Stock: Max Power=49.33 HP and 51.03 ft/lbs of torque. Modified: Max Power= 50.93 HP and 54.16 ft/lbs of torque. Total performance gain= +1.6 HP and 3 Ft/Lbs of torque. Comparing "averaged" numbers may share a wider gain in power, but comparing peak numbers shows the engines true potential. $400 Dynojet Power Vision Tuner $60 K&N Filter $900 Gallop Exhaust $1360 total performance cost not including labor No disrespect intended, but this is a rather expensive upgrade for such a low hp return. If your wanting a louder exhaust and improved looks, I agree your goal has been met. Sadly, any perceived performance gains are likely due to a perception of power based on the increased noise your hearing. I cannot help but to wonder if a 1250cc Bolt On Big Bore kit from Hammer Performance wouldnt be a better bang for the buck. These kits start at $750 and dyno results often show a 30hp gain.
@KennyQuestShow
10 ай бұрын
Thanks for putting in the time to break it down. I look at this stage 1 as the pre cursor to the next step that will include the hammer kit, I would need the dynojet and the K&N for that upgrade. Keep in mind I chose the gallop because it installs above my brake pedal almost every other exhaust out there at the time of the install sweeps below the brake pedal. So money invested is an important factor but this project isn’t over so I can’t report on the ROI just yet, but I’m happy with the stage 1 results and looking forward to the engine displacement mod and its results. Thanks again for commenting!
@mrmatt7210
10 ай бұрын
@@KennyQuestShow Keep us updated.
@thomasauslander3757
6 ай бұрын
Just enjoy for what the engineers design it to be and Change the Oil.
@Josh-pk4dv
3 ай бұрын
@@thomasauslander3757 the entirety of automotive culture would be so blatantly dull if everyone had your mindset…
@thomasauslander3757
3 ай бұрын
@@Josh-pk4dv that's very true.. when it comes to the vehicle's Second Life.. it accumulates awards for being original as it rolled off the assembly line..
@TheMotoJawn
Жыл бұрын
Nice! Love dyno number videos don't get to see them on sportys that often, I'm always curious what they're making
@KennyQuestShow
Жыл бұрын
Thanks! and you’re correct I haven’t seen any either so glad I was able to get those runs in.
@brandonmacon3317
6 ай бұрын
Now they've improved the slip-on with spring's 👍
@KennyQuestShow
6 ай бұрын
Cool!
@1RaceLifestyle
Жыл бұрын
Stage 1 will be My next upgrade on the 48. Another 🔥🔥🔥 video my friend!
@KennyQuestShow
Жыл бұрын
That’s awesome news! Thanks for watching! Ride soon???
@1RaceLifestyle
Жыл бұрын
@@KennyQuestShow yessir
@joracer1
Жыл бұрын
I wouldn't mount the exhaust to the frame with the engine moving around in the rubber mounts, and the exhaust mounted to the frame, you'd put a tremendous amount of strain on exhaust studs.
@KennyQuestShow
Жыл бұрын
Great advice and we didn’t. No issues of stress or fractures at the collector or intake.
@craigpennington1251
Жыл бұрын
You can mount it to the frame if it's spring loaded. It will all move in unison but will also be supported.
@KennyQuestShow
Жыл бұрын
@@craigpennington1251 I asked Pedro about that and he cited Bissani’s he’s seen where it breaks off at the manifold. Happy to report after a year it has not moved
@tonyheymunkets
7 ай бұрын
I'm seeing this a year later it's really weird until this day I've never seen you on the Internet I looked up some things on my sports store and you popped up. Just subscribe to your channel I hope you're still here i'll find out later thanks for the info your bike looks awesome I also have an iron 883 I love it
@KennyQuestShow
7 ай бұрын
I’m still here and so is my Iron 883! New episode each week. Thank you for subscribing! Welcome :)
@tonyheymunkets
7 ай бұрын
So cool I bought my iron 2018 brand new we've been through a lot so many people give up on the sportster I love it sure it'd be nice to be able to have two or three different bikes but I bought my iron coz I just loved it and I still do appreciate your info@@KennyQuestShow
@dylanr13
3 ай бұрын
That air filter is better than stock but you really want to get rid of that factory air box they generate more heat.
@KennyQuestShow
3 ай бұрын
I like the look of it, but realize there are better options.
@dylanr13
3 ай бұрын
@@KennyQuestShow The look is nice I agree.
@austinhylton6650
Жыл бұрын
That's cool asf man thats like 5 mins from my house and I go to the bike night every Thursday.
