Wow, He tapped his hand with the tiniest soft mallet in existence, and his hand didn't brake. Amazing! 🤣🤣🤣
@armandoravina1531
2 жыл бұрын
LMAO!!!!
@ArnoldQMudskipper
Жыл бұрын
Hands are definitely needed for braking 👁️👄👁️
@austin_not_boston
Жыл бұрын
My goo also hardens on impact 💀😂
@chikamichi
5 жыл бұрын
"It's called a non-Newtonian substance, which means the Newtons inside the product […]" => seriously? :facepalm:
@Liljoozy
4 жыл бұрын
I heard "newtons" as well, but thought his accent was messing up "neutrons," which also seemed a little weird to me, but I'm not scientist.
@Jake-um8qt
4 жыл бұрын
Lol this is hilarious.. He should know what a non-newtonian fluid is if he's going to state that his product is one. LOL
@chrisawesome3091
3 жыл бұрын
@@Liljoozy even if he said neutrons, that wouldn’t be correct. Neutrons cannot leave the nucleus and if they do, they become unstable and release radiation destroying themselves. He was making stuff up
@joshuagcwong734
3 жыл бұрын
We, the scientists, rolling our eyes into our skulls 🙄. Jesus he doesn't even know his own product 🤦♂️
@michelevecchio8859
3 жыл бұрын
"... newton inside the product are free flowing..." me imagine many little Newtons wandering ahahah
@oneofusall
3 жыл бұрын
The smalless hammer they could find... that really represent well the hit you get from hitting the dirt at 50kh/h
@mguarin912
4 жыл бұрын
I’d love to see a hatchet 🪓 used, since it seems most surfaces that cause me problems are sharp/jagged.
@DavidBivens
2 жыл бұрын
So do this: take a tack hammer and whack your knuckles with it. Hurts, right? He gave a reasonable demonstration, and screwed up one word. (Maybe he meant "molecules"?) As a motorcyclist, I'm interested in anything that can effectively dissipate impact forces. And, @KevStar, I think you meant "break", not "brake". See? It can happen to anyone. Sheesh.
@Sky2I
4 жыл бұрын
Difference between a newton and a neutron. A newton is a measurement of force used against an object, it's a vector since force can be applied in any and all directions. A neutron is a stoichometric sub-atomic particle in materials, which is not positive or negative. Say I push something with 20 newtons of force, it may move, but that depends on the mass of the object, the shape compared to the drag, if we're not talking about vacuum, and friction, if the object is flying or not. AKA newtons are a measurement of physical change in an object, I have not seen anyone do any calculations with newtons and force on a sub-atmoic level, although I've seen stoichometry done, and have done it before. Either this product is magic because it makes forces come from the ether to protect you, or it's low Poisson ratio of the material succumbing to plastic deformation. (Where more material is pushed together with uniaxual stress. Please note that I may make a mistake, and I would be delighted if someone could point it out, I'm open to always learn(Probably with the doings of forces on a sub-atomic level since there is binding and breaking energy, thermal energy, wont get too much into it, but at this level, I'd say I've never seen someone use newtons when dealing with sub-atomic forces).
@Don2006
3 жыл бұрын
Never studied materials science, but I did love fluid mechanics back in university. The low Poisson's ratio is an interesting way to think about it. The guy was actually explaining the concept of a shear-thickening fluids correctly, but I have no idea why he mumbled the word "Newtons." The armor contains a colloid (insoluble solids suspended in liquid). When subject to no or low rates of shear, it behaves as a fluid because the suspended solids are able to "get out of the way" as the mixture deforms. Beyond a critical shear rate, the solids cannot redisperse fast enough and end up clumping together. So if instead of "Newtons" he had said "polymer colloid" he would've been rather correct!
@Dixiecraftsman
2 жыл бұрын
I cant stop laughing that "hammer" is definitely not what I call a hammer
@smokey04200420
Жыл бұрын
He meant molecules.
