To prevent the vinyl from burning, I use parchment paper over the rhinestones to cover the area of the vinyl... Thank you for the demo of the glass 🙏🏻
@craftbasicsjs
2 жыл бұрын
Thanks for that suggestion, I really appreciate that... I like learning new things super helpful on that suggestion. I will definitely try that out for sure.
@craftbasicsjs
2 жыл бұрын
I really didn't think the glass was going to work but it's not bad at all.
@Glassessss
Жыл бұрын
If the applicator is completely warm it can pick up the rhinestones. I have one myself and that saves me some time when applying my crystals.
@craftbasicsjs
Жыл бұрын
Amazing thanks for that tip... I will definitely try it.
@missy3004
2 жыл бұрын
Wow!!! So glad I found this!!! So helpful!!! Thank YOU!!!
@craftbasicsjs
2 жыл бұрын
You are most welcome Missy.... 😊
@PaulReactss
Жыл бұрын
This is exactly the contact I needed! Thank you for this helpful video.
@craftbasicsjs
Жыл бұрын
Happy to be of help Paul, I'm glad you enjoyed my content.
@constancesmith5775
7 ай бұрын
My daughter and I loss our instruction booklet, this content was very helpful. Thank You.
@craftbasicsjs
7 ай бұрын
You are most welcome, I'll glad this was helpful for you 😊
@victoriastone553
2 жыл бұрын
Your amazing at explaining thank you
@craftbasicsjs
2 жыл бұрын
You are most welcome Victoria, I'm so happy you found this video helpful
@wonnie64
11 ай бұрын
Thank you, this was very helpful!
@craftbasicsjs
11 ай бұрын
I'm so happy this was helpful for you.
@BGoza07
11 ай бұрын
Thank you for the demo. I have this tool and never used.
@craftbasicsjs
11 ай бұрын
Such a great tool to have believe me.
@ladydcastro513
Жыл бұрын
Thank you for the demo
@craftbasicsjs
Жыл бұрын
You are most welcome, I'm glad this was helpful for you.
@bludolfin53
Жыл бұрын
I had a thought and it was bugging me, until I found your site. Thank you so very much for sharing. I will test my flex tool on my frosted little jar.
@craftbasicsjs
Жыл бұрын
You are most welcome, happy this was helpful.
@bludolfin53
Жыл бұрын
Yes indeed it did. Tomorrow i will begin on my project. Sometimes i don't no how to word it then i have to search and search til i finally find it. So thank you again. God bless you 🙏
@craftbasicsjs
Жыл бұрын
You are most welcome. You can subscribe to my page for more tips and tricks.
@tamilinfotainment2896
2 жыл бұрын
Nice Job
@craftbasicsjs
2 жыл бұрын
Thanks Israel ☺️... Always appreciate you!
@allysheedy67
Жыл бұрын
Amazing video!! 🤗 I was hesitant to buy one of these but wow you literally answered any questions I could possibly have for any craft 😎 I can’t wait to bling everything out haha
@craftbasicsjs
Жыл бұрын
I'm so excited for this comment knowing that it was super helpful to you. Thank you 😊
@aureasoto1544
11 ай бұрын
Hi my name is Auri. Loved your video it's better to see someone explains it in a video I am trying tomorrow. I read the instruction so plastic or crocs.
@craftbasicsjs
10 ай бұрын
You are most welcome. Let me know how it goes 😊
@coolcraftschannel3464
Жыл бұрын
it is cool
@craftbasicsjs
Жыл бұрын
Thank you 😊
@Theecouponcat
2 жыл бұрын
Tfs, just got my stuff yesterday, so far just have done masks.
@craftbasicsjs
2 жыл бұрын
Amazing... Hope you are loving how beautiful your work is coming out with this added touch.
@flashandkillerfrost2367
Жыл бұрын
I’m new user. For hot fix stones in order for them to stay can you only use the hot fix tool , or can you use the gem tac or Arleen’s jewel it ?
@craftbasicsjs
Жыл бұрын
Hi, if you are using the hotfix stones on fabric it is best to use the hot fox tool because it holds better. For those materials that cannot take the heat you can use the gem tac to put it on. But it doesn't affect the Rhinestones whether you use the hot fix tool or not.
@idajimenez1867
Жыл бұрын
Hello there! Thank you for your video. I have a question.... have you used the hotfix tool to apply stones on metal objects such as when crafting with tins...
@craftbasicsjs
Жыл бұрын
Hi Ida, thanks for your support. I have not done a test on metal but based on the notes from the instruction manual it indicates that it is not to be used on metal, leather, vinyl, plastic, wood, rubber, rock, or any Heat sensitive materials. It would probably be best to use glue in these instances instead of the hotfix applicator.
