stopper 9:30 : pull back plate to position you want, glue 2 belts on top part of the back piece (about 2cm), then glue about 2cm on top part of those belts on to helmet, done
@masterhyi5393
11 жыл бұрын
I don't quite understand the part about the stopper that stops the back from going in or out too far
@0NauGhT0
10 жыл бұрын
What exactly is "paper clay"?
@DALILOMODIY
10 жыл бұрын
looks & feel like sculpting clay & play doh, air-dry, no baking needed, only it made of paper fiber, usually white in color. cheap, easily found in art craft supply, usually in kids department & japanese craft dept. :)
@DALILOMODIY
11 жыл бұрын
sorry i don't understand "q vc"? :)
@DALILOMODIY
11 жыл бұрын
@Mick Clark, yes, i've tried, & i like pepakura too. but this template has less cutting & easier to test fit :)
@BJ-xk3ef
5 жыл бұрын
9:57 How dare you combine Marvel and DC 🤣🤣🤣😂
@DALILOMODIY
9 жыл бұрын
Chuken Hachiko all template in my blog dali-lomo.blogspot.com/ :)
@ronangeles7705
9 жыл бұрын
i would like to ask? in your link in the description of the template it says it cannot be found please help? thanks a lot
@DALILOMODIY
9 жыл бұрын
Ron Angeles i've checked, all links seems fine, can you try again dali-lomo.blogspot.com/2013/06/iron-man-helmet-diy-41-cardboard-cut.html :)
@symphoystudio9648
8 жыл бұрын
please reply asap
@Smilebirde9
8 жыл бұрын
It looks so hard
@desenhosprojetomarcenaria
10 жыл бұрын
some links are broken, you can put again, thank you ... congratulations for the helmet
To make it smooth, I think you can also put paper mache on the cardboard and then sand it down. I just find it easier.
@alexataylor5075
5 жыл бұрын
Has anyone tried this? If so, how did it turn out? I want to know because I want to try it on my helmet. Thx (:
@muniraadleena9106
8 жыл бұрын
you are so bloody genius 👍👍
@mickeyvermaarts9005
2 жыл бұрын
Sir i couldn't find the lowerlip template
@DALILOMODIY
11 жыл бұрын
ya, add depth & make the helmet a bit stronger :)
@Marco-wn9xv
3 жыл бұрын
What do you mean
@DALILOMODIY
11 жыл бұрын
ya, check out part 3 :)
@DALILOMODIY
11 жыл бұрын
ya, that shud work too :)
@DALILOMODIY
11 жыл бұрын
i used to put music in my video, but sometime youtube just mute it or ask me to provide music copyright thingy, so i ended up silent all my video. well, i never understood this copyright stuff... :)
@DALILOMODIY
11 жыл бұрын
paperclay is clay body to which processed cellulose fiber (wiki). my explanation is clay-like art material made of paper fiber, air-dry, light-weight, easily found in art supply store. i think plasticine does not air-dry, so i think it will not works here :) i watched some of ur video, car body filler works too
@DALILOMODIY
11 жыл бұрын
yes :)
@DALILOMODIY
11 жыл бұрын
just plain simple recycle cardboard box, glue gun, pva glue, paper clay, wall filler plaster & time. no secret recipe or anything, just as you seen in these video, go ahead & try it :)
@ediblelipstick109
6 жыл бұрын
9:57 actually the inside of the mask is there is another mask cool right?
@DALILOMODIY
11 жыл бұрын
yup, not pepakura. the sendspace downloaded A4 PDF shud be medium. scale by using printer setting, "increase/decrease 10%" until it fits ur size :)
@DALILOMODIY
11 жыл бұрын
yes, if too much pressure. i hv put this helmet on more then 20 times, no crack so far. u can harden it by applying epoxy resin on the cardboard (inside & outside) before bondo, if u hv the extra cash :)
@DALILOMODIY
11 жыл бұрын
"wall filler plaster" walll relleno escayola (google translate) *thanks bruno for translation, haha :)
@DALILOMODIY
11 жыл бұрын
use a sharp blade cutter to cut it open
@shogunate2
11 жыл бұрын
I am attempting to make a 3 iron man suits out cardboard I have for my nephew and my twin boys I already did the faceplate but this video says otherwise so I'm asking if its possible for me to send you measurements and you send me back the files to print... I would really appreciate it. Thanks
@daryldixon1108
11 жыл бұрын
dude, i could not, and i did the same as you, print, cut, and the glue, but no case, i had to close all the mask and will not open now, just my luck, what could i do?