@richardbently7236
3 жыл бұрын
So what happens if you actually fall, we don't get ball bearing and ballpeen hammer storms around where I live.
@cyclerecon3750
2 жыл бұрын
'The Newtons inside the product...' this guy knows his physics
@smokey04200420
Жыл бұрын
He meant molecules, but he said “Newtons” instead, because he was talking about non-Newtonian fluids. I came here to see if anyone else caught on to what he said.
@Aliencreep369
3 жыл бұрын
Loooooollll that hammer 😆😆
@cfldriven
4 жыл бұрын
The gel is not how the actual product is sold or used. Put on a glove with D3O and try a hammer, that a real world test, not something that now of us can actually use.
@chrisawesome3091
3 жыл бұрын
I wish there was a way to buy the gel
@HughMcGuire
3 жыл бұрын
@@chrisawesome3091 From the way it handles, It looks exactly like some science putty stuff that I have from when I was younger, I think it was from the science museum. it was the exact same color and all. It is actually very good at dissipating energy, however I don't think the pads would have the same properties as they seem to be made out of some other material and not putty.
@chrisawesome3091
3 жыл бұрын
@@HughMcGuire oh. Thank you. I’ll look up the science museum shop
@Kyle-kc8cw
Жыл бұрын
Just FYI to everyone....these aren't some new, high-tech untested prototype thingies or whatever. They've been in production for years now. You could certainly get your hands on one of these relatively easy. They're commonly used in sports or motorcycle protection, and I know some work gloves have these materials, too.
@DrMarvinLara
2 жыл бұрын
I placed my hand on concrete, put my pad on my hand and hit it with a real hammer and it hurt like hell. My finger swelled up a bit and I had to ice it so it would stop hurting
@Jandejongjong
3 жыл бұрын
Level 1.... pfff If you cut up a yoga rug it’s level 1.
@BushmanCanuck
5 жыл бұрын
Is this stuff going to mutate my DNA? 🤔😁
@The-Azure-Knight
4 жыл бұрын
Yes
@gkewley42
3 жыл бұрын
"hammer"
@dragonwing4ever
3 жыл бұрын
it would be cool if we could buy sheets to shape and use how we want to suit our needs since i personally need something a little different to enduro or motocross since i race speedway sidecars i need some seriously good impact protection but i also need to be able to move around very easily
@madoric13
3 жыл бұрын
You can buy solid or mesh sheets of D30 online. From there you can potentially cut them to shape and modify them.
@midgetman4206
3 жыл бұрын
@@madoric13 Would they be any less safe?
@madoric13
3 жыл бұрын
@@midgetman4206 I don’t see how cutting what is essentially a sheet of foam would decrease its original protective properties, but so far I haven’t seen anyone try it with D30. You or someone else would have to test the material out for yourselves.
@rollopolloboymarch1074
4 жыл бұрын
WHERE can I buy a sheet?
@mechanicalman1068
3 жыл бұрын
Dude, I’ve watched this basic demo on numerous videos. Why don’t they ever do the test with the actual armor instead of the foam? It sitting right there! And the ball bearing this is misleading and does not really correlate with real world uses. Just fishy.
@henrikaugustsson4041
Жыл бұрын
Because it obviously doesn’t work, it’s a scam.
@andytrace
2 жыл бұрын
Why does nobody do the hammer test with the actual D30 product instead of using that goo which is clearly totally different! 😱
@Thomas-fk6ep
3 жыл бұрын
So modified Oobleck?
@arnarize
2 жыл бұрын
Was looking for that comment
@cenktoplar8378
Ай бұрын
''As you can see its a 'hArD hAmMeR' Shows the hammer : 💩
@wiadroman
Жыл бұрын
"Newtons inside the product are free flowing" - must be really small Newtons, micro Newtons, or uN.
@cellokid5104
6 ай бұрын
"The Newtons inside the product are free flowing"😂😂😂
@Jandejongjong
3 жыл бұрын
What a noob demo... where is level 2?
