It's nice to know a product like this exist to resolve that issue I did it using a relay and a decent size capacitor from an old amp I parted out but that may not be something for everyone so it's nice to see something that is kind of plug and play thanks for posting.
@markgarroutte4561
3 жыл бұрын
Good stuff, if you're not an OCD person the pop doesn't hurt anything, you should hear my band's amps do the turn on thump for the last ten years,it's just the sound of signal
@jeffmabry7775
4 жыл бұрын
I enjoy watching your guys videos on car audio installments, very nice clean professional work that looks like factory.
@NoodlEyeJoe
3 жыл бұрын
You guys are lifesavers! Best audio gurus on the web ✌
@Hoppysjunkyardrally
4 жыл бұрын
man thats a sweet part.. how did i miss that. thanks Dean!!
@fastford207
4 жыл бұрын
You can use that little module and some relays to make a super nice and compact switch panel for lets say a race car. Cause you could mount that thing we’re ever and just have a small little harness run wherever needed. Would be super clean
@jbmjbm323
7 ай бұрын
Nice video regarding amp pop and why it happens plus the ussage of that TR-12 by PAC.
@kirkabrahamson1148
4 жыл бұрын
More great info from the masters of car audio
@jamessykes9597
3 жыл бұрын
Thanks for the great information. I'll let you know how mine works once I get it setup.
@bboyM4rk0
4 жыл бұрын
Great video! Can you do maybe a video about alternator whine?
@bboyM4rk0
4 жыл бұрын
@Mark Harrison hmm, interesting!
@DJLOW305
2 жыл бұрын
Thanks for the info, but where can I buy one? I can’t find it no where… 🤷🏽♂️
@timothypalacios9304
4 жыл бұрын
Thank you for the info. This device work for a pop when it turns on and pops when it turns off, correct? I have a after market head unit, a Rockford signal processor and a 5 channel amp going to 4 components sets and one 12" sub. Honestly I haven't been able to just enjoy it since adding the processor. I feel the processor and amp are turning on and of at different times. Thanks in advance for your help.
@jb4241
2 жыл бұрын
Question What if the pop sound only happens when turning off the stereo ?
@hemiracetruck6656
Жыл бұрын
Did you ever find a solution to this?
@otisbush4492
2 жыл бұрын
Will pac volt 39 do the same thing I have popping and turn off thump in my system all after market in 2003 yukon
@scottwheeler2494
4 жыл бұрын
I am looking to see if you have done an install on my car, a 2013 Toyota Camry with LCD screen but no premium radio. Ever thought about either doing a database on your show content OR having a hardcore fan build a website for such a database. Your usual show titles does not give enough detail for a search to work with rare exceptions. BTW, love the show. Rabbits everywhere I look. Did this back in the 80's - wouldn't dream of trying it today- or hell even DIYing my own car.
@FiveStarCarStereoInc
4 жыл бұрын
Yes we have done them no there is not a video that I can remember. We use the pac-audio kit for that one.
@daviancampbell3687
4 жыл бұрын
I have a kicker front row Digital signal processor an every time I turn off the car it makes the speakers 🔊🔊 make a loud pop .. so thank you 🙏 for this product
@RICKY-LSX
Жыл бұрын
Does it work as well for when the car turns off mines does a loud pop when I turn it off
@chaos4197
4 жыл бұрын
Great info, thanks for posting
@demitridean1306
3 жыл бұрын
Where can i find this piece for the turn on pop? Everywhere online is out os stock. Thank you
@michaelshedd2286
4 жыл бұрын
One can also get a timed relay board from amazon or ebay for a all of 5 to 10 bucks
@sandhu317
Жыл бұрын
Hello there. I recently installed aftermarket speakers and amp. Now when I turn off my car after few seconds there's a pop. I've been looking into tr7. How do I wire this into my unit. I have pioneer 1500nex, kicker component speakers and pioneer gm-dx874 amp. Please advise. TIA.
@infidel24
4 жыл бұрын
What about turn off pop?
@maness2112
3 жыл бұрын
Watch the video
@BusyBeeInspector
2 жыл бұрын
Same thing in reverse
@anthonydavidson1637
Жыл бұрын
Hello from Australia. Have wired in a Pioneer TS-WX130da underseat subwoofer in a 2022 Hyundai Tucson (non amplified) using speaker wire inputs (remote wire not used as per manual). Currently have slight ignition pop on start up only, accessories position is fine. Would the voltages of speaker signal possibly too high? The earth is to bare metal. Next I'm using a Stinger t-harness (CPTHY01) to intergrate a Pioneer GM-D0004 brick amp to power some new upgraded Infinity speakers. All these products seem to be based around delayed remote turn on signals...