@nadeemandalusi9723
11 жыл бұрын
insted of use car bondo can i use clay ? and how much time did the iron man helmet take you? , can you give me the link of prepakura of the iron man helmet ?
@nadeemandalusi9723
11 жыл бұрын
insted of use car bondo can i use clay ? and how much time did the iron man helmet take you? , can you give me the link of prepakura of the iron man helmet ?
@CoisasdeMarByMarlivoneBarros
4 жыл бұрын
Congratulations! Visit me too! see my pieces there.😉
@SershanTV
11 жыл бұрын
hi bro! i have 2 question.... 1.Can I replace with pvc pipe glue? 2. whether PVA, PVC pipe glue, and wood glue made from the same material?
@Marco-wn9xv
3 жыл бұрын
Dali when you finished sanding, is there still some leftover like some empty spot in the faceplate, I mean not smooth enough?
@RBrown803
11 жыл бұрын
Nice. I find it funny that you have a Boba helmet in your avatar. I am actually working on a Custom Mando Armor now
@bcoronga
11 жыл бұрын
What did you applied on the helmet? *This Brazilian guys doesn't know how to use the damn google translator ¬¬'
@abhisheksinghrajput3526
5 жыл бұрын
bro the retractable back pdf is incomplete plzzzz upload full pdf
@dianamatos8275
9 жыл бұрын
What was the white material you used on the mask after you used the bar bondo (the red spray)? Is it still pva + water + paper clay?
@kaushaljha3384
5 жыл бұрын
Would you like to make wwe Championships belts
@FELIPEJS
11 жыл бұрын
poracaso talked to you, do not meddle in the conversation of others
@fuzedd
11 жыл бұрын
!!?!??! Really i think the anime is but the manga is on its last arc D: farewell bleach
@SFTortoise
11 жыл бұрын
To minutes of no sound? best mask made of carboard! but should of added a loop track?
@MarcioMercaldi
9 жыл бұрын
Great job but let me ask you bro! Before you used a Bondo, did you use paper mâché??? Or you use paper mâché in other time and I didn't see?? thanks
@DALILOMODIY
9 жыл бұрын
Marcio Mercaldi i will use paper-mache when i think the cardboard is too soft :)
@kyleaclaro2579
2 жыл бұрын
can i use plaster to smooth it? i'm just 13 yrs old. they don't allow teenagers to buy some fillers on supermarket. i only have plaster in my stockroom
@DALILOMODIY
2 жыл бұрын
yes plaster will do just fine
@GrahamFraser
10 жыл бұрын
your final coat of PVA worsens the final product. Just do a supreme sanding and paint it properly to get a good metallic shine. The PVA does not harden 100% smooth. You should have just continued sanding with finer paper and used more material, you should be able to see the cardboard before and after you sand. Use bondo with multiple sandpaper grits for a much better result.
@DALILOMODIY
10 жыл бұрын
great tips :)
@ashleycompton6761
7 жыл бұрын
ive got one name for you ... LEGEND
@HowToMakeCostumeProps
10 жыл бұрын
dude, i definantly subscribed
@symphoystudio9648
8 жыл бұрын
but I did one side of the hinge with cardboard! I'm doing the hinges with cardboard because I don't have plywood or tin
@DALILOMODIY
8 жыл бұрын
i think cardboard is too weak for hinges, you need something much stronger, plywood or hard plastic :)
@0NauGhT0
10 жыл бұрын
okay this video was just a solid tutorial till I saw your retractable back piece. That was BOSS!
@DALILOMODIY
10 жыл бұрын
then you should see my laziest hinges design :) #34: Iron Man Mark 42 Helmet DIY 7/8 - easiest/ laziest faceplate "hinges" EVER
@thegoal89
10 жыл бұрын
increibleeeeeeeeeeeeeee =)
@symphoystudio9648
8 жыл бұрын
hey Dali I love your works but I did the helmet without hinges but it's not perfect on top and sides of the faceplate when fitted on the helmet must b a practice problem or must b the problem on which the cardboard didn't bend enough so if there's anything u can do please reply and u are the most awesome bro!love ya please reply asap
@DALILOMODIY
8 жыл бұрын
the hinges here is a bit tricky, i think using a magnet or rubberband would be much easier, see my mark 42 for rubberband design :)
@TheJeremyevans
11 жыл бұрын
what is paperclay. is that ordinary plasticine. excellent build
@jamalsalifu4557
9 жыл бұрын
Exactly how hard and strong is the cardboard after applying bondo to it? Is it as strong as it would be with fiberglass resin added?
