Can we all agree that this man is really a treasure, well spoken and sharply dressed not to mention a fantastic shot
@The_Knight_Of_The_West
6 ай бұрын
Now i know we're all here for the revolvers but can we take a moment to apreciate this man's clothing and style? Hot damn you dress well Tuco, where might one find such clothing?
@timmynormand8082
6 ай бұрын
Ya right he one Cool Dude
@TUCOtheratt
6 ай бұрын
I've bought my clothing all over from Tombstone shops to western wear stores in Miles City MT
@timmynormand8082
6 ай бұрын
@@TUCOtheratt even some painter whites lol. I never liked wearing the painters pants. I always wore jeans.even when I worked for other contractors
@TUCOtheratt
6 ай бұрын
@@timmynormand8082 I used to wear whites back in the 80s but I wear jeans all the time now too. Whites are so uncomfortable.
@The_Knight_Of_The_West
6 ай бұрын
@@TUCOtheratt Though I am European, If I am ever in the area, I am sure to take a visit
@nicosogrecos
6 ай бұрын
Wow, the perfect man cave, Saddle horse, bench grinder, packed shelves, loads of revolvers. I would be living there in bliss. That's the life.
@donquixote2072
6 ай бұрын
I got my first 1873 two days ago! The GWII Californian 4 3/4". Not going to be fanning it or doing anything fancy like you, but I already love it all the same. There's a feeling that's so raw and involved with single actions that operating a modern firearm just can't capture.
@brianholthouse1426
6 ай бұрын
I bet it won't be your last single action. 🤠
@donquixote2072
6 ай бұрын
@@brianholthouse1426That's a safe bet. 👍
@brianpeterson5392
6 ай бұрын
Hi Tuco, thanks for all the videos. Since finding them about a months ago I made it a mission to catch up and try to watch them all. You've really inspired me. Up until a month ago I'd never even heard of a race gun. I just thought people like you who could like that were just very speacial people. Now I can't wait to get a race gun of my own and start learning to shoot like you. Really appreciate any advice you care to give. Thanks, Brian.
@TUCOtheratt
6 ай бұрын
Thanks for that nice comment! Glad you are enjoying my content! : )
@MilagroMadMan
6 ай бұрын
Thank you for your videos, I am joining a local club because of what you have accomplished.
@Squib1911
6 ай бұрын
Great story. Thanx for sharing. Bob Munden was amazing.
@sustorres765
28 күн бұрын
Great episode, thanks for sharing this. Superb!
@Saintlawrence100
6 ай бұрын
Thanks for the share!!…awesome story.
@TUCOtheratt
6 ай бұрын
Glad you enjoyed it!
@ironmonkey1512
6 ай бұрын
The ghosts of guns past. For all you young people if you have a nice gun never sell it, you will regret it for sure.
@jeffreyelliott622
6 ай бұрын
That's why I still cherish and have my Bob Munden Colt .45 SAA race gun but I want to retire handsomely in a few years and will look into auctioning the gun off on a high end reputable online auction site Rock Island Auctions out of Illinois !!
@steveshoemaker6347
12 күн бұрын
Thank you TUCO..... Old F-4 pilot Shoe🇺🇸
@miguelangelllopiscardo6883
6 ай бұрын
Encantado de ver uno de tus vídeos otra vez. Y disfrutando de esas joyas que tienes ahí delante. 👍
@dexter255
3 ай бұрын
I absolutely love the octagon barrels. Rifle and pistols.
@bretmavrick-ph2ip
6 ай бұрын
We appreciate your experience bru👍
@samduffy7628
5 ай бұрын
I just picked up my 1860 snub! Excited to get into it!
@larryleventhal1148
3 ай бұрын
Very interesting, the component of learning to gun smith, the machining and measuring and working with metal makes me more curious.
@MC-vk5by
5 ай бұрын
Watching your videos and being a huge fan of the old west (romanticized and not) I’ve started learning about gun smithing and race guns. Love your videos.
@CowboyFastDraw97
6 ай бұрын
Another great video man can't wait for the next video
@Taspens
6 ай бұрын
Appreciate you sharing the story. Looking forward to future vids!
@andrewsema359
6 ай бұрын
Thanks for the history and how you got into the guns to making your own mods. ❤
@garthg.6150
2 ай бұрын
Bob Munden did a show in our town around 1980. He advertised trigger jobs for S&Ws he would do in his hotel. He was pretty memorable.