@roboutot4839
Жыл бұрын
Coolest product explained by a boring guy...
@goncalovazpinto6261
3 жыл бұрын
One litlle Newton tra-la-la, two little Newtons tra-la-la, three little Newtons...🤣🤣🤣🤣
@Hondafn
3 жыл бұрын
This is why I want them rival boxing gloves lol
@brendon8702
4 жыл бұрын
that hammer couldnt break a bone if you tried
@alanmendoza3742
3 жыл бұрын
But it will still hurt
@tmdad
2 жыл бұрын
How about using an 8lb sledge hammer.
@krystianzaplacki3890
Жыл бұрын
Hheh takim młotkiem malutkim to możesz sobie pukać
@piee683
3 жыл бұрын
Insteps crocodile Dundee "mate that's not a ammer "
@downsouth701
3 жыл бұрын
Not so great
@Radnamrok
2 жыл бұрын
Non-Newtonian fluids are fluids that don’t follow Newton’s Law of viscosity. The law basically says that the viscosity is independent of stress, which is true for fluids like water, gasoline etc. cornstarch slurry is like the most well known example of non-newtonian fluid, but there are other common examples too like honey, blood, lava, toothpaste, mayonnaise etc.
@jiraiya2000
2 жыл бұрын
can d30 be used in vehicle suspension?
@FerrariTeddy
Жыл бұрын
Unfortunately no it would act like a rock when you hit a bump, basically making your car wobbly and boat-ey normally and then it hits bumps like it has no suspension. I see what you were thinking tho, for that application we would want something with more elasticity. Look into cheap bicycle forks/shocks some of those use a plastic/rubber insert as a suspension the way you’re thinking of using d30
@smokey04200420
Жыл бұрын
1:03 “the newtons inside the product…” wtf are Newtons? Do you mean molecules?
@ianyoung8392
Жыл бұрын
Does the Endura MT500 have the extended utility with Judo, volley ball etc? I currently use Mizuno volleyball knee pads which have gel but it's not D30.
@johnazu476
2 жыл бұрын
O man that was funny he tapped with a Lego hammer and still looked nervous, take the video down guys your making a laughing stock of your product
@sfafsashfdh6589
Жыл бұрын
0:43 "pretty hard hammer"
@OdaiNekromos
Жыл бұрын
grabs a tiny soft rubber hammer that would not even hurt your hands without any protection
@DrMarvinLara
2 жыл бұрын
If the pad tears a bit, can you glue it back somehow?
@dolamskudoiski306
Жыл бұрын
problem... Y'know the saying "It's not the fall that kills you, its the sudden stop"? This would make the stop even more sudden. Also how does it go from being goo to- staying is a shape without slowly becoming a blob?
@smokey04200420
Жыл бұрын
It spreads the force of the impact throughout the material. This also means that more material = more protection.
@EvoXalex
3 жыл бұрын
This is the most disinterested commentator ever !!!!
@Jandejongjong
3 жыл бұрын
It stil bounced up pretty high...
@gamewavelondon
2 жыл бұрын
I dont believe this
@adikpandaicakapenglish7971
3 жыл бұрын
millions of newtonssssss
@rangawal
2 жыл бұрын
"Up to 40 degrees and above"?
@gscott5062
2 жыл бұрын
Celsius - 40C = 104F
@rangawal
2 жыл бұрын
@@gscott5062 I think you missed the point. Is it up to 40 degrees, or above 40 degrees?
@olitonottero7620
4 жыл бұрын
love it
@noncompliant209cali
3 жыл бұрын
They always demonstrate with the goo, so it must be stronger. It probably gets weaker when they turn it in to the foam
@henrikaugustsson4041
Жыл бұрын
The question is if it even works since we never see them demonstrate on the actual products.
@brendonr980
3 жыл бұрын
This stuff needs to be put into polymer form and added to paint and gel kote
Пікірлер: 81