@DALILOMODIY
9 жыл бұрын
Jamal Salifu never tried resin before, but i think fiberglass resin is much stronger :)
@SuperDman90000
11 жыл бұрын
This isn't pepakura files right? So how do you scale them?
@Chathurinda711
8 жыл бұрын
you're using car putty to make it strong and smooth, I saw other guys use epoxy resin to do that so is there a difference between car putty and epoxy resin ? does car putty crack under tension ?
@DALILOMODIY
8 жыл бұрын
+Chathurinda711 car putty only make it smooth, doesn't make it much stronger, resin is to make it hard, so if you're not using papermache, i suggest you use epoxy resin :)
@braxtonyap7873
5 жыл бұрын
How to you make paper clay?
@Marco-wn9xv
3 жыл бұрын
Dali after you add the paper clay onto the faceplate did you sand it or you sand it after you primer it?
@DALILOMODIY
3 жыл бұрын
sand it
@bentran5469
10 жыл бұрын
how do you get the top part of the faceplate (the v) to fit so perfectly, mine wont because it just folds up and then the gap in between the v is tiny. thanks
@DALILOMODIY
10 жыл бұрын
this template is not the friendliest, you have to modify some part :) try #27: Iron Man Mark 42 Helmet DIY 1/8 - Print & Cut (cardboard, with template)
@AmazinHazenful
10 жыл бұрын
Is there an instructional book available for this helmet? Very cool btw
@DALILOMODIY
10 жыл бұрын
so far no, hope these videos help :)
@jatindataniya4878
3 жыл бұрын
Bro can u tell me on which size of paper should I print your given template
i cant download files they wont come up ihn pepakura!!! plz help i really want to m ake this helmwet
@DALILOMODIY
10 жыл бұрын
Jake Ryan this build has no pepakura, build mk42 if you want pepakura template :) #27: Iron Man Mark 42 Helmet DIY 1/8 - Print & Cut (cardboard, with template)
@SHIVAMYADAV-jc5sg
4 жыл бұрын
Sir ,Which company spray paint you used in this video plz tell me
@DALILOMODIY
4 жыл бұрын
no specific brand, just use
@mattiapalazzolo7682
8 жыл бұрын
the two round side pieces with square cuts as you made it ?? downloading files there
@DALILOMODIY
8 жыл бұрын
+Mattia Palazzolo this project used a lot of freehand, try search mk42 from my video, easier :)
@ragincontrollers9456
10 жыл бұрын
Would it be possible for me to make this and disassemble my beats wireless into the ear cups and listen to music
@DALILOMODIY
10 жыл бұрын
why not :)
@RaviKumar-hy3yr
6 жыл бұрын
where do you get spray paint
@azerhuseynli1088
9 жыл бұрын
Ela
@ryatt9365
7 жыл бұрын
2:27 What the heck?! You used like five different types of measuring tools!!! Great build though.
@Hidd3nman87
8 жыл бұрын
can I use paper mache and paint it with a paint brush instead of this form?
@DALILOMODIY
8 жыл бұрын
+Astro Beast yes :)
@Ridze100
10 жыл бұрын
can i fill up the gaps with paper mache instead of paper clay?
@DALILOMODIY
10 жыл бұрын
yes you can :)
@joenguyen7784
9 жыл бұрын
i tried this build over 3 times already😂😂im so bad at this😕
@DALILOMODIY
9 жыл бұрын
Joe Nguyen try magneto :)
@wihangawijesekara249
9 жыл бұрын
Man, thanks a lot.
@jadeyooreem
11 жыл бұрын
I am the thousandth subscriber! XD
@nagalakshminagalakshmi2117
4 жыл бұрын
Bro please slowly part1
@nicholasvelazquez226
10 жыл бұрын
Cool where can I buy the poster color from? and I was wondering cause I made an iron man helmet and your video helmet a lot I thank you for that. But when I made the mask I used paper mache to keep it together but it turned out to have almost like craters on my mask. Do you think if I use pva glue it'll like smooth it out like how yours is?
@DALILOMODIY
10 жыл бұрын
pva glue mix with wall filler, apply it to ur faceplate, later sand it with sandpaper, it shud be smoother. pva alone won't make it smooth. poster color is optional, u can skip it, i got mine from art supply store, they sell pva glue too
@nicholasvelazquez226
10 жыл бұрын
Excellent! Lol do they probably have it at ac Moore?
@abishaqleel406
11 жыл бұрын
Hey dali1lomo I am a massive fan and I totally think that your awesome :) I was wondering if you could make the pepakura version of the iron man helmet mark 8 but with You saying the instructions and slowing the video!!! Please make it and carry on what you do you are a legend :) :) :) :)
@FELIPEJS
11 жыл бұрын
q vc passed the helmet?