@theinventionshow
4 жыл бұрын
I need some help!I own a tarams ds 160x2 that, I connected to my radio(Pioneer dmh g220bt),but when I tried to connect the Bluetooth the radio couldn't function and the speakers started making wierd noises like popping.
@wazid0122
4 жыл бұрын
all i can say thank you thank you thank you
@25hztolife86
4 жыл бұрын
A toggle switch from eBay does the same thing and it costs much less. It's manual....turn on the deck then the amp with the toggle switch.
@FiveStarCarStereoInc
4 жыл бұрын
True, however automatic is a tad nicer
@stevenon5664
4 жыл бұрын
@@FiveStarCarStereoInc I use these: www.ebay.com/itm/Omron-Delay-On-Timer-Time-Relay-0-5-10sec-2-Pole-12VDC-H3Y-2-w-Socket-E20A/252117830031?epid=141004979&hash=item3ab364c98f:g:m8QAAOSwlpZaXMxI You can get them with longer time delays: Basic part is Omron H3Y-2. Just make sure the Voltage is right. PS: I love the LED's on them.
@MaestrroMusic
4 жыл бұрын
Thanks sooo much for this fellas!!!
@Stedy19
3 жыл бұрын
Why the pink wire only output 9v vs the blue, white and orange wires output 13.8v?
@joshlee8430
3 жыл бұрын
I just installed a Maestro RR2 with a Pioneer DEH4660. Kept the stock amp... are there any settings on the RR2 that would prevent turn on pop? If not, could I still use the TR12 in line with the RR2?
@MrTimdtoolman1
4 жыл бұрын
Keep up the great work guys.
@FiveStarCarStereoInc
4 жыл бұрын
What’s up Tim
@danielharper7511
2 жыл бұрын
That part has been disconnected is there a new part number
@lg3822
4 жыл бұрын
I have a pop/boom when I start the car when the system is already powered up. If I am quick enough at starting the car it won't do it but if I hesitate at all and give the stereo time to come on before I actually crank the car it's a very loud pop. What can eliminate this?
@braceyourselvesfortruth2492
2 жыл бұрын
You might be able to use the inverter to send a "turn off" signal to your amp for a couple seconds, or less if you can tune it specifically to your specific set up. Any particular reason you power up your system before starting the car?
@kenh733
2 жыл бұрын
I installed a powered sub in my ford fiesta, im using the factory head unit that dont have RCAs, my powered sub only has high level inputs, its a cheap Dual brand, it sounds good even when I start the engine, but as soon as I take off the auto door locks lock and the sub has a real loud hum, like feedback, its not engine whine at all its just a low loud hum, so when I open the door it stops, when I push the door lock button it goes back to loud hum, push again hum goes away, I am stumped on this one. anyone heard of this?
@ROBBG88
3 жыл бұрын
Mines doing a little pop thru sub at turn off how do I fix it easy
@NoodlEyeJoe
3 жыл бұрын
Does the TR7 function the same as the TR12? I can't seem to find the TR12 anywhere.
@DIYAudioGuy
4 жыл бұрын
Can and I configure it to do both a delayed turn on and a delayed turn off?
@FiveStarCarStereoInc
4 жыл бұрын
Yes that was the last part of the video
@Djmambo77
3 жыл бұрын
The TR12 is nowhere to be found. Can it be done with the tr7? Or tr4?
@mikeunivers
4 жыл бұрын
nice really cool device
@carlosmanuelgonzalez310
2 жыл бұрын
If you use that on a tube guitar amplifier you will blow your Output transformer! ... I guess this works only with integrated circuit amplifiers
@Cathul
4 жыл бұрын
If just using this to get rid of a turn on pop you could also just use the TR4, is that correct? At least that's how i understood your video where you showed the TR4. Say in my Mustang, the audio enable is a 6V output which is not enough to turn on my Mosconi D2 100.4 DSP amplifier, then i could just get a TR4, attach it to 12V/Ground and the 6V audio enable and my aftermarket amps would behave just like the stock amp, is that correct?
