I bought your "pegs" primarily for the ability to change out the plates, but I didn't understand how to use the primer slide pins until I saw this video. Thank you so MUCH!
@user-iv3ie6qp7t
Жыл бұрын
I bought this set a few years ago and use it all the time. Thank you.
@anngable6011
3 жыл бұрын
Had a big problem with my LNL machine and the primer feed. Found your video and had it fixed in about an hour. Thanks, guys!!!
@bragginrightsprecisionrelo346
3 жыл бұрын
you are very welcome!
@xtimedt69
2 жыл бұрын
In my opinion, this is brilliant. I have had all of these issues. Just tonight had a primer go in upside down. The primer feeder is the weak link in an otherwise great machine. I just bought the tool!
@xtimedt69
2 жыл бұрын
I used this tool and in less than 5 minutes solved the problems I had been having with the primer feeder. I then loaded 100 rounds with not ONE problem. Thanks for the tool
@MYates307RC
4 жыл бұрын
Excellent information and very simple useful tools! I like how you etched the caliber into the shell plates too.
@ddhi
4 ай бұрын
Awesome Video!
@speedbuggy16v
3 жыл бұрын
Awesome Idea, I will have to order a set in the future!
@bragginrightsprecisionrelo346
3 жыл бұрын
speedbuggy check out my new video on my new tools as well I just released last night kzitem.info/news/bejne/1qKeqHl5mpt6ZWk
@bryansandoval3498
2 жыл бұрын
Interesting, how much to purchase it and where can I get one?
@andrewgauvain830
2 жыл бұрын
Genius!!
@wienerdoggin74
4 жыл бұрын
Love it!
@calebcampbell5275
4 жыл бұрын
Do you know why the primer does not always line up with the shell plate?? Also where did you get the 3 little primer tools?
@bragginrightsprecisionrelo346
3 жыл бұрын
you can buy them off of my website bragginrightsprecisionreloading.com
@ricardogastone
4 жыл бұрын
Very nice, excelent!!! Where can I find and buy these tools?
@bragginrightsprecisionrelo346
4 жыл бұрын
bragginrightsprecisionreloading.com I am out of stock at the moment, I sell out as fast as I can make them. I am having a local machine shop that has a CNC Lathe make them for me starting Friday if all goes well and will have more in stock next week.
@mightyarmoryprecision
4 жыл бұрын
@@bragginrightsprecisionrelo346 I'm surprised you haven't designed a new press yet!
@MrZola1234
4 ай бұрын
Cool tool. Think I'll go grab 1. My big primimer problem right now is the primer is there, but when i push forward to seed it, it doesn't seed the the primer... any ideas???
@chadc1125
Ай бұрын
Same here. Or it won't seat it all the way. Can't seem to figure out the fix. Did you come up with one?
@MrZola1234
Ай бұрын
@chadc1125 my problem was they were jamming in the tube.
@MrZola1234
Ай бұрын
@chadc1125 as for not seeding far enough, i would check the pin underneath and see if it screwed in enough. Alao, see if anything is slightly restricting the press arm from going all the way up.
@almiraabsin7809
Жыл бұрын
Can you do it without the tools? YES. However I have the tools and they work great, more accurate and precise and so much faster. So easy you can do it in your sleep. If you want your machine running like a Swiss watch these are the tools.
@bragginrightsprecisionrelo346
Жыл бұрын
Thank you ...I am glad you are happy with the tools.
@klauskant465
2 жыл бұрын
Why do you not ship to germany :-(
@jeffreyhall8991
2 жыл бұрын
Just talk. Hard to read and watch video at the same time.
@rbtmckeever
3 жыл бұрын
I do see where an alignment tool for the primer slide would be quick and handy but don't try to make the design appear to be worse than it is just to make a buck. Between 1:22- 1:36 in the video you are showing the primer slide upside down making the gap between the slide and the primer tube base larger that is misleading and has nothing to do with the primer slide adjustment. I have loaded on this press for 4 years and I never had an issue with the primer flipping over in fact it is impossible if you assemble the system properly.
@bragginrightsprecisionrelo346
3 жыл бұрын
nothing in the video is made to be anything different than it is and you are correct...the primer can not flip so long as it is adjusted properly...that is the entire point. My tools are simply to make it much easier and faster to adjust your primer slide 100% every time in about a minute...never do I say it cant be done with out them and I in fact have another video on how to adjust it properly by eye. The idea behind my tools are for people that wear glasses that makes it very hard to see to get it exact and for those who have their presses in tight areas running case feeders and bullet feeders etc where access to get your head in there to set it by eye is difficult. I admin a Hornady group with 14K members...trust me I know the press inside and out of the 4,671 people to this moment that has watched this video...you are the only one who has complained or accused me of anything lol My customers love me and love my honesty and I spend a ton of time in email, messaging and phone calls from my customers and fellow group members to get their presses running properly for free at all hours regardless if they have any interest in my tools or not. I have sold thousands with zero complaints, just people saying they had found them sooner. No one is knocking the design....Hornady makes a great product and I feel its the best press out there for the cost bracket. Happy Reloading
Пікірлер: 28