@KennyQuestShow
Жыл бұрын
That’s awesome man! If you see me, be sure to say hey
@austinhylton6650
Жыл бұрын
@@KennyQuestShow will do brother
@waydel1
10 ай бұрын
Greyghost 1423 is right you do not need a tune on M8 if your just changing exhaust and or air cleaner. The M8s unlike twin cams do not run as lean from factory. The EC on M8s has about a 10% gap that will adjust to exhaust flow in creased breathing from ac. That being said, you would see some improvements , like throttle response and peak torque. I had an FP4 flash tuner, and recently set it back to stock configuration, and I couldn’t see a difference. Save your money on the dyno until you really need it when change cams
@KennyQuestShow
10 ай бұрын
All the new tuners coming out that we’ve seen are limited to stock configuration or slip on with high flow intake. I’m told HD bikes that ship with a high flow exhaust are ready for slip ons without a map. I agree unless your doing engine work no need for a tuner, in my case on this bike the stage 1 is a precursor for a stage 4.
@skittlesmcdittles
Жыл бұрын
She sounds amazing!
@KennyQuestShow
Жыл бұрын
Thank you! I love it’s sound
@Geoff-s7p
Ай бұрын
Great colour to your bike love it
@KennyQuestShow
Ай бұрын
Thank you, Snake Venom.
@ASMRrides
Жыл бұрын
That exhaust looks, killer!
@KennyQuestShow
Жыл бұрын
Doesn’t it tho’ 😀 very impressed
@TheeLooseJuice
Жыл бұрын
Awesome Kenny! Hope you get the Dynojet tuning figured out
@KennyQuestShow
Жыл бұрын
Thanks! We certainly did, full review coming.
@gentlemangator4489
Жыл бұрын
Awesome looking and sounding exhaust
@KennyQuestShow
Жыл бұрын
Thanks!
@miporsche
8 ай бұрын
Good video! I did similar to an old Chevy when I was young, so I get the desire. But I was just chasing numbers for no reason. Personally, I feel the change was no improvement. You are still riding the same bike on the same streets at the same speeds. I fail to see how increasing the peak HP changes anything. Unless, you’re racing.
@KennyQuestShow
8 ай бұрын
Thank you and Fair point. Since I have a big twin EVO to compare it too, where I see the sporty benefiting me with more engine displacement and consequently more HP is on the interstate highway. We’ll find out soon if that theory holds.
@Mr.A.1776
3 ай бұрын
Heeyyy am in Orlando too with a stage 1 883. Let’s ride sometime!
@KennyQuestShow
2 ай бұрын
Awesome let’s do it! DM me on IG
@adejames88
11 ай бұрын
That was a useful video to me as I now know not to go and spend lots of money to get 1 hp more
@KennyQuestShow
11 ай бұрын
😂🤣😂
@skool_skool
Жыл бұрын
Hey brotha! Killer fu**ing video! If you dont mind me asking, but how much approx did Stage 1 cost you? Are you planning on going up to Stage 4 on that bad boy??!!
@KennyQuestShow
Жыл бұрын
Thanks man! It cost about $1400 installed plus $90 for both dyno runs
@odinisgod4577
Жыл бұрын
you earned my trust !! and subscription!!
@KennyQuestShow
Жыл бұрын
Thank you Tyler, welcome to the show!
@redlineracingg
6 ай бұрын
No offence but calling it Stage 1 with 1,5 hp gain (at $1400...) is an overstatement of the year. I love the exhaust tho, looks and sounds amazing!
@KennyQuestShow
6 ай бұрын
I don’t know what else to call it. It’s still a stage one, right? Yeah slip on’s and no tune would have been cheaper for sure. At least I didn’t purchase a Thundermax tuner to add insult to the financial injury.
@redlineracingg
6 ай бұрын
No worries ;) im checking every Iron 883 vid on youtube as I wanna get one this year ;) love it
@jamesdean4071
Жыл бұрын
Yeah, K&N filters aren't a compound they are oiled cotton gauze, but yes they are superior if maintained properly. They give the best performance when new/clean and start to drop off performance once they collect dirt.
@KennyQuestShow
Жыл бұрын
I’ll keep an eye it. My expectations are that it will need to be cleaned every 3k miles.
@Phillzillaa
Жыл бұрын
Great video man 🤘🤘🤘
@KennyQuestShow
Жыл бұрын
Thanks Phil 👍🏼
@rprovasoli
Жыл бұрын
Get the high flow air box.. the stock air cleaner box is very restricted. My 08 883c had it, Rinehart slip on and a dyno tune. 59 or 61 horsepower.
