So it’s just loads of experience and the patience of a zen master. Got it. I’ll keep working on both. Thank you Jon! A pleasure to watch.
@jonbarrett8452
3 жыл бұрын
Thank you very much mate. I hope it was useful for you 😊👍
@joemeka7905
3 жыл бұрын
I had given up on doing eyes a long time ago, but your tutorial has inspired me to give it a try again.
@jonbarrett8452
3 жыл бұрын
Hi mate. Really good to hear that this video has helped you. Just keep doing it on all your figures from now on. Pretty soon it will be a lot easier and it's worth spending that 20 minutes doing the eyes, because personally I think that it makes the figure better. Take care and thanks. 😊👍
@duxbellorum01
3 жыл бұрын
Wish I could press the like the button every time I watch this. 😊 Thanks again good sir!
@jonbarrett8452
3 жыл бұрын
Hi mate. You are most welcome. 😊👍
@escaperealityhobbies
2 жыл бұрын
Very, VERY HELPFUL!!! I have lots of 3d printed minis but the helmets are molded on making it tough...
@NicGamz
3 жыл бұрын
I never paint eyes. But after see how outstanding you paint faces I have to try paint eyes on one of my figures. Your figure really looks alive from your face paint, well done!
@jonbarrett8452
3 жыл бұрын
Thank you very much 😊👍
@escaperealityhobbies
2 жыл бұрын
Forgot to add....So, so lifelike!!!!
@jonbarrett8452
2 жыл бұрын
Thank you 😊 👍
@maryhinge6334
3 жыл бұрын
Great tutorial. Lots of good ideas in there. 👍
@jonbarrett8452
3 жыл бұрын
Thanks Mary 😊👍
@alessiodecarolis
Жыл бұрын
Eyes give character to the face, so I always do them. Nice tutorial, also if I generally follow another method, first I paint the whole sockets black, then I make two tiny dots with VGC Bone White on each eye's side, then eventually refine with a thin D. Brown line. I think could be interesting a tutorial about not-caucasian skins.
@SheppeyRed
3 жыл бұрын
You must have the patience of a saint mate.
@jonbarrett8452
3 жыл бұрын
Didn't say it was quick mate lol. 🤣😊👍
@mobileandhostile7895
2 жыл бұрын
⭐️ have only just caught up with this tutorial - REALLY helpful and most useful to see the method behind your technique 😎 ⭐️ thanks for sharing your knowledge 👍
@jonbarrett8452
2 жыл бұрын
You're welcome. Hope you find it useful 👍 🙂
@andrewmilligan5656
3 жыл бұрын
Thanks for this. Great insight.
@albertrodriguez2287
2 жыл бұрын
Thanks for the tutorial!
@jonbarrett8452
2 жыл бұрын
You're welcome mate 😊👍
@tonylucyk4025
3 жыл бұрын
That was excellent Jon. Your attention to detail is amazing. Much more work involved than I thought. That presentation is good as well as you can’t see what people are doing on videos anyway so the way you describe and then paint works well. Excellent! Will be watching it a few times to soak it all in! Thanks 🙏🏻
@jonbarrett8452
3 жыл бұрын
Awesome Tony. Really pleased you found it useful. 😊👍
@waynehumber8906
2 жыл бұрын
Amazing! You inspire me to try to do better. Thanks!
@jonbarrett8452
2 жыл бұрын
Thanks Wayne. Good luck and enjoy mate.😄👍
@johnc7746
3 жыл бұрын
Great tutorial Jon, your faces are great!
@jonbarrett8452
3 жыл бұрын
Cheers John. Glad you like it mate. 😊👍
@SolventAbuseUk
3 жыл бұрын
good to see you approach bud
@jonbarrett8452
3 жыл бұрын
Thanks mate. 😊👍
@johnlee5423
3 жыл бұрын
Top drawer painting
@jonbarrett8452
3 жыл бұрын
Cheers John. 😊👍
@OW...
3 жыл бұрын
Nice one Jon...good to finally see the master at work..
@jonbarrett8452
3 жыл бұрын
Lol thanks mate. Was it any good? 🤔
@OW...
3 жыл бұрын
@@jonbarrett8452 , Was a good run through. Lot of layers, for an Army i think i would cut some of it out, but for single figures perfect. I bought some of the vallejo smoke you recommended a while back, trouble is i find it very dark, even watered down. I go with a red brown undercoat, a german orange, which is a pinky colour, then flat flesh, then highlight with basic skin tone, then a flesh wash.. I'll have to look at that smoke again. Appreciate your time on this vid, was good to see.
@jonbarrett8452
3 жыл бұрын
@@OW... I only use the vallejo smoke for lining mate. 😊👍
@noodlewargames
3 жыл бұрын
Nice work !
@jonbarrett8452
3 жыл бұрын
Thank you very much 😊👍
@kitswithkaren5003
3 жыл бұрын
A very nice informative video and well worth watching.Things i need to know when i get on to the 1/35 scale stuff.I must say those victrix figures are very tempting.A few issues with the focus but overall very good.What you could do with is a small tabletop tripod for stability.A video such as yours is easily made even on a phone.Cameras on phones these days are very good you just need the stability.Overall a good video even with the small niggles.This will help beginners greatly with their face painting of miniatures.It was good that you showed the paints you were using.Well done🐻🤗👍
@jonbarrett8452
3 жыл бұрын
Awesome. Thank you very much for your help. 😊👍
@kitswithkaren5003
3 жыл бұрын
@@jonbarrett8452 👍
@danjackson4460
11 ай бұрын
Great job as always Jon 👏 . Is there a reason why you use both Vallejo flesh wash and Reikland Fleshshade?
@jonbarrett8452
11 ай бұрын
Thanks mate 👍
@mcnab4236
3 жыл бұрын
Thanks mate
@jonbarrett8452
3 жыл бұрын
You're welcome 😊👍
@MrVuvuzaala
2 жыл бұрын
Nice one, Jon; what size brush do you use for faces, please?
@jonbarrett8452
2 жыл бұрын
Thanks mate. I use a 0 for most and a 000 for eyes. 😶👍
@MrVuvuzaala
2 жыл бұрын
@@jonbarrett8452 Thanks for the reply; I'll give your method a go over the Crimbo break, although I can envisage it will take me several attempts! I've just returned to the hobby, after a 20+ year break. I'm learning a lot from your tutorials, as well as a few others on here. Currently I'm painting some early Saxons, from Warlord Games, using zenithal priming/high lighting, and under painting, with Scale 75 Instant Colors; using brushes as I do not have an airbrush and no where to use rattle cans! I will use your tips for the faces and leather and wood effects, as they look very impressive!
@jonbarrett8452
2 жыл бұрын
@@MrVuvuzaala let me know how you get on with it 😶👍
@Parzalon
3 жыл бұрын
Nice technique! personaly I dont paint eyes on a regular basis, when their is a shadow of a helmet above them. so I only have to drown the eye sockets in reikland fleshshade, and that looks very natural. :D
@jonbarrett8452
3 жыл бұрын
Hi mate. I have been doing it for a while and this way seems to work well for me. 😊👍
@TheCombatartist
2 жыл бұрын
Speak up man!
@jonbarrett8452
2 жыл бұрын
Lol sorry mate. I am a bit rubbish at this video tutorial stuff. Did you manage to get enough info from it?🤣🙂👍
Пікірлер: 53