I am building a fiberglass, 1:8 scale Columbia River Gillnetter model and this video has been my bible-thank you! I have just positioned all my stations so I have a long way to go (doing this piece by piece on my social security!😊), but this video gives me hope! Blessings!
@markvittorini5163
4 жыл бұрын
Always wondered how this was done! Y'all do great work. The video was done just right!
@drfiberglass
3 жыл бұрын
I use to be a plug/mold builder and it is a lot of work. sand sand sand wax wax and wax some more..... I think after spraying it 3 times with gray durtec I would give it a clear coat then wax maybe 3 times and then PVA for a mold release....
@ericsexton6799
3 жыл бұрын
Me too!!
@khadardeek7387
Жыл бұрын
Hello sir.i would like to know if uou are able to help me in mold building of a boat that i want to make plz
@jonathandavisofkorn6919
11 ай бұрын
Ditto, this is old school for sure. Glad I got to learn this method in the beginning years of my marine career. Then 5 axis took off, then outsourcing of tooling etc.... Glad I got to "Learn" this before it died.....
@micro963
4 жыл бұрын
It’s just beautiful!! Thank you for sharing. I wish I could do that
@osmansaatoglu9958
3 жыл бұрын
Seems good so far! Was easy to talk to about his boat Plans t.co/uM8hFDqZOp Guided me in the right direction & helped me understand everything & in the end it was what I wanted
@kazimomar6820
3 жыл бұрын
You can bro Just get up and sell the equipments and start💪
@mamroberts1639
2 жыл бұрын
I can do that
@ishmael4489
3 жыл бұрын
Fantastic video. Thank you!
@hughbrien4960
4 жыл бұрын
Just like building a model boat, but on a massive scale! Well done guys, I love the curves at the bow.
@shehababdullah3927
3 жыл бұрын
Hi,can you tell me how many layers has been used to cover the mould ? And the thickness of the fiberglass material ?
@mswkickdrum
3 жыл бұрын
Nicely done video. OMG the sanding.
@chrish2996
4 жыл бұрын
Excellent video. Do you build to order or sell boats hulls please. Thankyou
@user-wc5zg5on7s
4 жыл бұрын
Nice video for boat mold constructions!!!
@jamaldarius7291
3 жыл бұрын
great detail but that room could really use a good ventilation system for all the dust and particles from spraying and sanding
@hayezmohairbi
2 жыл бұрын
That was very useful. What is the average cost to make one mold for deck and hull for boat size 29 or 30 ft ?
@klistoffequipmentmachinery9296
4 жыл бұрын
Great video, nice job.
@chrish2996
4 жыл бұрын
Want one. Great job, excellent video
@kyleroudabush6757
4 жыл бұрын
thats a big boat lol. What kind of wood is used for the planking? can it withstand high temps?
@titter3648
3 жыл бұрын
How was the plug removed from the mold?
@blong2898
Жыл бұрын
Absolutely amazing work!
@guachingman
Жыл бұрын
hey thank you for the nice vid, great team work
@jappecoco
3 жыл бұрын
Nice info, thx for sharing
@timekeeper5275
4 жыл бұрын
Thank you guys for that video.
@Ronny25526
2 жыл бұрын
Do you make molds to order? i would like to order a couple of units.
@barryrudge1576
2 жыл бұрын
What you didn't show was how you extracted the wooden buck from inside the new mould. I can only presume it was very tight and had to be broken up.
@petecommanche9344
Жыл бұрын
As long as you do a thorough job of waxing the final surface of the bucket, the new mould mostly just peels straight out.
@intalik
8 ай бұрын
Compressed air. Pops the boat out.
@Djm02152846
3 жыл бұрын
Whats the name of the mold? Looks very nice!
@nowisthefuturenitf8210
3 жыл бұрын
It's the most beautiful and detailed process
@daviddiehl197
2 жыл бұрын
Hell, I'd buy the plug and make a boat out of it.
@sikskillz2186
2 жыл бұрын
awesome, what’s the cost for a mold ?
@jsbossler
22 күн бұрын
as someone who's designed quite a few hullforms (lines plans); this one is a beauty
@ExploreComposites
3 жыл бұрын
Great video of the process! Did you have lots of blocking out the tooling gel on the inside of the mold from the strip planking printing through? I’ve found it helps to glass the wood plug before fairing but this adds a whole big step and extra cost - but makes the plug surface more stable. Looks like you have a very efficient process - thanks for sharing!
