One thing that I noticed when you were putting the pipe on, you didn't take the restrictor out of the silencer of your pipe, that could help you a lot as well.
@squishydoggoo3971
Жыл бұрын
what we’ve all been waiting for! 😲😲😲
@codemaster3696
6 күн бұрын
A Big bore kit is not going to change the speed because it does not change the RPM of the motor it gives it more torque which will allow you to accelerate quicker. Any speed mod must be done during the transfer of power to the wheel. Unless you upgraded your ignition and possibly got a higher Red line.
@oliverbla
2 ай бұрын
This actually helps alot! tank you!
@johnjett1673
Жыл бұрын
Change out that white spring for a medium and tell me what you think. you have strong torque springs with a white soft spring.there supposed to match.
@MintWorxTv
Жыл бұрын
I have the clutch springs from Polini, and the white spring from them is the stiffest. Iv tried swapping every spring…
@pharoahkenun999
Ай бұрын
i heard heavy clutch weights will help top end
@j.0637
4 ай бұрын
Do you have both the restrictions out of the yasuni cause it has 2
@amyhazelvang7198
7 ай бұрын
What app are you using? Thanks
@captaincrunch93
3 ай бұрын
2008 bugeye ebay 70cc head and 88$ fly pig exhoust 49 mph stock variator and clutch doing full stage6 street race with crank waiting on yasuni r exhoust
@dilyn77
9 ай бұрын
throttle mod you should be hitting 60 plus . Seems like your not letting it open up all the way which is why your stuck in the 40s mph.
@awdlexus
10 ай бұрын
how much psi you put in your tires
@dilyn77
9 ай бұрын
weak !!! my 49cc goes 53mph with an exhaust and throttle mod and removing the governor - I weight 215 also
@Reds_Crabs
Жыл бұрын
What gram weights are you running?
@MintWorxTv
Жыл бұрын
6 gram seems to be good
@MintWorxTv
Жыл бұрын
I’m going to do the full throttle mod on the carb cam and tune from there so the rollers might change for me.
@WesPsWorld
Жыл бұрын
I’ve got the Yamaha C3 which is the same motor as the 4 stroke Zuma and stock weights for it is 6grams. All I’ve done to mine is put the Polini Hi-speed kit on it. It’s the variator, 4.9gram weights, and the blue contra spring and green tension springs for the clutch and that’s it. I haven’t done anything else to the bike, and I’m get 52mph out of it! It’s still a 50cc.
@charleymount582
3 ай бұрын
The things are showing it down. There's also a restrictor in the muffler. You need to take it out. There are videos of how on KZitem. Also, you need a bigger barn. I would suggest a 21mm DelOrto with a 92 main jet and cone air filter, and you need to raise the grading at the back wheel. Mine does 67mph and still pulls wheelies accidently of the line.
@edwinguevara2860
5 ай бұрын
Whath carburador you use
@dasheddevelopments6125
Жыл бұрын
Hmm i have a 50cc areox with leo vince tt and 4.5g weights doing 53mph. Summat wrong being a 70cc cdi restriction or fuel shortage like jets
@dilyn77
9 ай бұрын
It has to be that he didn't shave off the governor
@uconsaa
3 ай бұрын
my old scooter was bone stock but de restricted and did 50mph "2012 scarabeo piaggio"
@itsroads206
Жыл бұрын
Your parts list isn’t working, btw
@MintWorxTv
Жыл бұрын
The website is currently down. Sorry about that. If you email me at mintworxtv@gmail.com I can send you a parts list
@itsroads206
Жыл бұрын
@@MintWorxTv Dope! Thanks!
@freddistv2545
7 ай бұрын
its taking way too many rpms you sdhould get a new sports variator and put in some bigger rollers
@marksantaniello5247
Жыл бұрын
Without a bigger carb and gears your top speed won't be that good
@chrisapolinar1102
Жыл бұрын
Uuhhh.....if your only getting 46mph with a Good 70cc bbk , pipe and variator on a 08+ bugeye....something is very wrong. My 100% stock 50cc (full throttle mod done)09 bugeye would do 48mph..
@MintWorxTv
Жыл бұрын
Not sure what it could be. I have videos showing exactly what Iv done to the bike
@chrisapolinar1102
Жыл бұрын
@@MintWorxTv do you even have the full throttle mod done? Haven't seen you mention it yet in your videos.
@chrisapolinar1102
Жыл бұрын
@@MintWorxTv and did you take the 2nd restrictor out of the muffler? Yasuni's usually have two.
@MintWorxTv
Жыл бұрын
@@chrisapolinar1102 There was only one restrictor on the cylinder side. No restrictor on muffler side
Пікірлер: 38