@alexmiller880
6 ай бұрын
Big fan love the channel ... iv got a challenge for ya ... make a poor man's race gun out of a ruger wrangler if it can be done ??? I love my 45s and 38/357 but not everybody can afford them or feeding them lol ... besides you need a few more pistols lol p.s I'm glad somebody is carrying the torch in this niche I'm sure ol Bob's smiling
@davidcollins3097
6 ай бұрын
Very cool brother!!! Thanks for sharing your knowledge!
@sergefernandez5223
6 ай бұрын
Congratulation, appriciate a lot your vidéos and also this dicipline. From France
@TUCOtheratt
6 ай бұрын
Hello! Thank you very much!
@danielrichards4927
6 ай бұрын
Lived that one Tuco…very cool
@peterruiz6117
6 ай бұрын
Your favorite is my favorite..Polished gloss black is 'El Ultumato'
@JWheeler331
6 ай бұрын
Ahhh that ending. 😂 Interesting video. Like you, I once had a Bob Munden gun. Mine was a Ruger and that thing was great but I was young and ended up needing the money more than the gun at that time. Wish I still had it though.
@TUCOtheratt
6 ай бұрын
Wow! That's an interesting coincidence.
@jackbluehq6653
5 ай бұрын
It'd be interesting if you made a video showcasing all different types of quick draw techniques
@rulojoe4747
5 ай бұрын
Oh love the 1858 or ? Race conversion cylinder too . more so really
@chrisborona5063
6 ай бұрын
Very nice .. love it. I use mine for hunting. But I would like to get one set up to fan just for fun.
@talkingtimehorology
5 ай бұрын
I must say you did a very good job on the 1873 it is not an easy task, but my favorite is the 1851 there is nothing like opening up a part of history, i have done many myself and i know just how difficult it really is, we really were born in the wrong century.
@eardwaith6888
6 ай бұрын
A very good one again! I like your vids Sir, and the gunsmithing part of these BP revolvers. And I have to, because in my country, only these are legal to have. Greetings from Hungary. I managed to have an Uberti 1873, big dream to make it race gun.
@bushcraft_in_the_north
6 ай бұрын
They are meant too shot smokeless too
@zdravkostankov255
6 ай бұрын
Tuco❤ the first made walking single-action machine gun😊
@Curtislow2
6 ай бұрын
Tuco ,Dig your videos.I hope the website is a success. Being a novice to BP shooting the website is above my grade and price. At this stage of the game anyway. Knowledge is Power! Just a bit of feedback. Good Luck!
@James44789
5 ай бұрын
I picked up a single action intercontinental arms Armi jaeger Dakota in .45 colt from a pawnshop a few years back. Seems like a quality pistol, I guess Bob Munden would use the same model on occasion. Really don’t know much about them though!
@18-qn3rl
5 ай бұрын
The best cowboy was great
@henrysara7716
6 ай бұрын
Thank you Tuco.
@jaredrobinson7071
6 ай бұрын
I have myself a single action Frontier Pietta. I would love to learn how to work on it.
@Canadian-bandit
6 ай бұрын
I'm a big fan Bob munden wish i could shoot like he did too bad Canada has a handgun banned bill c 11 so probably will never be able to own a single action revolver and toco i enjoy watching your videos learn alot about revolvers from you.
@kernpetersen4901
6 ай бұрын
Sounds like one hell of a good reason to get out of Canada.
@michal.abramowicz
6 ай бұрын
😂 change your goverment for something better in Canada...
@Canadian-bandit
6 ай бұрын
@@michal.abramowicz I know us Canadian have a dipshit for a prime minister
@jmount7661
5 ай бұрын
Wow what a quick response. I am very interested in wear and tear, how do they hold up if shot a lot. Any vendor you would recommend to purchase from & do the tune up. I wish we lived closer I let you check out the one I have. I bought it on a whim. Now I don't want to buy a match and find out they aren't any good. I don't know how to Thank You, Boomer Jack In cold rainy Pa.
@harviemcclintock8165
5 ай бұрын
Great video ! I hate this site has taking away the ability to show and explain how to make a race gun. I have two sets I use for cowboy action. Purchase another six shooter to make a race gun
@outlaworganics5991
6 ай бұрын
Another awesome video Tuco thanks 👍🏻
@TUCOtheratt
6 ай бұрын
Glad you enjoyed it!
