Stoked for the next iteration with a bigger wing when you take off and fly!
@elimaki4833
Жыл бұрын
Nice
@Toxikyle1
Жыл бұрын
Maybe try bouncing to change the height like they do on the normal ones
@zotfidjyfidjy3276
Жыл бұрын
Great! Bigger wings make lift easy, and at low speeds.
@kjngmax
Жыл бұрын
How do you coat the foam board. My foam board was burned when i glassing with PU glue
@rbmwiv
Жыл бұрын
More power
@spartansoff-roadrecovery5058
Жыл бұрын
Still cool
@lindz151074
Жыл бұрын
Stand further back.
@ivanzhytkevich8903
Жыл бұрын
You finally posted: )
@zacharysprunt3398
3 ай бұрын
That foil looks tiny. It looks similar sized to the highest performance race kite foils. For an Efoil you’ll want to go much bigger
@TULSUNDUR
Жыл бұрын
its FIASCO!!! hydrofoil not need in this board!!!
@TheZantiago2000
Жыл бұрын
Awesome project man 🤟
@sanjuanfishing196
Жыл бұрын
In America we call it fiberglass
@christinaehrlichman4254
Жыл бұрын
That wasn’t in 60 seconds that would take like 60 hours
@The_Bored_Farmer
Жыл бұрын
But he explained it in 60 seconds
@danieldude15
Жыл бұрын
Dude!!! Your smart and funny and create great content! Keep it up!!!🎉
@artyomedition
29 күн бұрын
If you use it just as a surfboard, will battery last longer than you diy surf?
@BellyUpFishGarage
11 ай бұрын
Would you be willing to share the files?
@jmocrawls
Жыл бұрын
I love it man. Please cover the propeller with cage for your safety. For in case you fall from the height you will reach. 👍
@WillInWestPalm
11 ай бұрын
You built an electric hydrofoil in 60 seconds?!?!
@Nate_cv
Жыл бұрын
You probably know this but put a wider wing on it. That should solve the problem
@MrChemStuff
3 ай бұрын
What wrong? You didn’t wana spend over ten thousand dollars on a commercial one lol?
@CemBas
Жыл бұрын
You definitely need bigger wings 👍👏👏👏
@johnnybenoit841
Жыл бұрын
What filament did you use for strength?
@morgulusthetrollslayer6672
3 ай бұрын
Great project, poor realization. You definitely need a lot bigger hydrofoil than you have. And this board seems like it needs some reinforcement too, like placing some solid plate over mast attachment point and under your foots' positions
@CWlm
4 ай бұрын
You were faaaaar too the front ! Rear foot over the mast !!!
@safiyasafa5354
Жыл бұрын
Always great content/ Projects
@ErroneousBox
Жыл бұрын
No way Could you do all that in 60 seconds
@owurabaako7371
Жыл бұрын
Perfect job bro. you are genius
@Crunch_dGH
Жыл бұрын
Lifelong surfer loves this!
@chip4121
Жыл бұрын
That did not take 60 seconds
@bojiggles2578
Жыл бұрын
Catch a actually wave my dude
@FatherWaffle
15 күн бұрын
That foil is WAY to small
@charles-andrelefebvre1154
2 ай бұрын
Which motor did you use?
@yongyea4147
7 күн бұрын
So how did you build it?
@Djanguitooooo
Жыл бұрын
How to not paint a board :
@bojiggles2578
Жыл бұрын
No one cares
@jimtheudb
Жыл бұрын
It looks like the board wanted to lift. Try standing back a bit to allow the front foil to get more lift and once you pop out of the water, friction will drop and you'll be off. If you've not foiled before, you need to trim the board with forwad/back weight shifts to go down/up. You could try pumping the board but I'm not sure it'd be strong enough.
@manuelve1998
Жыл бұрын
Post more of this! Job well done! You could easily sell this in a big box store, once you get it structured properly!
@jasonthomas4973
Жыл бұрын
Well done young man I think you are going places. 🙂👍🙏
@owurabaako7371
Жыл бұрын
Perfect job bro. you are genius
@Alkatross
5 ай бұрын
Can't wait to see you do it!
@letsmakeelectronics5432
Жыл бұрын
Nice work man
@pulaski1
Жыл бұрын
Poorly designed, too weak, broke, redesigned, still didn't work. What a waste of your time, and mine. ... Don't recommend this channel.
@OldmanCrypto100
Жыл бұрын
You didn't build a hydrofoil. You built a styrofoam slab
@quepasatim
Жыл бұрын
Stand on the back,, u cant say it wont lift if u standing on the front.
Пікірлер: 48