@akhuntfish7557
3 жыл бұрын
Yes glassing the plug before fairing would be more time consuming and expensive. We always try to keep the overall cost down. This process has worked well for us. A quick finish sanding in the mold took care of any imperfections the strip planking might’ve left. Thank you for the comment!
@keremtopdal2905
Жыл бұрын
@Li Li dont lie... I am in this business and in Turkey we have the same machines and that is impossible to make a this big mold less than a day... this big takes about a week... they use cubic PU material. and because it has to be precise cut the head of the cnc machine supposed to turn fast but move slovely... You dont have that tech in chine only babe, as you learn that tech from germany... so dont make it that china has everything and you know things... plus this is not outdated, still used because that tech is 3-5 times much more expensive than this way...
@guachingman
Жыл бұрын
@@keremtopdal2905 🤭
@alayhan2117
4 жыл бұрын
Nice looking boat good job guys
@gulfmaster4189
4 жыл бұрын
AL AYHAN Thank you!
@dennisbasargin6580
4 жыл бұрын
Miss all that sanding!!!
@Royl12345
4 жыл бұрын
Looks shiny
@reelchaoscharters3605
4 жыл бұрын
What kind of boat? Manufacturer
@khadardeek7387
6 ай бұрын
Anyone who knows how to build such a boat.i am based in nairobi kenya kindly let me know if you can help nd i am ready to pay for whatever it takes thanks
@ahmaddamaj2147
2 жыл бұрын
What kind of resin dose it need ?
@JOEGGGJOE
2 жыл бұрын
Awesome music.
@yavuzozaskin45
4 жыл бұрын
Everything is very nice but o wonder the result .👍👏👏
@user-ny5be4lm8z
3 жыл бұрын
I am interested in knowing what is the white paint used on the mold and the primer are they some special type or regular wood primer cheers Ed
@akhuntfish7557
3 жыл бұрын
White is just drywall mud, and the primer is an automotive primer
@raimunderdwiens1502
4 жыл бұрын
Hulls for Fishing Boats?
@kingdrew6665
4 жыл бұрын
WOW...that's super impressive, most people don't realize what it takes to do this.
@keremtopdal2905
Жыл бұрын
@Li Li dont lie... I am in this business and in Turkey we have the same machines and that is impossible to make a this big mold less than a day... this big takes about a week... they use cubic PU material. and because it has to be precise cut the head of the cnc machine supposed to turn fast but move slovely... You dont have that tech in chine only babe, as you learn that tech from germany... so dont make it that china has everything and you know things... plus this is not outdated, still used because that tech is 3-5 times much more expensive than this way...
@cgriebel1
7 ай бұрын
Unless I missed something...when did you guys remove the framing/wood plug structure? It appears you omitted the process entirely? The video goes from flipping over the entire plug/mold to morphing into a real mold, sans framing structure. What was involved in the removal of the wooden structure, and when was this process done??
@BasarginBoats
7 ай бұрын
There was no footage of this step, but the plug/framing was broken apart and removed by hand after the mold was flipped over.
@cgriebel1
7 ай бұрын
Yes, I caught that when it was flipped. Thanks!!
@mitch_the_-itch
3 жыл бұрын
How much would just a blank hull cost?
@hameddariya561
7 ай бұрын
Hello, good time, the cartoon was great. I am from Iran, Persian Gulf, Bushehr region. How can you help me make a boat like yours?
@nathelm
3 жыл бұрын
When I grow up this is exactly what I want to do.
@indarsingh8363
3 жыл бұрын
Go for it kid . Im a boat builder as well and my career started off as a dream, nothing is impossible, once you have the love and passion for it thats what it takes to be a successful boat builder. Good luck from Don Marine Boating Company. Trinidad and Tobago. 😎😎😎😎😎
@123OGNIAN
3 жыл бұрын
Go for it! just remember to always use quality masks.Last thing you want is fiberglass on your lungs.Safety first.
@Ayrco1
2 жыл бұрын
Wholesome
@ericmoody3944
2 жыл бұрын
I found a boat shop in the yellow pages 20 years ago, called them up for a job and I still work there. I learned so much more than building boats.