@puttherislife7341
6 ай бұрын
More long form content pls. Also, link videos to your shorts to get more engagement on the longer videos
@Nakke-h9g
5 ай бұрын
We need Tuco as legendary hunter in Hunt showdown. You must contact Crytek and tell them that Finland said get that shit done /
@timothybergeron1174
5 ай бұрын
Id really love to see you review the Taylor's and co single action revolvers. They have some that they claim are "Taylor tuned" for competition shooting and such id love to see your opinion of them for the price they are at
@TUCOtheratt
5 ай бұрын
A "tuned Taylor" has a nice action but it's like tuning up a car to run smoothly comparing to building a 9 second quarter mile hot rod. That's what a race gun is. There really is no comparison. Competition tuned single action revolvers can not be aggressively fanned or fast triple shot like a SAA race gun even though they can be used effectively in cowboy action or cowboy fast draw competition.
@6.7Rollin
6 ай бұрын
thanks for the cliff hanger, wanted to see the 1851's
@AMTruckin
6 ай бұрын
Great stuff brother !!! ✨️👌💯
@jmount7661
5 ай бұрын
Would you consider doing a review of a somewhat new single action on the market. The gun I am asking about is the Taurus Deputy in 357. As a relative new comer to single action shooting your review would help me a lot. I have bought my rifle and shot gun but am still not sure about the revolvers that would be best for me. I have rather large hands but could deal with the standard grip. THANKS for some Terrific Videos. Boomer Jack
@TUCOtheratt
5 ай бұрын
If I had one, I would. I watched a video closely that featured one on Guns Of The West channel. From what I could tell, it had contours like a Ruger new Vaquero. You really can't beat the Pietta GW2 starting around 550. They are a dead ringer to a Colt
@よなた-d8j
6 ай бұрын
わぁ〜…全部かっこいいなぁ〜…
@thesaint9216
5 ай бұрын
This guy should try to re-create MGS3 Ocelots routine for revolvers
@JohnDoesItAll
6 ай бұрын
Great Channel and content ❤
@TUCOtheratt
6 ай бұрын
Thanks so much!
@krwnik8419
6 ай бұрын
Great story and video! Have you ever shoot with Umarex Colt SAA? 💣
@TUCOtheratt
6 ай бұрын
No.
@ChrisEvoIII
6 ай бұрын
Hey bro, I just wanna say I love your videos your videos kinda got me hooked on all the revolvers. I’ve been watching you for a long time and love all of your content recently, I purchased one of my top-tier dream guns 1872 colt cattleman, revolver by Taylor and Co but sadly somethings going on with the revolver I only shot 100 rounds through it at the range. And a lot of weird stuff kept happening I can see the hammer kept striking the round way off where the primer was and later when I got home and inspected it every single screw was a loose on the gun. The bottom look like the it was splitting into two pieces. The handle was coming off and now when I put the hammer in the second position for reloading the cylinder spins freely forwards and backwards. I’m talking about so freely that if you blow on the cylinder hard enough, it would start spinning and the little fingers that come out to turn the cylinder really work anymore and are very chewed up. Very upset with the pawnshop that sold it to me. I’m gonna get in touch with them Monday to see what they say but what do you think I should do? Should I make a post about everything? saying who and where the business is bc God forbid, my hand could’ve blew up, considering every single screw was loose on the gun. It could’ve flew apart and came back and hit me in the face. Need some advice. 😢 btw I never fan the gun or nothing like that and I was using low grain cowboy rounds. The gun is chambered in 44-40
@TUCOtheratt
6 ай бұрын
Sounds like a Uberti. I don't know what to tell you to do. I like Pietta GW2 .
@ChrisEvoIII
6 ай бұрын
@@TUCOtheratt ya it is uberti i’m just gonna go to the pawnshop tomorrow and tell them to just give me a refund or exchange it for something else because this was ridiculous and honestly very dangerous, considering they never checked anything and all the handles and screws, and everything was loose w e i’ll let you know what happens tomorrow
@Bearlake1624
6 ай бұрын
Great idea
@SenTHR811
4 ай бұрын
Since I don't really know much about guns, can you sort of just grab the best parts from other revolvers and put them together to create the holy grail of cowboy pew pew?
@TUCOtheratt
4 ай бұрын
It's more complicated than that. But I explain more on my Rumble channel.
@DjangoLives
4 ай бұрын
Master Gunslinger, when will you test the New Taurus Deputy single action revolver in calibers .45 Long Colt and .357 Mag ? Thank You !
