy all my wheels tires and accessories from hoppin hydros and Pegasus. I love your videos bro! Keep em coming so I can get some more ideas!👍👍👍😎😎😎
@lowlowsandclothes9923
3 жыл бұрын
Thanks bro I appreciate it, I’m actually thinking of making a video on how to customize a chassis to do something else than just hop 🤫
@ezekielenriquez1312
3 жыл бұрын
@@lowlowsandclothes9923 dannnggg man im working on a dancer but i dont have money to buy soldering iorn metal
@kmart014
3 жыл бұрын
Can i use one of these and keep the interior in the car? On a 64?
@toxicdizzy8300
3 жыл бұрын
I’m still confused on how you connect the wires to the switch box
@lowlowsandclothes9923
3 жыл бұрын
Do you have an Instagram?
@avarz2889
Жыл бұрын
To get a body for it, I gotta buy a 1/25 scale model kit correct?
@lowlowsandclothes9923
Жыл бұрын
Yes, 1/25 or 1/24
@avarz2889
Жыл бұрын
@@lowlowsandclothes9923 is there a way to buy a body pre painted
@lowlowsandclothes9923
Жыл бұрын
@@avarz2889 not really, although you might be able to find some on eBay
@avarz2889
Жыл бұрын
@@lowlowsandclothes9923 oh ok thanks
@boomerang-memories
2 жыл бұрын
Where do you put the battery
@lowlowsandclothes9923
2 жыл бұрын
It goes with the switch box
@pavman692
3 жыл бұрын
when u going to do the pro dancer 3 wheel kit
@lowlowsandclothes9923
3 жыл бұрын
Not sure I’ll look into it soon
@pavman692
3 жыл бұрын
@@lowlowsandclothes9923 ight thanks cuz i recently got it and it’s kinda confusing
@bernardocastillo5977
3 жыл бұрын
Where can I buy a kit
@lowlowsandclothes9923
3 жыл бұрын
Website link is in the video description
@sergioorozco3815
3 жыл бұрын
This is almost how I use to lift my models back 1980, except I used 4 motors, one for each corner
@tylerwilliams33
Жыл бұрын
That's crazy I had no idea this went back that long
@sergioorozco3815
Жыл бұрын
Back when I started lifting models, the only method was using Bobby pins for bouncing, I didn't like it so I put my 12 yr old brain to work and invented and pioneered the style we all see now, so yes to the best of my knowledge I modernized and basically made it possible for others to fly with there imaginations
@Looneyboy805
2 жыл бұрын
Where did you bought the Chevy Impala body?
@lowlowsandclothes9923
2 жыл бұрын
Ebay
@BasicallyEverythingy
6 ай бұрын
Do we need to solder it or can I just use super glue?
@jayypeezy36
4 ай бұрын
Did u ever figure urs out bro this shit kinda confusing been trying to get it goin for my son...please lmk
@nickhavens797
2 жыл бұрын
did help me to much would have been better if u gave more details
@lowlowsandclothes9923
2 жыл бұрын
Instructions show the wiring diagram, I’m just showing how it goes together
@adrianv8632
3 жыл бұрын
Nice I used to build these from scratch back in the 90s with my brother Im planning on building a few again. The motors and wires we found in old rc cars walkmans and old radio's also I used a power cord from my Nintendo to power it intended of battery when I was home. I might grab a kit and some ds from there.
@lowlowsandclothes9923
3 жыл бұрын
That’s dope homie! I used to make them from scratch also but these just work so much smoother
@adrianv8632
3 жыл бұрын
Yup, from the video it looks like it runs pretty smooth the ones we used to make kind of used to snag and won't drop off all the way sometimes but was still fun when I was a kid. I will grab a few of these kits now that they have the 10% off on them thanks for the video bro ill keep an eye out for the next one.
@deangelos1980
2 ай бұрын
that's exactly how we use to make our kits accept we did it ourselves use wire clothes hangers for the u bolts to get all you need is wire cutters and fishing line and the motors we use to get from radio shack those and the switches and batteries
@anthonyalvarenga9465
2 жыл бұрын
Can I use any other battery or does it have to be rc car batteries?
@lowlowsandclothes9923
2 жыл бұрын
Just anything that’s strong enough, I think if you connected a few like 9 volts together it would work but it would have to be like 3 or 4
@josetrujillo6081
Жыл бұрын
I bought one today but my string keeps ripping any idea what I’m doin wrong
@josetrujillo6081
Жыл бұрын
It goes up but won’t come back down on its own
@lowlowsandclothes9923
Жыл бұрын
The stings break after a little while, try doubling up on the string, also mess with the slack in the string to get it to stop sticking up
@Looneyboy805
2 жыл бұрын
Well I don't get it because where does the alligator clip goes and I don't know how where did you get another wire to connet to the switch box
@lowlowsandclothes9923
2 жыл бұрын
You cute the wires into diffrent sizes and the aligátor clips go to a battery
@jayypeezy36
4 ай бұрын
Did u ever figure out bro im stuck on that part right now man?