@wonderhuman9712
2 жыл бұрын
@@indarsingh8363 ;सर क्या मै आप से बोट के बारे मे बात कर सकता हूं नँ पलीज
@garomaint2597
3 жыл бұрын
Spettacolare. Thank you!
@NASTYVIDS
3 жыл бұрын
What hull/shop ?
@mohaabdi8056
4 жыл бұрын
What are the layers of paintings you’re applying and why do you have to sand them every single time you apply them?? Thanks for your answers. Much appreciated!
@gulfmaster4189
4 жыл бұрын
moha Abdi The first coat is paint (Gelcoat) after applying fiberglass over Gelcoat the surface gets sanded after curing before other layers of fiberglass gets put on. 2-3 layers can be put on at a time while wet.
@mohaabdi8056
4 жыл бұрын
Gulf master thank you so much for your answer. I really appreciate it.
@reinohj9882
4 жыл бұрын
Me gusta esta labor me gustaría perfeccionarme en un lugar asi
@danreece9669
4 жыл бұрын
my dad's gillnetter was built like this..36ft x 11 ft , full throttle it does 21 knots with an in line 300 HP .
@steev910
3 жыл бұрын
share with us the plans
@shofiuddin8969
3 жыл бұрын
I am looking to follow all the procedures of this video to make it for fun!!! I just want to ask you if Will be expensive to build a fibreglass speedboat or just buy one?
@charonstyxferryman
3 жыл бұрын
Go with buying the cheapest speed boat hull one you can find, i.e. no motor, and a speed boat that are more shipwreck than boat = you has to be good at fiberglassing. You can also make a composite boat : Take an existing wooden boat, make the hull in a perfect condition, but minus paint and tar, then make it *very* dry before you're fiberglassing the wooden hull You can also use an existing wooden boat as a mould, remember to dry the (unpainted!) wood or you will get problems with the fiberglass end result.
@jaquigreenlees
3 жыл бұрын
Less costly to buy one than build one. There is a massive amount of engineering going into a speed boat hull, any mistakes in construction and boat sinks. Buying one you have a builder to hold responsible for shoddy work in that case. ;)
@sergiomarmayen5702
Жыл бұрын
Que materiales le colocó a el molde para el alma. O la estructura queantiene a el molde?
@codypowers3856
2 жыл бұрын
What’s used as the core??
@andyw3851
3 жыл бұрын
How to build a fiberglass boat... Step one: build a wooden boat
@tristanmccauley2318
3 жыл бұрын
Lol
@junity1
3 жыл бұрын
How was the hull taken out of the mold ??????????????
@screens1979
3 жыл бұрын
I love the smell of fiberglass in the morning... 😐
@jamaldarius7291
3 жыл бұрын
you notice how there’s no ventilation system in that room? those guys walking around without respirators when they were spraying primer must have lungs of steel or just don’t know the dangers
@IamWeeklyBills
2 жыл бұрын
I have a hull already built that went out of business in the early 90s and I wanted to make some slight changes on the hull and make a mold out of it. What is the best way to make a mold from a hull already built? Do what u guys did and use it as a plug and then build around it?
@akhuntfish7557
2 жыл бұрын
Yes probably best to use the hull as a plug after fixing any blemishes and making the changes.
@nonzensy1554
3 жыл бұрын
what is the gel coating and what brands are offered? and how do you flatten the screwing holes?
@jamaldarius7291
3 жыл бұрын
3M marine filler or “bondo” works great for filling screw holes, a lot more structural integrity than fairing compounds
@indarsingh8363
3 жыл бұрын
Awesome job.😎😎😎😎
@hawkie333
2 жыл бұрын
Very impressive!
@efrainberrios8494
4 жыл бұрын
Awesome!!
@madikinteh8860
2 жыл бұрын
Great job ✊🏾❤️💪
@dangabrielyurango2802
4 жыл бұрын
Is that supposed to be water jet propelled?
@sametsenturk7381
4 жыл бұрын
good job
@chamnaplim1195
6 ай бұрын
May I know the materials used to make core for this boat mold, please? It's such an amazing work. Thanks for sharing!
@BasarginBoats
5 ай бұрын
It’s an end grain balsa wood core. Thank you!
