Cute and informative video! Love the tip about using a marker to gauge when metal is annealed enough.
@TheArtOfMetalsmithing
Жыл бұрын
It's one of my most favourite tips from the jeweller's community, it helps a lot :) Thank you so much for watching today! ❤️
@dustinpollard6237
Ай бұрын
Good info, been smelting tons of silver and pouring molds for customers. In between ive been experimenting with casting and hammering bracelets, rings and flat pendants without a rolling mill. Your tip about the sharpie is very helpful and i will use it. Plus i didn't know charcoal reflects the heat, it takes so much more energy to melt large quantities when the ceramic crucible absorbs the heat.
@daddydayne
Жыл бұрын
I could listen to you all fay you have such a wonderful soft voice... loved this tutorial and the new apprentice 😅 really looked like she was taking it all in with that pencil ✏️
@TheArtOfMetalsmithing
11 ай бұрын
Thanks so much! 😊 I'm very happy you enjoyed it!
@debbierowe965
Жыл бұрын
I enjoy your videos so much and you are utterly adorable. Great personality and information!
@karrywright9359
Жыл бұрын
Thanks so much for sharing the vid. Yes, it is interesting to see how you use all your scraps. 🥰🤩 thanks again
@TheArtOfMetalsmithing
Жыл бұрын
Thank you so much for watching, Karry 💕 I'm happy you found it interesting
@jeffscheurkogel
Жыл бұрын
Student asking the questions we are all wondering. Lots of good tips and helpful information as always. Thank you!
@DadsJewelry05
2 ай бұрын
Thank you for your tips and ideas madam. It's very helpful 😊😊
@TheArtOfMetalsmithing
2 ай бұрын
glad you think so! thank you :)
@MeerkatHandcrafted
Жыл бұрын
Seeing your videos always makes my week❤. Love it.
@TheArtOfMetalsmithing
Жыл бұрын
That's so wonderful to hear! Thank you so much ❤️
@knokeydv
4 ай бұрын
I just got a rolling mill last week. I could not afford a good one but this one seems to be adequate for now. I would be interested in seeing what you do with the patterned sheet metal after you produce it.
@akgoldbear7669
Жыл бұрын
I wonder 🤫how many times you rehearsed to smile so beautifully 😁
@TheArtOfMetalsmithing
11 ай бұрын
Oh, it's all natural! haha :))
@pirazyoko
Жыл бұрын
Ale śmiechłam na początku xD , a te zasuszone listki - łaaaaaaaaaaaaaaaaał
@TheArtOfMetalsmithing
Жыл бұрын
Hahaha, cieszę się, że Cię rozbawiło 😂 Nie byłam pewna, czy się uda oddać to, co sobie tam umyśliłam w głowie (bo w sumie nigdy za bardzo nie filmuję takich rzeczy), ale jeśli Ci się spodobało, to znaczy, że wyszło 😄
@coldpond
Жыл бұрын
Well done! Very informative information. Thank you!
@pkgoldopalhunting
Жыл бұрын
nice how you roled the paterns
@Queenie-the-genie
6 ай бұрын
This is great! Thankyou!
@PatriziaChinzari
Жыл бұрын
You are very nice and your tutorials are really useful thanks🌻
@TheArtOfMetalsmithing
11 ай бұрын
You're very welcome 😊 I'm happy you like them ❤
@designsbykent
Жыл бұрын
Search for cupcake wrappers. You'll find a lot of simple cupcake paper cups, but you should also find several lace things that work well for running silver through a rolling mill. Maybe you can find a better search term. Being paper they are of course single use only. Kent
@TheArtOfMetalsmithing
Жыл бұрын
That's an excellent idea, thank you for sharing it :)
@VanessaBasora
Жыл бұрын
I LOVE this video Basia! 😊 You have a great way of mixing humor, tutorial and sponsorship without it feeling like a commercial. I appreciate that. 🫶🏽 Congratulations on partnering with Pepetools. I enjoy patronizing their business. ☺️
@TheArtOfMetalsmithing
Жыл бұрын
That means a lot, Vanessa, thank you so much lovely ❤️ I had a lot of fun making this video, but wasn't sure if people would enjoy this format, so I'm very happy to hear that you did 😊 Thank you for watching!