@KennyQuestShow
Жыл бұрын
Thanks! Planning on it along with the 1250/75 kit install
@noahrangel9107
11 ай бұрын
Cleanest exhaust I’ve ever seen🔥🔥
@KennyQuestShow
11 ай бұрын
Thank you!
@CWRonnie
Жыл бұрын
Love the hat my dude, where do i get it? 🤠
@KennyQuestShow
Жыл бұрын
On Etsy 🤠
@brandonmacon3317
6 ай бұрын
They got a bump after Red Fox bagger's went with them over another more expensive company that never answers emails.
@KennyQuestShow
6 ай бұрын
Good, Gallop deserves to have vendors out there!
@brandonmacon3317
6 ай бұрын
@@KennyQuestShow definitely. They stay in touch with their customers for sure. I could text em now and they'd respond 👍
@octaviolourenco4797
Жыл бұрын
Portugal flag , big shout from Portugal.
@KennyQuestShow
Жыл бұрын
Yep! Pedro @wanderermoto is from Portugal
@HunterWills-o3u
Жыл бұрын
I have a Vance and Hines Fuelpak FP3 and it has everything auto tune and all
@KennyQuestShow
Жыл бұрын
Very cool.
@dqgrillchillbrimfield2344
Жыл бұрын
Good video Kenny I do have a question what seat do you have on the there ?
@KennyQuestShow
Жыл бұрын
Thanks! The seat is a Saddlemen Renegade
@KennyQuestShow
Жыл бұрын
I made a video about it : How To: Harley Seat Install for Sportsters (Saddlemen Renegade) kzitem.info/news/bejne/24GwtnuFh5Z_jII
@Woife1612
Жыл бұрын
Hi Kenny, and how fast is your Harley-Davidson Sportster Iron 883 now after the conversion and how fast was it before? I ride the same 2017 Sportster Iron 883, live in Germany with no speed limit on some areas of the autobahns and have never tried it as it is too uncomfortable for me. So how fast does your crate run, in MpH or Km/hr? Dear biker greetings from Munich, Bavaria Woife the biker
@KennyQuestShow
Жыл бұрын
Hi Wolfe! Thanks for watching. It’s runs MpH, in fifth gear without hitting redline I’ve gone 101mph before I lost my nerve and slowed down
@MrCyberious
11 ай бұрын
Dude, who is the mechanic? I live near you and want to get a quote to install a Hammer I have coming.
@KennyQuestShow
11 ай бұрын
Links in the description to Wanderer Customs, tell ‘em Kenny Quest sent ya!
@Genod3500
Жыл бұрын
only a few hp increase? weird my lil sporty makes like 75 or 80 after a stage 1 I run short shots (no baffles) and a k and n ram intake. its a 07' 1200c with a first gen fuelpak... I hear older tuners dont have to deal with EPA so they Just dump fuel. but it could also be your filter. still tho super cool video. love that note it makes
@KennyQuestShow
Жыл бұрын
Your 1200 making 75/80 is typical and much better than my 883. Hoping to see 90-95 after I drop the 1250 S&S kit in it. Stay tuned!
@Genod3500
Жыл бұрын
@@KennyQuestShow fair I would have expected like low to mid 60s by Maybe I just underestimated how much bigger a 1200 is from 883 and adding older tuners just dumped fuel into these motors.
@KennyQuestShow
Жыл бұрын
@@Genod3500 yeah it’s like 40% more power for a 1200 over the 883
@JamesMiller-q9w
Жыл бұрын
Stock Sportster has plenty of Torque and Power. What it lacks is Brakes. The single front brake is total crap. Should have duals with multi piston Brembo's. If you ride very long you are going to need good Brakes more than speed on a Motocycle! And after Brake Mods don't need to Dyno it.....
@KennyQuestShow
Жыл бұрын
Great point. They’ve offered dual discs on 883’s in the past. I’d argue though that an 883 doesn’t need dual discs and I feel that I have good stopping power, IMO. I’d suggest ABS as standard to be more useful to a newer rider and the new Nightster has ABS available.
@JamesMiller-q9w
Жыл бұрын
Don't want sensors messing with my brakes. Hope you don't have to use that great Sportster stopping power when that left turner on a cell phone crosses your path like happened to me....@@KennyQuestShow
@KennyQuestShow
Жыл бұрын
@@JamesMiller-q9w I’m sorry that you experienced that.