@hazoish7670
7 жыл бұрын
Also if your spray painting then don't go ham on the spray painting so don't just spray everywhere Apply an even coat of paint
@symphoystudio9648
8 жыл бұрын
I don't know how it came so much perfect for you on the top and sides of the faceplate so please help me in that
@_nguyenhuuan
4 жыл бұрын
What is that white thing  What is that white thing 
@DALILOMODIY
4 жыл бұрын
paperclay
@treygavino
5 жыл бұрын
Where's the template for the colapsable back piece, I can't find it
@joenguyen7784
9 жыл бұрын
elementary*😄
@patrickalex2367
10 жыл бұрын
Teaches you how to
@tonyschannel1786
11 жыл бұрын
Thank you for the help it has turned out very well right now im painting maybe tomorrow
@quadrinoxgaming8140
8 жыл бұрын
Please give me the back side of the template
@DALILOMODIY
8 жыл бұрын
+Rohit Sunil no download, just see reference on blog dali-lomo.blogspot.com/2013/06/iron-man-helmet-diy-41-cardboard-cut.html :)
@ronangeles7705
9 жыл бұрын
THANKS
@Najimi420
10 жыл бұрын
if i want to put paper_mache how many layer should i use?
@DALILOMODIY
10 жыл бұрын
up to you, depends on how solid you want it to be, i always put 3 to 4 layers :)
@Najimi420
10 жыл бұрын
thanks
@RBrown803
11 жыл бұрын
This is fantastic. As I was watching, I was trying to figure out what the "mounting board" was used for? Does it add more depth
@kimpeinture8480
10 жыл бұрын
great!!!
@CHAMPDARIUS
6 жыл бұрын
nice vid dude
@TheOnlyMitchDizzle
11 жыл бұрын
Bleach is canceled :(
@mathiaslee7544
11 жыл бұрын
i would never understand how to do this haha but your videos are helpful & give myself and everyone else some ideas :)
@TheOnlyMitchDizzle
11 жыл бұрын
I've always wanted to make an Iron Man Helmet, and you sir have some great ideas and easy tutorial for beginners! thanks!
@novaquilla9456
10 жыл бұрын
How thick is your cardboard box
@DALILOMODIY
10 жыл бұрын
pizza box will work just fine :)
@suhamhafiz697
3 жыл бұрын
Hi🤣🤣🤣🤣🤣🤔
@Bryan-bp3mc
7 жыл бұрын
where do u get paper clay? I cant find it haha
@reyvenpl3525
11 жыл бұрын
look's cool :))
@Chathurinda711
8 жыл бұрын
I have a problem , My face plate is not lining up with the helmet I hot glued it to the helmet but when I cut it off from the helmet the faceplate looses its shape , What should I do?
@DALILOMODIY
8 жыл бұрын
+Chathurinda711 did you soften harden it, watch my "mark 42 harden, soften" video :)
@Chathurinda711
8 жыл бұрын
thanks I watched it !!! btw just like your redhood video if I paper mache this with news papers and painted it can I smooth it without using putty ?
@symphoystudio9648
8 жыл бұрын
+Dali DIY can u reply asap?
@DALILOMODIY
8 жыл бұрын
Chathurinda711 yes you can always papermache more layers, sand it smooth, without using any putty :)
@theterrorinc
11 жыл бұрын
This is great. I would love to see the vid of your hinge, if you haven't posted it yet.
@fuzedd
11 жыл бұрын
You Watch Bleach xD
@TheDIYTechXpert
8 жыл бұрын
hey Dali.. I have a doubt.. Can you explain me about the retractable back please? is it like this? you cut the ear piece frame and attach a circular piece to the cardboard strip and you kinda clip it on the frame so it cud rotate.. correct? pls reply..
@DALILOMODIY
8 жыл бұрын
+The DIY & Tech Xpert! !!!! yes correct :)
@TheDIYTechXpert
8 жыл бұрын
+Dali DIY Thanks a lot buddy.. is there any way I cud show my work to you?
@DALILOMODIY
8 жыл бұрын
The DIY & Tech Xpert! !!!! you can show it on instagram #dalidiy, i will see it instagram.com/dalilomo/ :)
@CTiCoNiCCTO
10 жыл бұрын
Could I buy one from you for $40
@DALILOMODIY
10 жыл бұрын
not planning to sell it at the moment, but thanks for offering :)
Пікірлер: 225