@billyevergreen737
2 жыл бұрын
You wanna sale it
@WeezyFpjs
4 ай бұрын
I got a few (cough cough )
@Thatboiishawn24
2 жыл бұрын
Can I ship you my kit and pay you to install it
@osk.puro.1775
2 жыл бұрын
should i use a model kit for the body or already built car?
@lowlowsandclothes9923
2 жыл бұрын
Model kit
@TuckedTv
3 жыл бұрын
🔥🔥🔥🔥
@boomerang-memories
2 жыл бұрын
How do you solder it?
@lowlowsandclothes9923
2 жыл бұрын
Lookup a video on how to solder
@boomerang-memories
2 жыл бұрын
@@lowlowsandclothes9923 thanks bro
@Mref117
3 жыл бұрын
Currently working on this build. My motors work and everything seems fine up until I string them. Are they too weak? I am using a 9 volt battery.
@lowlowsandclothes9923
3 жыл бұрын
Battery won’t work, try a rc car battery
@Triggaramirez
3 жыл бұрын
Just ordered this kit! Dope video very helpful
@lowlowsandclothes9923
3 жыл бұрын
Thanks! Glad it helped!
@pntvgs9684
3 жыл бұрын
My string keeps ripping like after 3 hops. Where the tiny shaft and the motor connect. Any ideas ?
@lowlowsandclothes9923
3 жыл бұрын
The first tip is to use a small metal grommet in the hole, the second is to use a double string dm me if you need more help @los_traviesos_sac
@dragin79
2 жыл бұрын
Just received my kit and there are two black plastic grommets that look similar to the motor shaft gears. Just want to see what these are used for. Is there anywhere to send a picture of these to to find out for sure what they are for?
@lowlowsandclothes9923
2 жыл бұрын
They go where the string rides to prevent catching, you may have to enlarge the hole to get it to fit though
@studio619_
3 жыл бұрын
Thanks for this new video. I learned something new ill try tomorrow! Keep up the good work
@lowlowsandclothes9923
3 жыл бұрын
Thank you I appreciate the comment🙏🏽!
@danielcampisi4867
Жыл бұрын
This is my first time trying one of these out and I was with you all the way up till 3:40 then you lost me....what wires get connected to the switches?? After you connect the alligators where do those go?? I thought I had it but only one motor spun.
@lowlowsandclothes9923
Жыл бұрын
I would get the instructions it comes with and color each polarity of wire a different color. It helps with not getting them mixed up
@jayypeezy36
4 ай бұрын
Did u ever figure out bro im stuck on that part too man???
@jbrock541111
3 жыл бұрын
Nice vid! I just finished building my hopper chassis, but the motors wont go down without manual assistance. They go up, but won't go back down. Any thoughts on how to remedy? Thanks!
@lowlowsandclothes9923
3 жыл бұрын
More than likely it’s the battery, hoppin hydros has some batterys for sale on their website, rc car batterys work too
@lowlowsandclothes9923
3 жыл бұрын
It can also be your string is too long, shorten it as much as possible and use the string included, I’ve seen a lot of people use fishing line and have the same problom too
@mravila2537
3 жыл бұрын
Does the back of the switch plate go in a certain order or is it just positive and negative on any side?
@lowlowsandclothes9923
3 жыл бұрын
I can’t remember, if you want you can send me a Dm through Instagram if your still having trouble @los_traviesos_sac
@anthonyalvarenga9465
2 жыл бұрын
Do I solder the battery wire to power bar? Got very confused on this part I did not use the button switches I used the sticks
@lowlowsandclothes9923
2 жыл бұрын
It’s the same as the buttons, power bar goes on one side of the prongs connecting all of them together, if you have problems soldering then you can also use wire
@jayypeezy36
4 ай бұрын
@@lowlowsandclothes9923on 3.42 of video what are the 2 wires connected??? Im confused???
@CYESar
2 жыл бұрын
This seems cool I’m just wondering what can put this on or is it for 64 only
@lowlowsandclothes9923
2 жыл бұрын
Most bodies will fit with slight modifications but it’ll fit under most lowrider type bodies no problem like impalas Cadillacs and g bodys
@CYESar
2 жыл бұрын
Thanks man
@sus8438
3 жыл бұрын
I got the kit do I get all of that in the kit off hoppin hydros
@lowlowsandclothes9923
3 жыл бұрын
Just the parts to make it lift, you still have to buy the model and a battery
@mravila2537
3 жыл бұрын
Does it matter when doing the first motor if we use the positive side or the negative side of the wire??
@lowlowsandclothes9923
3 жыл бұрын
Just follow the diagram in the instructions, the polarity shouldn’t mater
@ajax2.550
2 жыл бұрын
Is that a limberg car model?
@lowlowsandclothes9923
2 жыл бұрын
Revel
@elhacker6222
2 жыл бұрын
Is this place still open
@lowlowsandclothes9923
2 жыл бұрын
Yup, they have a online store as well
@elhacker6222
2 жыл бұрын
@@lowlowsandclothes9923 try to call and it sounds busy all the times and email them and nothing
@lowlowsandclothes9923
2 жыл бұрын
I have called them, they are very busy tho, are you lookin for something in spesific?