@TUCOtheratt
4 ай бұрын
Soon as they send me them 😃
@pete.303
5 ай бұрын
Ok, I like to throw a curve ball in once in a while. What would be cool is a single actioned colt python race gunned. That would raise the Tuco cool factor up a fair few notches… huh !
@TUCOtheratt
5 ай бұрын
I've never owned a double action revolver and have to interest in them.
@pete.303
5 ай бұрын
@@TUCOtheratt Exactly my point, make it single action only. Don’t ask me how I’m not a gunsmith but it would raise some interest.
@ManuelSanchez-iq5vt
6 ай бұрын
Great video 🤠👍👍
@TUCOtheratt
6 ай бұрын
Thanks for the visit!
@stevelevesque676
3 ай бұрын
Id love to see some of the things you did to make these race guns i have a replica colt saa airgun made by umarex and id love to try moding it so i can practice my double and tripple shots as my follow up shots seem to over rotate the cyclender sometimes by 3 or 4 rounds
@armybiker
5 ай бұрын
Tuco can you do a video on your reloading ammo equipment? I.E what brand and what you use. Thanks brother
@Bearclaw700
6 ай бұрын
TUCOtheratt, have you ever done fast draw with a modern double action revolver from a western holster? Would the time of the first shot be as fast as a single action revolver? Would this be safer than fast drawing a single action revolver? I think The Walking Dead Nebraska Bar scene - You tube is one of the best modern western style gunfight scenes ever made. The You Tube video is only 24 seconds long and worth watching. Also, I really enjoyed the video about the 1858 race gun.
@TUCOtheratt
6 ай бұрын
I have shot a few double action revolvers but I have never owned one. I suspect that if a person worked hard in practice to develop the skill necessary he could go very near the speed possible with a single action revolver, and yes it would be safer to fast draw a double action revolver than a single action revolver using live ammunition assuming all gun safety rules were followed. However, in terms of the fastest speed possible the single action revolver has the advantage because as the strong hand draws the gun and presses the trigger during the draw the weak hand can close in on the hammer for a fan shot as soon as the barrel is on target.
@НатальяКрючкова-д7э
6 ай бұрын
As aIways ,you are interesting,doubIerespect to you❤❤
@edmarmohr3611
6 ай бұрын
Muito bacana, valeu 👏👍👍😁😁🇧🇷🇧🇷
@brunomagnohahmann6786
5 ай бұрын
São sensacionais
@Sphinx-19
6 ай бұрын
thank you
@smaksymiv4950
6 ай бұрын
Great vid ... I'm gonna have to check out rumble ?!?! Is it ? Nice collection sir . I'm a fan of open tops and 1858 rem . I've a project in mind for the pitta rem ... see for me it's not just fanning or tripple shots . I want a balanced 58 ... (this means if the firearm is hung upside down by its trigger guard ... the tip of the muzzle is level with the handles heel ! Johnny Ringo and doc holiday ... eat your heart out 😂 Sir ... much respect to you . YOUR A FAST HAND . with respect , I've a question ... can you wheel , the wheel guns ? Spin I mean , I've fun with it , I've watched some of your videos... I've never seen you spin em .
@smaksymiv4950
6 ай бұрын
I'm also a big fan of draw technique... I've not got a drop holster . I'm a practitioner of the curly bill or if you like ... road agent spin . Off the left side of my belt !
@TUCOtheratt
6 ай бұрын
My right arm and hand was injured in a freak accident a couple years ago and my fingers remain stiff. I can just barley spin and have done so a few times in recent videos but it's harder for me than doing a triple shot.
@smaksymiv4950
6 ай бұрын
@TUCOtheratt sorry to hear about that tuco . Didn't mean to call you out man . I was shot thru my left hand carple tunnel with a senco air nailer 15 years ago ... I'm a south paw. I love all things hand speed I twirl single action and I've a parker pm 10 guitar which will soon be modified with semor Duncan humbuckers and spurco locking tuners.... I homeschool my 4 boys , we love your videos sir .
@TUCOtheratt
6 ай бұрын
@@smaksymiv4950 Thanks for the nice comments! I didn't feel like you called me out. It's a legit question.
@generalpurpose6517
6 ай бұрын
I love your stories
@ranren
3 ай бұрын
Here’s a question: Tuco…the Ratt??? Like your vids, though.
@J_Holliday
6 ай бұрын
Great vid Tuco, I posted an edit of you on my KZitem if you’re interested. The quality isn’t super sharp but you still look very cool in it. Thank you!