@crowsinthecity
10 ай бұрын
Thank you for this great video. Are different guages of ROUND wire made the same way by passing the silver through this mill? I wish there was a video on that too please ❤
@christina6656
7 ай бұрын
Unfortunately you cannot make round wire with a rolling mill. Instead you can take scrap silver, use the rolling mill to roll out square wire and then pull it through a draw plate to make round wire. 😊
@fariigemsmineralslapidary8744
7 ай бұрын
Amazing ❤
@Elites-asthetic
3 ай бұрын
Great video very informative If you can help me I’m having trouble making gold wire I can only get to 2mm on the mill If I try the 1.5mm track it messes up I find it difficult to get the wire same wide has the track on the mill for 1.5mm
@LilliSkog
Жыл бұрын
Brilliant video! I am so grateful I've found your channel 😊I'm curious, did the lace fabric work?
@TheArtOfMetalsmithing
Жыл бұрын
Hi Lilli, thank you so much! 🥰 I hope you'll find my videos helpful and interesting. This lace fabric didn't work unfortunately, it was a very poor fabric and made a complete mess. I think I've seen people use the lase in the past, but it's probably much better and strong fabric, this one was very old, too ;)
@LilliSkog
Жыл бұрын
@@TheArtOfMetalsmithing Okay, good to know! A strong cotton would probably be better, like from a lace curtain. I've played with the idea myself, but have't even started learning silversmithing yet xD One day, thoguh!! And your channel has really sparked my motivation to get started - thank you for all the videos and hours you sped making them =)
@nobunk1234
11 ай бұрын
@@LilliSkog I took a class once where they used lace edged paper doilies and that seemed to work 🙂
@abbywebster8343
Жыл бұрын
Funny moment when the student introduced herself! 😂
@TheArtOfMetalsmithing
Жыл бұрын
I'm happy you enjoyed it 😄
@SC-bg8wf
10 ай бұрын
I see you sandwiched your steel pattern between pieces of softer metal, as you know this essential to avoid damaging your rollers.
@guntherclemenz7416
4 ай бұрын
You are a very good explaining metalsmith!! Is the rolling-mill of pepetools very expensiv? Günther Clemenz, Germany
@byulbet9492
Ай бұрын
Thank you for this informative video! Do you think it would work to turn round gold filled wire to half round? Or is it not a good idea since its not true gold but GF! Unfortunately, i couldn’t find any half round GF wire that ships to EU.. Thank you!
@KrakenCasting
9 ай бұрын
Very handy! Is the annealing process similar for copper alloys?
@danielleburr7233
5 ай бұрын
Do you have to pickle it each time you anneal it? Just seems so time consuming
@lizw2853
6 ай бұрын
Thanks for showing what didn’t work.
@Susanarylander
Жыл бұрын
GREAT video in every way Basia! Love the tips… the pictorials and the humor! Thanks! A question: Do you pickle and dry off between anneals and rolls? Seems senseless to pickle amd add possible moisture to the equation but your silver looks so clean each time I’m assuming maybe I should?
@TheArtOfMetalsmithing
11 ай бұрын
Thank you, dear! I'm glad you enjoyed it ❤️ I pickled the ingot after melting and then I only quenched it after each annealing. I was drying it off with a towel each time as well, before putting it through the rolling mill. I think, perhaps as an extra step - to make sure it's perfectly dry - you can heat it up just a little to make sure it's completely dry before rolling it or storing it away if you're worried the moisture that's left may cause some damage
@Susanarylander
11 ай бұрын
@@TheArtOfMetalsmithing thank you Basia! As always great video. I also miss your “Tips” series. Hoping you will come back with some at some point!
@TheArtOfMetalsmithing
11 ай бұрын
@@Susanarylander I have gathered some new ones and will make a new video in the near future 🥰 I'm happy to hear that you enjoy them
@Susanarylander
11 ай бұрын
@@TheArtOfMetalsmithing yay!!! They are AWESOME. I even re-watch them from time to time.
@romanbolomsa3723
9 ай бұрын
Удачи красотка))
@JohnDoe2.01
Жыл бұрын
Ummmm ...... how long have you been experiencing these duel personalities? Let me see if I can get that other guy to give you the name of a good psychiatrist 😂
@TheArtOfMetalsmithing
Жыл бұрын
hahaha, no need! We are very happy the way we are, right Basia? - Yes, of course, Basia! 😄
@JohnDoe2.01
Жыл бұрын
@@TheArtOfMetalsmithing 🤣
@Mass-jab-death-2025
Жыл бұрын
Who is your new assistant with the glasses Basia ? She is very attractive and almost stole the show from you.
@mili9808
Жыл бұрын
😂❤
@silvycat8975
Жыл бұрын
Thank you for this nice video 😊. Can I ask you which is the thickness of the metal sheets and how much do I need to tighten the rolling mill? In other words: which is the correct pressure?
Пікірлер: 55