I would like to see more custom diecast Inspire by the entire history of NASCAR stock cars from early NASCAR to today
@Mad-Mel1
Ай бұрын
You should try to clear coat your finished customs. Do a couple of layers so that you can sand and polish the clear coat. In this way you can seal in and protect the decals and have a smooth finish. As for the broken body, use jb weld. Do one side at a time. Use white masking tape on the outside, lay it on its side, pour the jb weld into the gap. Be sure and have the other side taped to hold it in position. Once dry, flip to the other side, jb weld that side. Once both sides are dry, remove tape, then sand the jb weld. The advantage to this is you can position the body with the tape to set it in the position you need. Also, you can kind of taper the edges so that the jb weld forms sort of an hour glass shape which helps it hold better than two flat 90 degree surfaces. Use regular jb weld, jb quick isn’t strong enough. Hope this helps. Thanks for your great tips. Nice to see people advancing the hobby.
@PistonCupster
Ай бұрын
I’ll see what I can do
@eduardoaguero1220
2 ай бұрын
I really like Cars 3 era Dale, it feels like he could have been from the movie! all of the other customs are just as good, Dale Jr's just my favorite of the lot, really cool customs man!
@Greenareo9518
2 ай бұрын
Great costumes, my favorite is the Kyle bush
@cst31racingnetwork33
2 ай бұрын
6:09 right, Denny Hamlin you better win the Championship so he you can get turned into a cars character.
@PistonCupster
2 ай бұрын
We’ll see if he can finally put it all together this time
@mascacalin2024
2 ай бұрын
Cool costumes, my favorite is the Dale Earnhardt Sr.
@-Erch_Productions.29
2 ай бұрын
Awsome Customs!!!
@AlgebralienBFBandTPOT
2 ай бұрын
This is cool! We wanna see part 2! I’m hoping to see Chase Racelott in the NAPA look.
@JaxonOsterhout
Ай бұрын
I love those NASCAR projects you made :)
@kaedenguerzo
2 ай бұрын
Kyle Busch is my favourite driver 100/10 custom Diecast
@noramartinez1052
Ай бұрын
I made dale earnhardt but I used crusty rotor from cars 1 because of the black rims nice vid
@georgetheredengine277
Ай бұрын
I made mine out of Murray Clutchburn
@noramartinez1052
Ай бұрын
@@georgetheredengine277nice
@Candy-em5jf
2 ай бұрын
Nice! Dale Senior is my favourite one.
@NVRacingProductions
2 ай бұрын
That's AWESOME! I like these customs as well as CarsShifter ones. But I think you should have been used the Cars 3 chassis for Kyle Busch, since his debut on M&M's car was in 2008.
@ummmwhat-tx3mj
2 ай бұрын
dang i cant wait for premier and those are cool customs edit: the customs are really sick
@Terminatorfan1984REAL
2 ай бұрын
I do love how you did your customs I done some customs of NASCAR (One I am surprised didn't get damaged during customizing if you get what I mean), However the Dale Jr I made is different than yours as the one I picked was when he sponsored Nationwide
@jascaharringtons-xr3cz
2 ай бұрын
I also like Tyler Reddick
@Carsboy95
2 ай бұрын
These are awesome! I like the dale Earnhardt one the best.
@Ninjagoda15
2 ай бұрын
We need some custom diecast inspired by the 2000’s era of NASCAR
@diecastreviews11
2 ай бұрын
man I wished mattel made some iconic schemes to these piston cup veteran racers. would be cool to see a jimmie johnson on a cars 1/3 veteran racer
@nathanielalcazar05
2 ай бұрын
Yes, woohoo yeah baby that's what I'm saying
@user-mq2vd8sg9p
2 ай бұрын
I made Jeff Gordon in the rainbow warrior scheme
@carscollector9594
2 ай бұрын
Well now you need Jeff Gordon!
@PistonCupster
2 ай бұрын
If I find another Jeff Gorvette 🫡
@NVRacingProductions
2 ай бұрын
@@PistonCupsterYou can use McQueen's body for Jeff since McQueen is a mix from Viper, Corvette and NASCAR car.
