Yes, I remember that video! It was a brutal awesome bash. So everyone should definitely check it out!👍🏻👍🏻👍🏻⭐️⭐️⭐️👊🏼👊🏼👊🏼🍻
@Ben-gd6wl
3 жыл бұрын
Yea I agree go check it out guys it’s INSANE 😵
@RoadsideRC
3 жыл бұрын
Thanks!
@DrLoveQc
2 жыл бұрын
I got 6 Hosim RC over the years. The brushless (Q901) destroyed in 2 weeks, its just too powerfull for the tires and rims, the tire wear off like crazy. Now Im running with my kids 3x 9130 with different covers (pickup,side by side,car). 2 old ones are used for spare parts. Takes lot of spare parts since it will get damage if you jump a lot or go crazy. My best setup is with upgraded to oil shocks, wheelie bar, t-plug batteries, metal rods, and I run 11.1V 3S battery. It is quick and last a long time. I also use a cheap chinese lipo charger so it charge pretty well the battery to full capacity. My setup is a bit too much for the plastic rods and differentials. I upgraded the front for metal, and will add all metal gear/differential. With all metal (like a Q901/902/903) it should be reliable. Never had issue with any brushed motor so far. Servo fails over time and with crashs. Since its a 5pins it's hard to find a better one hat would last a long time. Cups fail over time a lot I found, always needs to replace both fronts for the kids, sometimes I use tie rap until I get spares parts. For maintenance I add shock oil, and use marvel mystery oil for bearings, also clean it everytime it get wet/snow/dirt. Its a pretty cool chinese RC, but the parts arent very durable so at the end maybe it cost a bit more.
@RoadsideRC
2 жыл бұрын
Thanks for the detailed comment. All RCs will break eventually, especially with crashes. Glad overall you are enjoying the vehicles.
@robertrager6793
2 жыл бұрын
I ran mine on 3s also. Really fast for such a small truck. Only ran it for about 5 min on 3s. Did a double backflip from a dead stop using a wall.
@RoadsideRC
2 жыл бұрын
Yes! So fun on 3S!
@elimatus
3 жыл бұрын
It looks so much better now! 👍
@RoadsideRC
3 жыл бұрын
Yes!
@GreatLakesRC
3 жыл бұрын
Nice refresh. You did give it a hell of a beating! 🤣
@RoadsideRC
3 жыл бұрын
Yes! It really surprised me!
@thilmandufrene1813
2 жыл бұрын
Thanks man I love my lil hosim. I was wondering about shock upgrades and fabrication. Thinking about seeing if I can mount some 1/16 Traxxas e revo wheels on mine.
@RoadsideRC
2 жыл бұрын
Good question! If I remember correctly, it uses 12mm hex. As long as the E-revo tires also do, you have a good chance of them fitting.
@getyourfabon2471
2 жыл бұрын
Ty for such an awesome video !! This is the best video upgrade I have seen for this hosim ! I loved your video bashing the hell out of the car !
@RoadsideRC
2 жыл бұрын
Thanks! I really appreciate it!
@getyourfabon2471
2 жыл бұрын
@@RoadsideRC ty for your videos ! Looking forward for more ! For you have a new subscriber on me 🔥💯
@justinsnyders5347
2 жыл бұрын
best rc car ever
@RoadsideRC
2 жыл бұрын
It is a good one!
@rickrogers2649
3 жыл бұрын
Roadside RC Trauma Hospital. Great job Dr. Troy. : )
@RoadsideRC
3 жыл бұрын
Thanks Rick!
@billyb5057
3 жыл бұрын
wow giving that monster truck a major rework mate cool and good tips as you proceed *fully viewed👍Au👍like button pressed*
@RoadsideRC
3 жыл бұрын
Thanks Billy!
@achraff9748
3 жыл бұрын
Nice truck 💚❤👍✅
@RoadsideRC
3 жыл бұрын
It is! Thanks!
@MichaelPennell-d4t
Жыл бұрын
Great rebuild. Which oil shocks on Amazon will fit a Hosim 2845 1/16 RC truck?
@RoadsideRC
Жыл бұрын
I believe these will work: amzn.to/3NVBqA9
@t3floz
10 ай бұрын
Nice video! Thinking of buying this. Wonder if it backflips on 2s and if you have experienced throttle delay?
@RoadsideRC
10 ай бұрын
Backflips on 2S: depends on the ramp. On 3S: easily!! All of the budget vehicles like this incorporate a small delay into the throttle ramp-up to help reduce breakage. This one I don't typically notice/mind it.
@BradfordKBenz
Жыл бұрын
where did you get the shocks?!?!? and how did you get the right kind? this video was super helpful, i want mine to sit higher, and also where you drilled the screw holes for the new shocks did the new screw hole blow out after the upgrade? and also need help finding tires that will fit the stock rims to make it sit higher sorry i know this is alot of questions but im super excited to find this me and my son both have one of these and we love em
@RoadsideRC
Жыл бұрын
The links for the shocks is in the video description. Has held up fine. I have not changed the tires out, but many should fit.
@speedslidesandspeedrides1728
5 ай бұрын
mine goes 60kmh on 2s with upgrades and still is a beast but the gearing is very week so i upgraded it to steel and powder alloy gears and runs big 1 10 tires without any problems
@speedslidesandspeedrides1728
5 ай бұрын
the original spur lasted 5days with big tires with cnhl power
@RoadsideRC
5 ай бұрын
Awesome - glad you are having fun with it!
@jasenmaccurdy2645
3 жыл бұрын
Which do you prefer? Q903 or 16889? plus, esc will last a bit on 3s but it will probably eventually burn out. I recommend hobbywing 16bl30 esc & independent reciever. That little truggy will fly.
