I have the same code , going to take the washer apart tomorrow hopefully I just have to clean the filter but now that I saw your video it’s more info that I didn’t know before 👍👍 Videos like these help a lot of people out there like me
@Joricano
9 ай бұрын
That’s what did first. Cleaned the filter. Checked the hoses.. hopefully it fixes your issue
@WestBuilt323
9 ай бұрын
Thanks for the reply , so my filter wasn’t clogged up so now I am going to try what you replaced lol hopefully that is my problem and not a bad pump
@theonlygrizz
6 ай бұрын
I replaced the control board, replaced the pressure switch, cleaned the trap, and cleaned the "air dome hose" and its attachment that you mention. Same codes remain. I'll purchase a whole new "air dome hose" and cross my fingers. Such a tiny hose for $40, what a rip off. Thanks for the tip; something else to try.
@bethsytsma8359
3 ай бұрын
Any updates on this?
@theonlygrizz
3 ай бұрын
@@bethsytsma8359 Being on a well, the specific issue I had was at the inlet of the cold water (where the cold water hose screws into the machine to provide water). The screen/orifice was clogged BIG TIME and the machine essentially sensed there was not enough water being supplied. I replaced that contraption (has both cold and hot inlets with some solenoids on top) and BOOM problem solved. I think it was $40 us on Amazon.
@bethsytsma8359
3 ай бұрын
@@theonlygrizz thank you, I appreciate it! I'll check that out as well.
@JakeLewisReal
2 ай бұрын
@@theonlygrizz do you have an amazon link or part number or part name i can find please?
@theonlygrizz
Ай бұрын
@@JakeLewisReal "Supplying Demand W10599356 W10509710 Front Load Clothes Washer Water Valve Replacement " Be sure it fits your washer model/brand. Look at the one you have now, it should have a part number sticker on it. Search for that, or by the title of the part above.
@theonlygrizz
4 ай бұрын
After allllll my 'fix' attempts, my issue was a clogged input; where the cold and hot enter the washer.
@ronaldmitchell7654
10 ай бұрын
Thank you!!! Resolved my issue without having to do anything else! Thank you!
@edwardman1742
3 ай бұрын
I hear you saying “this is my problem” and showing me an elbow, but what was actually wrong with it? Why was this the issue? How did it fail? Was it clogged, torn, leaking?
@2kviper877
Жыл бұрын
Exactly the info I was looking for. Thanks!
@Joricano
Жыл бұрын
You’re Welcome..hope this fixes your washer
@alexshowcase7288
Жыл бұрын
Hello... I'm having that exact same problem.... Thank you for the video... Was the part you replaced that black hose? The video was a bit dark.
@Joricano
Жыл бұрын
It’s called air dome trap. Amazon link below Supplying Demand W10903220... www.amazon.com/dp/B083C6VLG8?ref=ppx_pop_mob_ap_share
@i2aven420
8 ай бұрын
Thanks man. Seems like my clamps slipped off
@JJayJ
5 ай бұрын
You're a problem solver. Very helpful! Can you please post the part# and a link for it?
@Joricano
5 ай бұрын
Here’s the Amazon link Supplying Demand W10903220... www.amazon.com/dp/B083C6VLG8?ref=ppx_pop_mob_ap_share
@JJayJ
5 ай бұрын
@@Joricano Wow, that was fast! Thank you so much. Great video!
@JJayJ
5 ай бұрын
@@Joricano You might want to place the link in the video description.
@mikoloe
10 ай бұрын
What did you change? did you change the hose from the pressure switch to the tub? or just the fat hose at the tub?
@Joricano
10 ай бұрын
I changed the pressure sensor but it didn’t fix the issue. Then i changed the air dome trap and hose and that fixed the issue. I don’t think i needed to change the hose but it was cheap so i did. The part number of the air dome trap is in the comments below
@lindaditrapani6487
6 күн бұрын
What is the part number and name of the part PLEASE HELP!!
@Joricano
6 күн бұрын
@@lindaditrapani6487 It’s called air dome trap. Amazon link below Supplying Demand W10903220... www.amazon.com/dp/B083C6VLG8?ref=ppx_pop_mob_ap_share
@rockerac1
8 ай бұрын
Any idea of anything else to try? I’ve now replaced the pressure switch, the hose, and the air dome, cleaned the trap. And now getting the error code again still… don’t know what else to do.
@Joricano
8 ай бұрын
The air dome was my last try. Then i was gonna call the pros if that didn’t work.
@alexdavis7872
7 ай бұрын
Bad ccu board the. The big gray one on the top right under the panel
@Geo-oq7td
5 ай бұрын
I replaced both switch and bottom part. Still getting codes. Yes I cleaned trap
@Joricano
5 ай бұрын
I guess it’s time to call the pros. That was my next move if the airdrome didn’t fix my problem
@maltrek1
Ай бұрын
i have a maytag maxima steam front loading washer approximately 10 years old. throwing F03 and E01. cleaned the catch basin with no results. dropped the pump off the bottom (nothing in there) and proceeded to take the pressure line and waste discharge line off. cleaned the slime out of them and paid close attention to the air dome. once clean i reinstalled and then saw @theonlygrizz's post. i removed the cold water hook up to the machine and lo and behold it was 1/2 clogged with rust. i removed the filter screen and cleaned it well. reinstalled everything and plugged the machine back in. heard a weird grinding/spinning noise for 15 minutes and thought the whole thing was trashed. miraculously after that 15ish minutes it seemed to dial itself in and was able to run a load flawlessly. after a load today seems to be running okay. clothes smell fresher and feel cleaner. don't think this is a complete fix but if i have problems again i will most likely try changing the hot/cold water intakes first. ps all you have to do to check the cold water intake is unscrew your line from the machine
@desireehutcheon5044
11 ай бұрын
Thanks! This worked for us!!
@Joricano
11 ай бұрын
Awesome! I’m glad it worked out.
@clarisesandi5063
3 ай бұрын
Thank you very much
@mitchnn
Жыл бұрын
What was it called and part number#. Thanks.
@Joricano
Жыл бұрын
t’s called air dome trap. Amazon link below Supplying Demand W10903220... www.amazon.com/dp/B083C6VLG8?ref=ppx_pop_mob_ap_share
@JJayJ
5 ай бұрын
As far as updates go, has the washer been working fine since you changed this part?
@Joricano
5 ай бұрын
Been working ever since
@lawacesw06
8 ай бұрын
So what exactly did you replace ? Hose? Sensor? Or one way clear valve
@Joricano
8 ай бұрын
I replaced the sensor and hose and it didn’t fix the issue. What fixed the issue was when i replaced the air dome trap
@remegiosampayan1301
5 ай бұрын
How do i fix the f08 e4 code on the same washer
@farzaddehnavizadeh1959
6 ай бұрын
Thanks for sharing
@Joricano
6 ай бұрын
No problem. Hopefully it helped
@Woody05XAM
9 ай бұрын
I replaced the pressure switch and the air dome trap and am still getting the error. The machine was draining, and I took the drain hose of the drum to make sure it was empty and am still getting an error. Any other ideas on what might fix it?
@Joricano
9 ай бұрын
The air dome trap was my last resort. I was gonna call a service guy after if it didn’t fix it.
@WestBuilt323
9 ай бұрын
Maybe your pump is going bad
@jamesguralski5156
8 ай бұрын
@@WestBuilt323can you take some of the hoses apart on 1 side and blow air through them.. ?
Пікірлер: 48