@georgetheredengine277
2 ай бұрын
@@NVRacingProductionsand maybe decrease the size of the spoiler to match the Monte Carlo spoiler
@NVRacingProductions
2 ай бұрын
@@georgetheredengine277 Idk. Too long ig
@Adamthetankengine
2 ай бұрын
@@PistonCupstermaybe you could use a dale jr
@tgs2141
2 ай бұрын
In my opinion and this is just me, having Dale Jr stay as the DEI driver is a bit wrong, considering he left in 08 and on bad terms, I feel he’d be self sponsored by Jr Nation, plus DEI shut down in 2008 and for good by 2013
@PistonCupster
2 ай бұрын
@@tgs2141 there are some junior motorsports logos on him, but I absolutely see your point
@NVRacingProductions
2 ай бұрын
What about a headcanon, that in 2008, DEI was purchased by Hendrick instead (if Chip Ganassi NASCAR team doesn't exist here). Dale Jr. will own ex-DEI logos and cars. Let's imagine when Dale retires after 2016 Piston Cup season, the team let Alex Bowman race for JR #88, until 2020, when he moves to #8 (placeholder for #48). In 2021, Ross Chastain debuts and races for Hendrick until Justin Marks purchased the charter. Now, Ross races for Trackhouse as a teammate of Daniel Suarez (I hate the carfied name).
@AcManoloxkasha
2 ай бұрын
I would love to see Customs about the Days of Thunder Movie but as Cars Version Like, Rowdy Burns, Cole Trickle, Aldo Benedetti and Russ Wheeler
@bowlinerailfan
2 ай бұрын
I guess that 3 car can be called "Dale Carhardt."
@mcbombernuggets
14 күн бұрын
Firey as Tyler Reddick Cake as Kyle Busch Stapy as Ross Chastain Eraser as Daniel Suarez Leafy as Chase Elliot Basketball as Ryan Blaney Marker as Bubba Wallace
@rouge4736
2 ай бұрын
You should do a tutorial on how to make decals
@AndyGreenFox2005
2 ай бұрын
1:58 dude you forgot rsn(it's not a sponsor in piston cup but could be it)
@mattbriggs2007
Ай бұрын
Hopefully you do Ryan inside Laney in his championship car from 2023
@saaaraaa1492
2 ай бұрын
These cars look amazing Can you do your race damage custom diecast collection
@PistonCupster
2 ай бұрын
@@saaaraaa1492 once I have a few more done
@Adamthetankengine
2 ай бұрын
Have you thought of making the nation wide dale jr
@PistonCupster
2 ай бұрын
@@Adamthetankengine probably not, the cars 3 Dale jr I have is the sub in for him
@KrevnaMuffler29
23 күн бұрын
How did you car-iffied the Dale Earnhardrt logo?
@f1managerclash367
2 ай бұрын
I want eugene carbureski as nascar
@MacaTrilife
2 ай бұрын
If You can make more you can still try Jeff Gordon maybe cale yarnbourgh I think that’s the name and here’s a another modern one Ryan newman
@jascaharringtons-xr3cz
2 ай бұрын
what is your opinion on Kyle Busch or Mark Martin
@foxycat126
Ай бұрын
What happened to Chase Elliott Daniel Suarez Ryan Blaney or Bubba Wallace wins
@theforgotten13car
2 ай бұрын
What ration did you print the templates at?
@PistonCupster
2 ай бұрын
@@theforgotten13car the templates I have provided have multiple sizes on them based on preference, so printing directly from that onto printer paper should give you some options on what size you want your decals to be.
@RubyFilms625
Ай бұрын
Why did you not make Kevin harvick
@Larrymckingthecarsfan-51
Ай бұрын
Who are those racers?
@Travisthebat8647
2 ай бұрын
Hi
@mateostephens1659
2 ай бұрын
2:13 Did you use photoshop for the rendering?
@PistonCupster
2 ай бұрын
Google drawings
@tomassantos3405
2 ай бұрын
Do you have any mold of the eyes models? To know the size
@PistonCupster
2 ай бұрын
Generally I just measure them with a ruler and print out multiple sizes to be safe
@tomassantos3405
2 ай бұрын
@@PistonCupster I don't know if you saw it but the links in the description only one works, the other two don't have permission
@PistonCupster
2 ай бұрын
I have them private, but if you request access, I’ll let you view it
Пікірлер: 62