@feloniousmonk3049
Жыл бұрын
Semi metallic pads or full metallic pads will definitely increase your stopping distance over organic pads. They don't like to get wet, however.
@JamesMiller-q9w
Жыл бұрын
Right Bro...Have them,,, also Arlen Ness makes a big brake for real late Sportsters not my 97 model. Everybody goes for speed but after 56 years of ridding I can guarantee you it's BRAKES you are going to need way before SPEED!! Old Timer with all my limbs still..... @@feloniousmonk3049
@17ShanDs
Жыл бұрын
Shouldn't it be an open intake to complete the stage 1. Is it ok with the factory cover?
@KennyQuestShow
Жыл бұрын
I was told this air cover has a large enough intake to satisfy the air demand and the post stage 1 dyno result corroborated this. I liked the look so I kept it. Since then I decided to save for a Trask Performance air box.
@17ShanDs
Жыл бұрын
@@KennyQuestShow I think I will also do the same. I've seen riders deleting the cover that comes behind the air box cover. Your thoughts on this? Let me know. Loved your video bro. Very informative. Keep doing the same 🍻
@KennyQuestShow
Жыл бұрын
@@17ShanDs if it brings in more air it’s a good thing. Just flash your ECU with your tuner so it calculates the proper mixture otherwise your ECU Won’t notice any difference in calculating the air / fuel mixture
@NicholasKaye
Ай бұрын
Are you guys from florida what part orlando?
@KennyQuestShow
Ай бұрын
Yes. Lockhart & Apopka
@JurandirJunyor
Жыл бұрын
what the model exaust ?
@KennyQuestShow
Жыл бұрын
Gallop Flying Comet
@tonyheymunkets
7 ай бұрын
I just run Vance and Hines slip ons I wanted a better sound but I didn't want to pay for the tuning it seems to help with the speed a bit not sure but the sound is phenomenally better I was curious if I could get that air filter the K and N air filter and run with my slip ons without having to do the tune
@KennyQuestShow
7 ай бұрын
You are safe to run the K&N more safe without a tune than the slip ons actually, overall you’re fine. My tune with the FP4 did very minimal adjustment. If your ticking and popping down the street or your fuel economy changes that’s when you pause and get a tune but a CARB compliant slip on will run on a stock tune.
@tonyheymunkets
7 ай бұрын
thanks brother I need to change my air filter I thought that would be a good option for now I want a super sucker but the cost of that in the tune is ridiculous@@KennyQuestShow
@KennyQuestShow
7 ай бұрын
@@tonyheymunketsThat’s exactly why I did what I did. It doesn’t need more airflow until I drop that 1250 kit in there
@700horses
Жыл бұрын
K&N filters are trash… That oil goes into your intake and gums things up.
@KennyQuestShow
Жыл бұрын
Good to know. Any alternative recommendations?
@bgomusicco
Жыл бұрын
This is false. At one point, over oiled filters would cause issues with in-line MAF sensors on vehicles. When maintained correctly, they air actually superior in flow and cleaning ability. Hell, harley vents oil into its intakes from the factory.
@700horses
Жыл бұрын
@@bgomusicco The recirculated air back into the intake is required by the EPA/DMV due to environmental protections (not because of performance) and ultimately causes carbon build up on the pistons. And I’ve only heard of oiled filters causing issues for MAFS and coating intakes with oil.
@danielherber9710
Жыл бұрын
Great motorcycle. I enjoyed the video.
@KennyQuestShow
Жыл бұрын
Thank you! Appreciate you watching.
@dagenmoreland3777
Жыл бұрын
Dont need any of that map shit. Run just fine with a stage 1
@KennyQuestShow
Жыл бұрын
In my case with this 883, perhaps not.
@revknives
8 ай бұрын
Hello from Spain! Where can i buy a sissy bar like yours? Thank you!
@KennyQuestShow
8 ай бұрын
Hello! You can find it here: tinyurl.com/QuestSissyBar
@revknives
8 ай бұрын
@@KennyQuestShow Thank you sir!
@jerseyjoe82364
2 ай бұрын
Nice looking exhaust, but for me it's not throaty enough....it's too brappy.
@KennyQuestShow
2 ай бұрын
Thanks! Sportsters rev higher than a big twin, which can increase brappiness. Though at speed it sounds awesome, throaty. But Vance and Hines makes an exhaust called the mini grenades, less brap with them at idle on a sportster in my opinion
@lenphil9875
Ай бұрын
How a overweight lump that can't even produce 50 HP can be called sportster, has got me. Snailster maybe. There are 400cc metrics that run rings around this boat anchor.