@FiveStarCarStereoInc
4 жыл бұрын
The tr4 has turn on but no delay. I was showing that they both can make a turn on using 6 volt dc offset
@Cathul
4 жыл бұрын
@@FiveStarCarStereoInc Really? Thought the TR4 has a 1-second delay according to their website. :( Anyway, i would have to to splice in into the 2nd adapter behind the ACM for this anyway as Ford in all their wisdom decided to move the Audio Enable 6V line from the first connector where all the signal lines are to the second connector for European Mustangs. :( And i don't really want to splice in into the factory cables tbh...
@kennethcroll6972
4 жыл бұрын
i have diesel car and use a 555 Timer Switch 12V Relay to delay the stereo from turning on for 10 sec, as i start the car, stops the stereo getting a power surge
@FiveStarCarStereoInc
4 жыл бұрын
Same basic idea
@kennethcroll6972
4 жыл бұрын
true, cant get the pac tr12 in uk without pay real high P&P price sometimes is as much as double :{
@mauricedancy4343
10 ай бұрын
God bless you
@pathaha4870
3 жыл бұрын
bro you guys saved my life
@greenrims555
4 жыл бұрын
I get a pop when I have the stereo on for about 15 seconds then I go to start the vehicle then it pops but with everything off then I start the vehicle right away no pop sound happens is this something I just have to live with
@hemiracetruck6656
Жыл бұрын
What about “turn-off” pop?
@Tenzen.
4 жыл бұрын
TR7 does the same thing but it's far more complicated. I wish I had gone with a TR12 before I bought a TR7 just for that reason alone. But you can get a TR7 for under $10.
@FiveStarCarStereoInc
4 жыл бұрын
Yes it works the same. We used a ton of those back in the day.
@chirag88in
3 жыл бұрын
I have a 8 inch sub with built in class d amp . .. Sub is playing even after music is off....
@alextorres7835
Жыл бұрын
Does it also fix my loud static sound in the speakers
@FiveStarCarStereoInc
Жыл бұрын
My guess is no
@amitbh234
3 жыл бұрын
What do I do if I have turn off pop?
@hemiracetruck6656
Жыл бұрын
Did you find a solution to this?
@monosurge
4 жыл бұрын
We could also start teaching people electronics again. A simple RC network would do the same job for under a dollar.
@contratiger
2 жыл бұрын
Is it use for turn off pop?
@elizabethrose3667
3 жыл бұрын
My car started doing the pop when it was on for awhile. One pop. It’s just my regular radio.
@marioaguirre175
4 жыл бұрын
Does pop hurt your subs or speakers?
@FiveStarCarStereoInc
4 жыл бұрын
Not that I have ever see
@mrkongsimr
3 жыл бұрын
Why does this happen on a 2007 30k mile car ?? The same fix ?? Who can do it ?? Thank you I'm good for nothing , can hardly turn the car on .
@aftech7268
2 жыл бұрын
U dont need that the reason why u have a turn on pop is because of the remote wire going to the amp being 12volt need to reduce the voltage to 5-6 volt by using a resistor that solves the popping sound on turn on the fix only cost $5
@Ferris8228
3 жыл бұрын
I get a pop but only when I'm switching off my car. Any ideas?
@ROBBG88
3 жыл бұрын
Same here did u fix it ever
@Ferris8228
3 жыл бұрын
@@ROBBG88 yup. Mine wasn't bad. Turned the gain on my mono block down a bit. Besides the subwoofers are broken in. If u have pre amplifiers start with that, drop your gains and see if it helps. A proper ground helps as well
@thevitrectomee5275
Жыл бұрын
Does it go on the head unit, or the amp?
@sandhu317
Жыл бұрын
Hey did you get this fix? I'm wanting to know how to wire this for turn off pop.
@justinbrown961
Жыл бұрын
@@sandhu317 This is my other account. I found a way around it, but my problem was with turning on.
@Mchristopher91
3 жыл бұрын
I get a pop when i turn on car while in accessory mode (car in accessory mode ------>crank car on------>(PoP!)
@Mchristopher91
3 жыл бұрын
no pops when i turn car on. Only when after in accessory mode
@daviancampbell3687
4 жыл бұрын
I download the TR12 software but it’s a exe file an it’s not open up on my computer
@hilltop985
4 жыл бұрын
In my truck it pops when the truck turns off...
@FiveStarCarStereoInc
4 жыл бұрын
Most of the time you add a turn off delay of 10 to 20 seconds.
Пікірлер: 87