@elhacker6222
2 жыл бұрын
@@lowlowsandclothes9923 looking for 1:24 scale wheels and 1:64 wheels hood hounds
@lowlowsandclothes9923
2 жыл бұрын
They’ll be on their website @ hoppinhydros.com
@kmart014
3 жыл бұрын
Are the motors johnsons? Will Johnson’s fit?
@lowlowsandclothes9923
3 жыл бұрын
Their Jackson’s but they preform the same as Johnson’s, both will fit tho
@johnstone313
3 жыл бұрын
Keep the videos coming bro on the models
@lowlowsandclothes9923
3 жыл бұрын
Sure will homie💯
@M3yeR969
3 жыл бұрын
Do I need to get rid of the interior in order to add hydros?
@lowlowsandclothes9923
3 жыл бұрын
You can but there’s also a way to use the interior but it’s usually easier when you have the whole interior as a single tub and not in parts
@kidboyvlogs435
3 жыл бұрын
Can this set fit any model car ??
@lowlowsandclothes9923
3 жыл бұрын
It will fit without any modifications under most cars especially impalas Cadillac’s and g body’s and way more, but it can also be cut and trimmed to fit most cars
@virginiacampos7250
3 жыл бұрын
Chido!!!
@derrickrodriguez7781
3 жыл бұрын
Can you do this to a hot wheel
@lowlowsandclothes9923
3 жыл бұрын
Yes but the process is a little different
@cloud-qq6uy
3 жыл бұрын
can you do the one of the dancer pls from hoppin hydros
@lowlowsandclothes9923
3 жыл бұрын
It should be happening in the future so stay tuned!
@cloud-qq6uy
3 жыл бұрын
ok thanks
@ragebeast99
2 жыл бұрын
Lowkey looks fun but for me personally theres a big problem when it comes to installing this kit.... Hudson cars are to curvey
@lowlowsandclothes9923
2 жыл бұрын
Not sure it really matters as long as the wheelbase is about the same, the plastic can be trimmed to fit other body styles
@ragebeast99
Жыл бұрын
I actually got this kit and tired a 1959 El Camino but failed. What body do you use on this one
@lowlowsandclothes9923
Жыл бұрын
I used an impala but most cars should fit, it might need trimming or something tho
@ragebeast99
Жыл бұрын
@@lowlowsandclothes9923 I'm thinking about the 63 impala
@ragebeast99
Жыл бұрын
On a bad note I absolutely messed up my kit. The 9V batteries I had couldn’t get the motor to hop properly so I hooked my dads rc car battery and it fried the motors now I’m one kit down. I’m going to get another one and wire it properly as the last one I did I got wired it. Probably gonna invest in one of the battery packs they sell.
@Christopher-et7bc
3 жыл бұрын
I used to have these. I ended up throwing them out. Couldn't stand the string snapping constantly and even fishing line snapped with low voltage
@lowlowsandclothes9923
3 жыл бұрын
I usually just double the string up and it’ll last for a little over a minute, although that can get annoying I guess it’s part of the fun, just like the real thing
@Christopher-et7bc
3 жыл бұрын
@@lowlowsandclothes9923 Yeah I hear ya. It just seems like too much of a pain in the ass. The damn gears get stripped out the more you pull them apart too.
@lowlowsandclothes9923
3 жыл бұрын
There’s definitely ways to get around it but I’m fine with how they are, the holes in the plastic get cut and then the string sticks so the first thing I always do is add some metal grommets to them, the next thing you can do is use some really heavy braided line like 100 pound test, last is to get those metal things with a set screw on them to replace the plastic gears since they won’t strip, and also double up on the braided line.
@Christopher-et7bc
3 жыл бұрын
@@lowlowsandclothes9923 Yeah your Right. I have seen all that. Maybe one day I will get another or maybe not
@ArturoGarcia-er1hk
Жыл бұрын
@@lowlowsandclothes9923use fish line it’s stronger 😉 Welcome
@bossman7944
3 жыл бұрын
How can i order a lowrider?
@lowlowsandclothes9923
3 жыл бұрын
You have to buy a kit!
@bossman7944
3 жыл бұрын
@@lowlowsandclothes9923who sells the car already hooked up🤦
@lowlowsandclothes9923
3 жыл бұрын
I don’t know your best option is to build one yourself or check ebay somtimes they’ll have them on there
@LISVIZUALS
3 жыл бұрын
So soothin & satisfying, stay up G ✨
@lowlowsandclothes9923
3 жыл бұрын
Thanks homie💯
@LISVIZUALS
3 жыл бұрын
Fasho Np !
@sus8438
3 жыл бұрын
Does it come with all of that
@lowlowsandclothes9923
3 жыл бұрын
Everything you need expect the wheels body and a battery
Пікірлер: 138