these type of reports making any simple job, is super expert and infinite precise :D
@muhammadmehransheikh
2 жыл бұрын
I appreciate you Dear ☺️
@jdlee1055
9 жыл бұрын
If you look at Edward Hoppers painting "Nighthawks", painted in 1942, the diner which is represented has a huge curved glass window. I assume that the building was built in the 1900-20s(?). It is amazing to think that they used similar technology or alternative technology to make that window 100 years ago. Certainly no UV light to find those specks of dust.
@ragnaroksbringer
7 жыл бұрын
I watched this video muted, but I can tell you the purpose of the UV light isn't to find specks of dust. The UV light is to determine which side of the glass is the "tin side". Modern glass is floated on a bed of molten tin to make the surface smooth. The article "float glass" on wikipedia will give you some information. The float method was invented in the 1950s, so a UV light to determine tin side would've been unnecessary.
@Dragon-Slay3r
Жыл бұрын
Oh this for the middle of the tv aka the headless elf samurai
@-7070
8 жыл бұрын
there are places much cheaper then that. just to curve it $200 minimum is abnormally expensive
@EpitomeofALady22
3 жыл бұрын
I need to purchase a piece of curved glass. Where can I get it?
@ThatOneScienceGuy
10 жыл бұрын
Whoa. I don't get the part where they have to remove every single dust particle. I mean in that huge filthy room there MUST be dust floating around in the air and as soon as you have it wiped down more would have fallen on the glass.
@Engineer9736
8 жыл бұрын
+Metroidvania1981 Protagonist is talking about the workplace in the video, and he is right. I currently work for 7 years in a cleanroom, and i can say that the cleaning talk in this video cannot be taken seriously. Removing dust particles which cannot be seen by naked eye in an old shed where swiping the floor would probably cause a dust explosion.
@1Howdy1
7 жыл бұрын
Am I missing something? Who freaking cares if dust particles that can't be seen by the naked eye fall on window glass? They take care to ensure a clean surface. Yes, there is dust floating around. Yes, all the glass in your house is rough at the microscopic level. No, you can't see it, the glass looks as clear as, well, glass.
@thomas8853
6 жыл бұрын
It’s probably one of two things. The dust would infiltrate (the manf. Eng. term not a loose word choice)the glass due to heat. For such an expensive piece why risk that. Another option is the glass release agent get thinner as the glass bends convexly in to the mold. This is less likely. I had third option but the second most likely would win me the lottery if true.
@AdelGhouini
5 жыл бұрын
kzitem.info/news/bejne/sa5jmmWKcHmipIo
@user-ys1xh2yb8r
8 жыл бұрын
عمل جميل
@dernawey
8 жыл бұрын
hi i need to contact the factory please send me their name .many thanks
@lynnehawthorne9986
7 жыл бұрын
Please see the video on curved glass...
@ObliviouslyGifted
3 жыл бұрын
Where the f**k was the ending and the finished product!?!???😐😒
@EpitomeofALady22
3 жыл бұрын
Company name?
@098Usama
10 жыл бұрын
What is that process called?
@Engineer9736
8 жыл бұрын
Glass bending
@bill3641
5 жыл бұрын
Shape Shifting
@mohammadreyazkhan
7 жыл бұрын
sir this glass are you cutting do this ya shawver Glass
@Dragon-Slay3r
Жыл бұрын
They make a huge glass with a line at the top and bottom of it
@CatLoveLove55555
7 жыл бұрын
what is the solution at 2:23 ?
@jfinger9837
4 жыл бұрын
detergent, clay and calcium carbonate
@GUTTERWITCH444
3 жыл бұрын
I work in curved glass
@afzalmushtaq6868
3 жыл бұрын
90 degree bend L bend how to bend???
@navjotsingh5471
5 жыл бұрын
Tafan Glass catting
@JohnnyMarsden
12 жыл бұрын
The word "Temperature" actually has four syllables, not three.
@madeariartha2546
5 жыл бұрын
Tem-pre-chur
@EpitomeofALady22
3 жыл бұрын
Who actually pronounces it with 4?
@mohammadreyazkhan
7 жыл бұрын
I am Mohammed ESA from India I am Glass workar
@umeshsaini6896
3 жыл бұрын
Do the glass become weak After benting/curving ???
@GUTTERWITCH444
3 жыл бұрын
@@umeshsaini6896 no same strength as it went in
@lukepercy8525
6 жыл бұрын
overuse of alliteration...
@agnelodsa788
5 ай бұрын
Any heating of any material is always done slowly and so is cooling. Telling all these things, he thinks people are fools. Usual american shit talk.
@jollyandwaylo
4 жыл бұрын
I wish the announcer would have studied the subject for a few minutes before he said such ignorant things. It isn't dust that is the problem, it is oil from fingers and other places that can permanently mark the glass if not cleaned before heating. Dust burns off at those temps. This is old technology, with my electric kilns, I just program the computer and walk away until the next day. I put the glass directly on the mold without special heating. I also don't coat the glass with release, just the mold.
@GUTTERWITCH444
3 жыл бұрын
I've been working in curved glass for 10 months now and we do the same we just clean the glass put it in the kiln with cold bars close it up turn it on and walk away until the next day
@sammyd7857
Ай бұрын
It isn't curved glass it is bent. According to AUSTRALIAN companies
Пікірлер: 40