@RoadsideRC
3 жыл бұрын
Both are good trucks for sure. Hard to pick one.
@ΑλεξανδροςΚοσμιδης-ρ8ρ
2 жыл бұрын
What is the name of oil shocks? But at all thanks man!!!
@RoadsideRC
2 жыл бұрын
It is these: amzn.to/3Dv6Nsm
@Justwiselove
2 жыл бұрын
Have you ever heard of the Blackzon Slyder? I just bought two of them. Could I use some of these same upgrades if I decided to in the future?
@RoadsideRC
2 жыл бұрын
Never heard of it! I'll have to check it out!
@williamcrook8286
Жыл бұрын
I just ordered one
@RoadsideRC
Жыл бұрын
Great choice!
@williamcrook8286
Жыл бұрын
@@RoadsideRC what's the difference between the 2845 and the other q903 ??
@williamcrook8286
Жыл бұрын
@@RoadsideRC sorry it's the q905 and there's a couple more. I'm brand new too rc cars so....😊😊😅
@RoadsideRC
Жыл бұрын
@William Crook I'm honestly not sure if there really is much difference. Check to make sure brushed vs brushless and what equipment it comes with.
@williamcrook8286
Жыл бұрын
@@RoadsideRC I was just doing that and all I can tell is it's all the same inside it looks like the 903 is smaller the 2845 looks alot beefier idk thanks 😊 let me know if you do any more upgrades on yours I'm following you.
@marklipford3624
Жыл бұрын
Great video! I have one of these (Hosim 2845) that I use to exercise my dog almost every day. The rc car made a grinding sound and then stopped moving. The electronics are working and the steering works. I replaced the pinion gear attached the motor but it didn’t fix it. The spur gear doesn’t appear to be stripped. I’ve sent a message to Hosim but no reply as of yet. Do you have any suggestions? Thanks!
@RoadsideRC
Жыл бұрын
Sounds like you have a stripped gear somewhere. You will need to just tale it apart and see what looks off.
@paulmaldonado7039
8 ай бұрын
Be extra careful with removel,I have two of them, grinding might be diffs .
@paulmaldonado7039
29 күн бұрын
Hi Troy,i got 2 of the q903s i need to put new differential on my front end?? Vegas Paul here 😊
@paulmaldonado7039
29 күн бұрын
Can you find a video for that??
@RoadsideRC
28 күн бұрын
Great question! I don't see any videos on it out there!
@stephenksiazek812
2 жыл бұрын
Can a pickup truck body fit without changing the mounting posts? I don't like the look of the buggy. .truggy.
@RoadsideRC
2 жыл бұрын
It should fit just fine.
@eddylorenzo5033
Жыл бұрын
Quick my spring lower cups on front shock fell off do u have an idea what size they are I have the gas shocks aswell
@RoadsideRC
Жыл бұрын
Good news - if you purchase 1/16 shock parts, they will fit most of the time. Otherwise, take one of the remaining ones to your LHS to match up.
@kirkhill9239
2 жыл бұрын
Nice rebuild. How does this one compare to the HBX 16889?
@RoadsideRC
2 жыл бұрын
Both are really good vehicles. This one is brushless, so that is a bonus for sure.
@rickyking-gonzalez393
2 жыл бұрын
just wondering what's a good place to get after market parts for the xinlahong I have the brushless version the only thing I upgraded is shocks n li-ion-pi 1000 nah battery, and it's a lil beast, is there any sites out there that have parts for this perticuler model
@RoadsideRC
2 жыл бұрын
I have been able to order all of my spares from Amazon: amzn.to/3xwRUGF
@lloydgould7098
2 жыл бұрын
I just bought the 1:12 scale non brushless and no oil filled shocks but it looks great. Haven't had time to run it yet.
@RoadsideRC
2 жыл бұрын
Great! I hope you enjoy it!
@JohnDulio
3 жыл бұрын
Is there a brushless version of Hosim9135 available or is that a mod from you?
@RoadsideRC
3 жыл бұрын
This is exactly as it came out of the box!
@JohnDulio
3 жыл бұрын
@@RoadsideRC thx for your answer 👍
@patricklavoie8719
3 жыл бұрын
@@JohnDulio Yeah Hosim has some brushless trucks 👍
@eddiev8148
2 жыл бұрын
I have the 1/12 scale Hosim 9156, it’s rides really sweet but gets iffy on hard turns. Should I upgrade the servo? If so what would you recommend?
@RoadsideRC
2 жыл бұрын
Honestly, it isn't about upgrades, but just the general suspension design. I believe you will find it turns much better while coasting.
@666noMACK666
2 жыл бұрын
Which shocks are those you used?
@RoadsideRC
2 жыл бұрын
These: amzn.to/3RcBR7X
@ballpythontx8079
2 жыл бұрын
any alternative tires available? abit larger
@RoadsideRC
2 жыл бұрын
Yes - it uses standard 12mm hexes, so many tire options are out there. I would think something like this would work rather well: amzn.to/3EbYOCi
@ballpythontx8079
2 жыл бұрын
@@RoadsideRC thanks for the info
@jwoodhead345
2 жыл бұрын
You bet Do all of them lol thanks
@RoadsideRC
2 жыл бұрын
Thank you!
@kevinburns3414
2 жыл бұрын
How can I make it faster?
@RoadsideRC
2 жыл бұрын
Are you running 3S? It will take it...and FLY!
@acche-rc
3 жыл бұрын
Have you tried these Remo tires? I think you might like them on this 1/16 Hosim m.kzitem.info/news/bejne/y6mq2aWLmoeig2k
Пікірлер: 78