@TUCOtheratt
6 ай бұрын
I'll check it out. : )
@jackbrown3689
2 ай бұрын
yep that octagonal barrelled piece is beautiful, do you always use frame mounted firing pins or is that just a given with SAA race guns?
@CloudzModz
6 ай бұрын
Hello Tuco
@Eggmayor
6 ай бұрын
W video
@JM97111
5 ай бұрын
Hey man! What was your business? I’m in my early 20’s, working hard, but I’m scared to get out there and work for myself because I just don’t know which industry I should start with. Any advice for breaking the ice and starting my own thing?
@TUCOtheratt
5 ай бұрын
I am a house painter.
@ACrowNamedPoe
6 ай бұрын
Now the real question, when are you going to start building race guns for people, and how much $? Because at some point in the not too far off future I'd definitely be interested in purchasing a custom Tuco race gun if it were possible.
@TUCOtheratt
6 ай бұрын
Thanks for the nice comment. No I don't, and will never build race guns for other people or sell my guns. Just too many legal problems with that.
@ACrowNamedPoe
6 ай бұрын
@@TUCOtheratt perfectly understandable. My uncle did his own gunsmith work back in the day, mostly competition shotguns, and he had those same concerns. He still ended up doing a lot of work for folks though, sadly he needed the money bad enough to run the risk. That's been 25+ years ago and I still run into people who have his custom builds. For all the time I spent with him as a kid while he was working on guns I didn't retain a bit of the knowledge 😆🤷♂️
@terryszczudlik6466
4 ай бұрын
Your top choice is Pietta, yet you carry and customize the Uberti????
@TUCOtheratt
4 ай бұрын
I do videos with many different guns. My customized Uberti will outperform any stock SAA including Pietta. However stock for stock or race gun for race gun. Pietta's performance beats Uberti's
@edjones2110
6 ай бұрын
👍👍👍👍👍👍
@NZ_Western
4 ай бұрын
I just got my first single action recently. It's just a stock Uberti Evil Roy in .357 so one question I did have is how fast can I get with this revolver before I need to upgrade to a race gun to avoid damaging it? Obviously no fanning for the stock gun but I don't know how fast you can go just with two hands before it's 'too fast'
@TUCOtheratt
4 ай бұрын
Thumbing with the off hand, like a cowboy action shooter, as fast as you can shouldn't hurt anything. However, striking the hammer with the palm or fingers with any significant speed or force will damage it. More info on my Rumble channel. Thanks!
@diamondaranda336
6 ай бұрын
Badass
@IIsLazy
6 ай бұрын
would it be possible to release the photographs of the disassembled Bob Munden gun parts for others who are trying to get into race guns?
@TUCOtheratt
6 ай бұрын
not on YT
@wyattanderson76
4 ай бұрын
Please fan a Scholfield!
@TUCOtheratt
4 ай бұрын
Soon as Uberti gives me one.
@wyattanderson76
4 ай бұрын
@@TUCOtheratt man! That would be amazing! Would someone if tampering with the hammer be able to fan the Colt Walker 1847?
@wyattanderson76
4 ай бұрын
@@TUCOtheratt love your Channel By the way! Your videos always make my day.
@TUCOtheratt
4 ай бұрын
Maybe with a conversion.@@wyattanderson76
@tenzinite
5 күн бұрын
Will the Uberti screw sheer off with regular high round count use or is this more of a race gun issue?
@zack4977
5 ай бұрын
Do the Great Westerns have larger style grips? I'd love to get a single action but I have large hands and some grips seem too small for me.
@TUCOtheratt
5 ай бұрын
No, they have the original Colt 1873 size grips
@Thegamingenthusiastofficial
6 ай бұрын
Hey Tuco what do you think of the heritage rough rider?
@TUCOtheratt
6 ай бұрын
Junk
@Thegamingenthusiastofficial
6 ай бұрын
Thank you!
@bobsburgers2071
6 ай бұрын
next time u build one can u do a tutorial there is not much online or a set by step video on it anywhere
@TUCOtheratt
6 ай бұрын
you need to pay attention and watch my entire video
@bobsburgers2071
6 ай бұрын
@@TUCOtheratt i have and i think it’s great i understand the mods u have to do to the gun i was just saying a full build video to show visually how its done would be pretty cool didn’t mean any offence
@TUCOtheratt
6 ай бұрын
@@bobsburgers2071 no. you didn't watch this entire video and follow my suggestion
@bobsburgers2071
6 ай бұрын
@@TUCOtheratt alright mate 👍
@Chevrolet1994
6 ай бұрын
Interesting video! What is your preference Blued or Nickel guns?