@KennyQuestShow
Ай бұрын
True. But who wants a single cylinder thumper for an exhaust note (Truimph) or the ergos or looks of a L-twin (Kawasaki) the sportster is its own universe. The sound, feel and looks are its own. Apples and Oranges. Many sportster owners, myself included own other bikes
@lenphil9875
Ай бұрын
@@KennyQuestShow Singles are for dirt bikes. You like your bike, great. But the power to weight, handling and breaking would drive me nuts and I would never sacrifice this for the sound. Actually I hate the potato sound but I know many love it. Each to their own.
@KennyQuestShow
Ай бұрын
@@lenphil9875 exactly. I like the sound of a triple and a 4 when I’m on them. I like bike, but I’m a proponent that each bike style can stand on its own merits.
@KennyQuestShow
6 ай бұрын
I love mine. Always fun to ride. Did you see this one? Evolution of the Iron 883 kzitem.info/news/bejne/t35_q2qoont4fo4
@nbowling10trio
5 ай бұрын
Hammer1275
@KennyQuestShow
5 ай бұрын
👍🏼
@consertina82
Жыл бұрын
He Portugues
@KennyQuestShow
Жыл бұрын
Yes he is. 👍🏼
@bryansullivan9588
9 ай бұрын
that small gain wasnt worth the money
@KennyQuestShow
9 ай бұрын
If that was the end game, agreed. The end game is a stage 4, 1275ci. You have to do the stage 1 first.
@bryansullivan9588
9 ай бұрын
@@KennyQuestShow then just buy a 1200 and then dont gotta spend more money on it
@bryansullivan9588
9 ай бұрын
just buy a 1200 and start from there lol wow
@KennyQuestShow
9 ай бұрын
@@bryansullivan9588this is my first bike, that ship sailed, that said the 1200 is a different style. That said why bother with sportsters, trick out a low rider S. Dude there’s no logic or reason to any of this, that shit don’t matter.
@caduhoffmann
Жыл бұрын
nice anime gloves btch 😂
@KennyQuestShow
Жыл бұрын
You talking ‘bout my prison break wrecking crew gloves? 😜
@caduhoffmann
Жыл бұрын
😅😅😅@@KennyQuestShow
@Victor-w4b8d
3 ай бұрын
In my opinion these bikes are junk
@KennyQuestShow
3 ай бұрын
Sportster’s? Or Harley’s in general?
@Victor-w4b8d
3 ай бұрын
Harley Davidson in general
@jaywinters2483
10 ай бұрын
After the mechanic took the Lord's name in vain, I exited out. "Thou shalt not take the name of the LORD thy God in vain: for the LORD will not hold him guiltless who takth His name in vain".
@KennyQuestShow
10 ай бұрын
Apologies.
@croaero
9 ай бұрын
The only sin here is calling himself a mechanic and using a Ryobi. In all seriousness- you should learn your religion a little better. Using the word ‘god’ has nothing to do with any religious law. ‘God’ is a title, not a name. And it says name… not title.
@really3422
9 ай бұрын
God Or Cloud Unicorn
@MaaZeus
7 ай бұрын
@@croaero Indeed. God is a title or a rank, not a name. If bible is what you read then the name you are looking for is Jah, Yahweh or Jehovah depending on which translation/form you prefer but they all mean the same thing anyway. A name you are allowed to (and should) use but not be disrespectful to it, which the verse you were talking about actually means. The word god without context of whom is being talked about means nothing, it could refer to the omnipotent but for all we know it could refer to any being people may consider to be a god, hell even the devil. Or it may not mean anything or anyone and is just an expletive.
@impeccablebybirth
5 ай бұрын
Also, no one cares if you left
@thelevelrider64
Жыл бұрын
Gotta admit, I'm really pretty shocked Dyno-Jet would put a new tuner on the market with such limited application. That really makes that unit NOT such a great deal after all. To me, that's just plain incomplete, and honestly shouldn't even be released yet. Maybe if you go over and see @sickwideglide over at Blockhead Garage, he might be able to work up a custom map for that setup. Being a small-shop custom full exhaust, that might end up being your only real option for true best results. That exhaust looks way cool, though.
@KennyQuestShow
Жыл бұрын
Yeah we we’re really disappointed with the Powervision 4’s offerings. I have a more in depth video coming out on the DynoJet PV4 and what we ended up doing in regards to a permanent tune. That’s for the compliment on the look, it came out awesome!
Пікірлер: 145