1). THANK YOU!! 2). Those having difficulty hearing or understanding: Go to settings. Turn on Captions. This will assist. Thank you again.
@Mikesorrento3344
2 жыл бұрын
Very good advice. Thank you.
@eckhardgrohe2736
2 жыл бұрын
I am not clear on what fixed the E9 error code. Was it the sensor change or was it a freon refill? TIA for your support.
@tvbaaron
2 жыл бұрын
you bypass the sensor to see if the problem from the sensor, if you bypassed the sensor and your dehumidifier still not make water then you need some freon
@khalidjaii2
Жыл бұрын
I am sorry; I can't understand what you are saying. please redo the sound.
@JaseCJay
Жыл бұрын
Jump the two wires for the sensor.. if you get ice/water your sensor is bad! If you jump the sensor wires and you don't get ice/water your refrigerant is low or empty! Pretty straight forward video that does not need redoing.. you simply need to address your comprehension skills!
@FlaschDJ
Жыл бұрын
@@JaseCJayTurn on Captions to help understand.
@FlaschDJ
Жыл бұрын
@@JaseCJayPlease forgive the stupidity of this question. HOW do I jump the 2 wires? Do I need to solder? Or can I use alligator clips? Thank you
@JaseCJay
Жыл бұрын
@@FlaschDJ jump the corresponding wires in the white connector plug.. figure it out by looking at the circuit board and tracing back to the connector! A small enough wire to fit in the pin holes in the connector should suffice..
@flaviocaetano1709
Жыл бұрын
You should speak clearly men
@psketch
Жыл бұрын
Right?🤦🏽
@anthonyhusband8779
Жыл бұрын
Man speek up ...very bad
@FlaschDJ
Жыл бұрын
How many languages do you speak? Do you speak them all perfectly? Do you have any accent?
@FlaschDJ
Жыл бұрын
Does this sound like a bad sensor? When my dehumidifier is off and I turn it on, it will work great for about 20 minutes. Then it will stop and show E9. I can then turn it off and back on again. It will work again for about 20 minutes, shut off and show E9. Etc. Also: Yes, it DOES make some water before E9.
@tvbaaron
Жыл бұрын
It could be the sensor or the freon is low. That is why you need bypass the sensor by connect the pin together. If the sensor pin connected together but it still not make any water then the freon is low. If it made water the the sensor is bad. Hopefully you understand the way to figure what wrong
@alvanjudson2836
2 жыл бұрын
Thanks for the video. At 2:21 you mention that we should try connecting 2 of the sensor pins together. Which 2? Thanks.
@tvbaaron
2 жыл бұрын
Where the thermal sensor connect to the board. The white sensor have 2 wire -just bypass it- make them become 1
@alvanjudson2836
2 жыл бұрын
Many thanks.
@DallasCanada
2 жыл бұрын
Hi, can you show me a link where you bought that replacement sensor?
Bonjour ça fait 2 que j achète et fonctionne pas long (1mois) et le code 9 pour quoi ça fait ça et comment régler le problème merci
@debiakerlow6995
Жыл бұрын
Cant understand a word you are saying
@FlaschDJ
Жыл бұрын
Turn on KZitem captions to better understand
@debiakerlow6995
Жыл бұрын
Difficult time understanding you. But it looks like it would be helpful 🤷
@almanz01
Жыл бұрын
what is the number of the sensor for buying it to aliexpress
@aarongo3960
Жыл бұрын
Have you try to bypass it ? I don’t want you to waste money to buy the part
@buder5116
4 ай бұрын
well my sensor was full of dust testing now on a rainy day should be quick to know if it was just the dust xD edit: yup it was just dust in the sensor for me
@seanobrien116
Жыл бұрын
Don’t forget to check the refrigerant. Mine was completely empty.
Пікірлер: 37