@ladydcastro513
Жыл бұрын
❤
@flashandkillerfrost2367
Жыл бұрын
@@craftbasicsjs if you use glue on the metal or other material with the hot fix rhinestone will the rhinestone hold up or will they tend to fall off bc it’s a hot fix rhinestone ? Hope I’m explaining correctly sorry if not
@jeannineerceg7773
Жыл бұрын
Thanks so much just what I needed and I was looking for. Just a question. What do you use to clean the glasses (any kind) before putting the crystals?? And thanks for having the subtitles activated 😍 I appreciate so much. Saludos desde México 🇲🇽
@craftbasicsjs
Жыл бұрын
You are most welcome... I use Rubbing Alcohol and a paper napkin/towel to do the cleaning. It removes any residue from the area. You may also use a clean piece of cloth that is not fuzzy so it doesn't leave stuff on your work area.
@craftbasicsjs
Жыл бұрын
Thanks for your support... greatly appreciated 😌
@Taiwankiddo2
2 жыл бұрын
Use the flat or next size down tip??
@craftbasicsjs
2 жыл бұрын
That's an option but ensure it seems fitting because it will be too hot to remove once you have started.
@glennischabot7462
Жыл бұрын
What is that pencil you are using to pick up the stones
@craftbasicsjs
Жыл бұрын
Hi Glennis, thanks for reaching out. It is a wax pencil for rhinestones, you can purchase this on Amazon using my link amzn.to/3s4sXON.
@danabryant9443
10 ай бұрын
Where did you get the white protector board?
@craftbasicsjs
10 ай бұрын
I purchased mine on Amazon amzn.to/488l8ez this is the link. You can also get the smaller one if that works for you.
@sherrikoers1438
Жыл бұрын
There are all kind of different plastics it would be great if you had tried it on an acrylic Starbucks cup.
@craftbasicsjs
Жыл бұрын
Thanks for the suggestion
@presillakwiatkowska1362
Жыл бұрын
is it possible to attach crystals to metal with this applicator?
@craftbasicsjs
Жыл бұрын
Hey, it might be possible yes. I'll do a test and see how it works and holds up.
@nanciebarrios7166
Ай бұрын
Can all rhinestones be used with the heating tool
@craftbasicsjs
Ай бұрын
No only the ones with the adhesive on the back. Check out this video where I explain the difference. kzitem.info/news/bejne/y4eAmKCKgoGndI4si=wMJwp6Z71WdjeXr8
@katmartinez6290
2 жыл бұрын
I'm a frist time user what do you recommend to use as stencil to draw my pattern
@craftbasicsjs
2 жыл бұрын
Do you have a cricut machine?
@katmartinez6290
2 жыл бұрын
@@craftbasicsjs no I don't I wish I had one I just used a stencil on my frist one I'll take pic and send it to you ty I sure would like to see more of your work
@craftbasicsjs
2 жыл бұрын
Hey Kat, stencils are good too if you can get custom stencils done that would be great. You can check out my Instagram page to see my work there. I'm on Instagram as @luxentprints. Install the app to follow my photos and videos. instagram.com/invites/contact/?i=riwa1szknrs4&
@craftbasicsjs
2 жыл бұрын
You can also send me the pictures on Instagram as well ok
@karenriley8529
2 жыл бұрын
Have you tried the applicator upon stainless steel?
@craftbasicsjs
2 жыл бұрын
Hey Karen, I haven't tried that one as yet.
@violetchi7351
Жыл бұрын
What's the name of the White pen pls
@craftbasicsjs
Жыл бұрын
Hi Violet, the white pen is called a Wax Pencil but you can try one of these too amzn.to/3Te7RJs. I purchased one on Amazon.
@violetchi7351
Жыл бұрын
Can it be used on net fabric
@craftbasicsjs
Жыл бұрын
Hi, if it's not a hard plastic then no. You will have to apply it with a glue instead of the applicator because it's very hot.
@blessingighomaro
Жыл бұрын
Please were can I buy it
@craftbasicsjs
Жыл бұрын
Hi, you can use the link in my description to purchase one on Amazon.
@victoriamamleayertey5869
5 ай бұрын
Please can I use any fabric?
@craftbasicsjs
4 ай бұрын
Not all fabrics are suitable for heat. You can only apply heat to some fabric so be sure before starting
@miriantorresgarcia7923
2 ай бұрын
EN ESPAÑOL
@craftbasicsjs
Ай бұрын
Sorry, English only
@craftbasicsjs
Ай бұрын
Sorry
@lululunicorn466
9 ай бұрын
Well I'm guessing the slip on the glass and ceramic surfaces is because of they are spheres?🤷🏼♀️
@craftbasicsjs
9 ай бұрын
Yes it wasn't designed for this type of application. Testing also reveals how it adheres
@kimashawn
10 ай бұрын
The directions on how to use the tool is on the package.
Пікірлер: 77