@TUCOtheratt
6 ай бұрын
I like them both.
@garypayne-tl1le
6 ай бұрын
You ought to be in western movies, but all of the known western gunfighters didn't fan there guns which is purely Hollywood because ammo was expensive and depending on what you carried was hard to come by.
@checkmate664
6 ай бұрын
I want the Colt Navy, precisely the last one on the table, I love it, I just don't know where to buy it because I wanted to buy at least an airsoft one (if I really couldn't find the real one) because anyway I wanted a model that could be used because I have the license, but at least if I can't find the real one I wanted the airsoft, do you know where I can buy them both so that I can evaluate and buy one?
@TUCOtheratt
6 ай бұрын
In my country I can buy one at any gun store.
@checkmate664
6 ай бұрын
Unfortunately I'm in Italy and I can't go to an armory since mine is a small village and not a big city, so I needed a site
@TUCOtheratt
6 ай бұрын
@@checkmate664 You'd have to check into the laws in your country.
@Gfmp90
6 ай бұрын
Do you offer services to make race guns, or do you know of a good service that will make a race gun? I would love to have a single action revolver that would hold up to fanning the hammer and things like that.
@TUCOtheratt
6 ай бұрын
No. Sorry.
@LukeOldroyd-fs7el
6 ай бұрын
Hey tuco! Just wondering how come you prefer pietta instead of colt? Is there a difference?
@TUCOtheratt
6 ай бұрын
Colt quality is all over the place and they are way over priced. Pietta's GW2 are at least as good and replacement parts are consistently high quality and affordable imo.
@squibload58
6 ай бұрын
Would you be confident carrying a SA Revolver for self defense? Do you? Or do you carry something else?
@TUCOtheratt
6 ай бұрын
No I wouldn't carry an SAA. They are for fun only. I carry a Sig 320
@juninja22hero
6 ай бұрын
May I ask what the three little black strips on the grips of the revolvers are? I’ve never seen that on a revolver before. Is it just for aesthetic reasons? Is it to have better grip on the gun? Or is it a part of the process of turning it into a race gun? I’m fairly young, and don’t have the money or the freedom to be able to buy my own guns just yet, but I know that the single action revolver(don’t exactly know which model I’m going to buy yet) is going to be one of the first guns I ever buy.
@TUCOtheratt
6 ай бұрын
Those are grip tap strips, like sand paper. Helps managing recoil with one hand while shooting fast.
@andrewulrich8053
5 ай бұрын
What do you think of single action replica Colt air guns
@TUCOtheratt
5 ай бұрын
Never touched one
@andrewulrich8053
5 ай бұрын
@@TUCOtheratt i heard that umarex makes a good replica (chambered in .177)
@garrettevans8863
6 ай бұрын
I’m curious, do you have any experience with short stroke revolvers? I believe one of Bob Munden’s bird head Ruger Vaqueros was shown on Hickok45s channel years ago and Munden had made it into a short stroke where the hammer didn’t have to travel back as far as normal to engage the “full cock” notch. Would be really interested to hear your take on it in a video!
@TUCOtheratt
6 ай бұрын
I've only handled a short stroke SAA once. It's great for cowboy action slip thumbing but the action must remain a bit heavier than a race gun because all the movement/friction/inertia happens quicker and the main spring must be a bit heaver to build hammer drop speed with the short stroke.
@MrLePlumber
5 ай бұрын
@tucotheratt what are your thoughts on the standard manufacturing saa?
@TUCOtheratt
5 ай бұрын
I saw a couple of videos breaking one down. The ejection housing is screwed right to the barrel like a cheap Uberti. The action appeared to be corse. I think they are way overpriced.
@6Shooter357
6 ай бұрын
The ending left me hanging… 🫤
@TUCOtheratt
6 ай бұрын
So ...follow through and watch the next video.
@bennyb.1742
6 ай бұрын
Hey Tuco, is there a way to get a hold of you to talk more about your 1858 setup than KZitem will allow?
@TUCOtheratt
6 ай бұрын
Check out my Rumble channel.
@aaronbollhoefer8465
4 ай бұрын
How can I get in touch with you, I have some questions about my Colts.
@TUCOtheratt
4 ай бұрын
I think you'd like my Rumble channel. 😃
@FuItimate
4 ай бұрын
Hi @TUCOtheratt, where do you get your clothes from?
Пікірлер: 207