@Kevinthedegenerate
10 ай бұрын
I’m confused as to how the mold come off the stand when the curvatures are being placed. How do they not attach it to the stand
@miffyleslie
Жыл бұрын
Where can I get the plans and framing to make a plug? Is there somewhere that sells kits or something? Very interested in making a plug.
@gulfmaster4189
7 ай бұрын
We drew up the plans to scale, top view, bottom view, side view, all the frames are measured to scale, cut and built no computer, old school.
@blakanal7222
3 жыл бұрын
Why are there no stringers on the hull?
@JamesJones-cx5pk
2 жыл бұрын
The wax between is what helps them separate. It's just like bedding a rifle.
@oundhakar
3 жыл бұрын
Isn't that stern too flat? I'd have expected some curvature and slope here.
@user-wc5zg5on7s
4 жыл бұрын
I'm wondering if you can film the part of main deck or flybridge.
@gulfmaster4189
4 жыл бұрын
林家豪 kzitem.info/news/bejne/s2OCqWmNm2qrfXo
@thennarasanarasu5599
4 жыл бұрын
Super
@henrysantos121
Жыл бұрын
Magnificent Job well done,
@Tingtvph9226
3 жыл бұрын
my dream is to build a boat like this to travel around the nation.
@rotaxrider
Жыл бұрын
What’s the name of this hull?
@lindamermaid
3 жыл бұрын
Can you say PPE? Do you know what it's for?
@Mr_Damion_Scott
3 жыл бұрын
Awesome
@mt2020
2 жыл бұрын
I wish you would have shown the removing of the wood frame from the inside
@nathansteinberger3634
10 ай бұрын
Parabéns pelo capricho
@sul-barmaritim4363
3 жыл бұрын
Waoo beatuful👌
@emonemonahmad3496
Жыл бұрын
I working south Korea FRP,, (fiberglass), making ship for 5 years
@ryanembry9059
4 жыл бұрын
Sure don't miss making these things
@trevor5290
3 жыл бұрын
Incredible cost of man power and epoxy etc etc.. no wonder they cost so much.
@user-bh5zb2xo6w
3 жыл бұрын
Price??
@luismasso2374
3 жыл бұрын
Soo cool👍👍
@woodyahh2110
4 жыл бұрын
Nice
@rocketman5648
3 жыл бұрын
Thank you...
@shichenjie5918
3 жыл бұрын
Shall we have a new cooperation mode with you?
@tristanmccauley2318
3 жыл бұрын
All that work before a boat is even built, if that mould is looked after you can build plenty of boats out of it. Bloody big boat.
@kolsen6330
4 жыл бұрын
Damn... Whats with the clouds of nasty dust??? How hard is it to get an old furnace fan and tape a couple of furnace filters over the outlet to pull all the dust out so you can see what the heck you are doing. Take it from an old shipbuilder, that that dust is an annoyance now, wait till you get older and it all catches up with you.
@user-ll3wm9op2v
3 жыл бұрын
There are good used lungs sold on ebay, at breath taking price 😅
@DanTheManIOM
3 жыл бұрын
what material is the planking ? 1/4 plywood ? IDK
@akhuntfish7557
3 жыл бұрын
1/2” mdf
@coboloco1150
3 жыл бұрын
The beauty of bottom v ✌️
@rafikbholim252
3 жыл бұрын
Very nice wonderful video
@sabiqsadiq1477
3 жыл бұрын
Good ideas....
@fabriciopaladino915
2 жыл бұрын
Una obra de arte Hasta. El David de miguel Angel se sacarian el sombrero
@MinTerGyi007
Жыл бұрын
ချစ်စရာလေးပါ ❤️🌊⛵👍🏼💯
@NicsHODLN
11 ай бұрын
If I could find one I'd use the mold itself as a boat.
@konstantinr.7123
4 жыл бұрын
Beauty
@maythuymhat
3 жыл бұрын
Tuyệt vời 💯👍😍
@alexandergunarso2308
3 жыл бұрын
How long it takes to finish the mold?
@akhuntfish7557
3 жыл бұрын
This process took about 3 months
@h.s76
4 жыл бұрын
Good morning sir Do you help me to make mold of slide
Пікірлер: 225