Thanks for this video. It does clear up a few questions I had. I have the dual tank kit. Do you have a part II to this video showing the electric drain valve installation? I'm curious where you mounted the 2nd solenoid.
@tommylogan8480
3 жыл бұрын
How would u install it if you don’t have the spare tire thing to lower it. I had to remove that part while redoing my truck because it was broken
@PowercallSirens
3 жыл бұрын
You'd have to replace it with a new one from the dealer. That is a must to make this unit work. Best of luck!
@tommylogan8480
3 жыл бұрын
@@PowercallSirens ok thank you
@tommylogan8480
3 жыл бұрын
@@PowercallSirens is there a way to install it without using the spare tire thing?
@derekddurbin
Жыл бұрын
This does help I have a 2016 Silverado 2500HD LTZ z71 and this is what I want to do I can do all of this the only part I’m not sure of is the spare tire delete are those feet just supposed to crank int the frame and it just hang and rattle or will it line up and run a bolt through the bracket and frame with a washer? Or weld it to the frame? I’m not sure about that, and the wiring I can take my Dewalt electric sander for my grounds but finding something 12v to splice into idk I do hvac so the fittings and pipe dope doesn’t scare me just making sure I’m wiring it up right and to a nice switch in my cab is important to me so I’d be interested where to go to find buttons I saw someone had a set up where they changed their main horn to train horn and was able to change it back and forth I thought was cool and it was on a 2016 Silverado like mine I Have the LTZ I think his was the ugly high country interior,but that and the mounting of that auxiliary port to where you can run and air tires up is cool I’d want to do that tight out of the back maybe use that hole where you lower the tire through for that or make a new hole. Any more videos where I can see what you did? Fantastic job explaining by the way.
@SMFFL100
Жыл бұрын
It is almost comical watching a "how to" video, made by a guy that clearly doesn't understand the full concept of the project. He refers to the solenoid as a relay, when the two are entirely different. Then he talks about the actual pressure switch and has absolutely no idea what it's purpose is or how it works. The best part is when he says that it is absolutely impossible to construct this setup without the instructions. Anybody who has basic knowledge of plumbing and electrical, could figure out what goes where, as well as modify the setup to better fit their situation. The fact that he didn't know what or where the filter went, just shows this poor guy didnt understand the concept of how a compressor works. I feel bad that I'm kinda hating on this guy, but he asked for it, making a "how to" video on KZitem, with such confidence, when anyone with train horn experience can immediately see the lack of knowledge this guy has on this subject.
@justpalms9978
6 ай бұрын
Think I’m just gonna pay to have mine installed!
@CSXandrewFEC
2 жыл бұрын
My kit is a little sideways so the horns aren’t directly straight from being on a rough dirt road…Now to make the horns straight again do I just lower it with the spare tire tool and adjust it while I bring the kit back up under neath the truck with the tool ?
@elvisbest3213
9 ай бұрын
So you are the very famous power call guy I'm a fireman and i love your power call trying to get our dept on board with them instead of the stupid i can not stand Whalen sirens lol
@789295
2 жыл бұрын
For what they charge the kits should come in a box already assembled!
@nicholasdoucette9240
2 жыл бұрын
I don’t think I have ever used the the book to install its super easy.
@keithgrey
2 жыл бұрын
Sorry guy,,,cant finish a video shot narrow.
@mendez2587
4 жыл бұрын
Did you ever make the video of the actual install?
@PowercallSirens
4 жыл бұрын
kzitem.info/news/bejne/koibxY2Yg4t0hWU
@JorgeMorales-zo6gu
7 ай бұрын
Your the best man !!!!
@pwalshj
4 жыл бұрын
Very clear and extremely helpful. Thanks for taking your time to make this.
@randallmedlin5995
Жыл бұрын
Your video very helpful,the only thing I still lack is wiring the red wire on the solenoid to the push button switch in the cab. I've had my horn for 2 weeks and still yet to blast it
@kenpoche9101
3 жыл бұрын
I am getting the Shocker XL train horn kit and I am mounting be compressor and air tank in my truck box I will be running the solenoid valve for the air release underneath the truck by the horns so my setup is a little different than yours
@jamieeg6life394
3 жыл бұрын
Wow, thank u!! This was so helpful!!
@jaysplawn1098
4 жыл бұрын
I picked up this exact set up. You mentioned if your not gonna use the horns to release the air from the tank. Will the compressor not just turn back on and fill the tank back up? Or do you mean at the end of the day to release the pressure? Great video by the way. I know which video you are talking about have stuff mounted wrong. Thanks again
@GOGSANGEL
3 жыл бұрын
Awesome video, bought my truck with a hornblasters kit already installed. One of my hose came loose on the "quad air thing" and was wondering how it was installed. I try to push it back in, but will not stay on. Will have to keep trying i guess. Thanks
@Elcoboyz
3 жыл бұрын
Cut the tip that keeps popping out about an inch and stick it back in.
@nicknabil7184
4 жыл бұрын
good video
@brotherjoeyt811
4 жыл бұрын
Great video only wish u would of said earlier about compression filter I stripped it trying to put it on now waiting for support lol
@Foever378
4 жыл бұрын
I appreciate your video. I did in fact get this and the instructions are poor and I am fairly good with working with wires, splicing and making things look good and professional. I work with tools for a living and I gotta say these instructions suck. I clicked on your video in Hope's you would install this to your truck and how you wired it but I'll take what i can get out of this. I didn't get the spare tire delete because I want this in my bed.. I'll figure this out some one or the other
@PowercallSirens
4 жыл бұрын
Let me know if you have questions, it's fairly simple if you watch my videos.
@bobkay8132
3 жыл бұрын
You DON'T have a truck, you have a pickup.
@gregorymcclain8865
3 жыл бұрын
Question for ya, can you use a latching button for the electric drain valve instead of the momentary button?
@PowercallSirens
3 жыл бұрын
You could yes,
@patrickpirronejr7998
4 жыл бұрын
You are the man! Well done! Very helpful. Thanks a lot!
@SouthFloridaFishingClub
4 жыл бұрын
Excellent Video! Thanks
@mo_muscle3513
4 жыл бұрын
Yeah I went through the same thing
@jeplumbing4950
4 жыл бұрын
Thank you, thank you, thank you!
@jimhill9035
3 жыл бұрын
Thanks U Da Man
@edgarmouret6676
4 жыл бұрын
Thank you so much for your video man that helped me a lot I just purchased the same kit and I’m excited to get it on my tundra and I’m thankful for that information
@PowercallSirens
4 жыл бұрын
Glad I could help
@edgarmouret6676
4 жыл бұрын
What length are the 4 hoses I’m at that stage now
@ryanwillard1228
3 жыл бұрын
@@edgarmouret6676 How difficult was it?
@edgarmouret6676
3 жыл бұрын
@@ryanwillard1228 sorry for the late reply I strangle withheld tagle switch I was confused because the wires were one black one white I’m not very good with electrical stuff but I ask one of my friends and we got it done I learned a lot about tagle switches 😆
@andrewm6237
3 жыл бұрын
Do you have to have the blue box?
@PowercallSirens
3 жыл бұрын
Yes that is the pressure relief valve that is a must
@andrewm6237
3 жыл бұрын
@@PowercallSirens great the one thing that didn’t come with it. Thanks man
Пікірлер: 44