Thanks, Serge. That’s definitely next level audio. I’ll have to give it a try in my next video. I like the idea of having a consistent sound across videos.
@Serge1913
3 жыл бұрын
It does make a difference!
@PlasteringForBeginners
Жыл бұрын
This was a great video. Well explained throughout...thank you!
@KrystleColeArt
8 ай бұрын
Thank you, this video was very helpful!!
@DenisBTV
11 ай бұрын
Thanks! Nice technical details about the loudness. Still, your intro is a bit louder than the voice: I move the volume up and down in your videos before and after the intro.
@StupidRaisins
3 жыл бұрын
Thanks for the advice, Serge! I wish more creators paid more attention to their audio. It can get really annoying sometimes when the video gets really loud after being very quiet.
@Yustiniya1
Жыл бұрын
Very useful. Thank you!
@AldenAranjo
3 жыл бұрын
Nicely explained...
@MyClutteredGarage
3 жыл бұрын
This is great, Serge. I'm totally confused but I'll definitely save this video and follow it step by step for my next upload! Thank you. -Ed
@AnimeDiet
6 күн бұрын
Thanks for this video. So, I have used this technique a few times now, but one thing I can never figure out is how to make sure of the final True Peak measurements, if you happen miss the playback reaching the end of the video. Sometimes I will be multitasking, instead of just sitting there staring at the meter (while the full video plays in the background). Then the video reaches the end and loops and it clears the data. Afterwards, I have to start over again. Any fix for this?
@mrwintoe
3 жыл бұрын
This is THE MOST HELPFUL video I've ever seen on setting audio levels in Final Cut Pro! You're a genius!
@SammyandTommy
3 жыл бұрын
Another great tutorial! 🧙🏻♂️Appreciate it Serge! Will be implementing this in upcoming videos.
@ARayMaddy
12 күн бұрын
THANK YOU! I made notes on this and got 100/100% results. Since I'm a writer / producer and engineer of my music I did notice something. I thought I was going to have a bunch of unwanted hiss/noise from using the limiter but it was ok. Since my music is COMPRESSED before adding and syncing it up with the scenes I noticed my output level in FCPX is AFTER to Meter/Limiter it was running at -6db after proper adjustment and tested on KZitem. So in a nutshell I re-tested my video sent out to KZitem with output level at -6b without the Limiter etc and achieved the same 100%/!00%. I wouldn't recommend this to other video folks if they don't have exact specs on their audio but will work great for me since my output studio audio is always the same...Thanks for you help so I would be able to get accurate tests!!!
@ColorCodeio
Ай бұрын
Incredibly useful. Thank you.
@TesLatino
7 ай бұрын
No matter how many videos I watch about this topic, I still can't for the life of me understand why all the content in KZitem sounds significantly louder than broadcast TV. I watch KZitem mostly in my living room's TV connected to an ONKYO home theater. If I leave my sound system at the same volume as when I watch TV, but switch over to KZitem on the Smart TV, I have to bring the volume down on my home theater from about -12 dB to around -30 dB or my neighbors will hear my TV from their living room.
@mdg2seasia
Жыл бұрын
Is there a way to get these values without having to play through. This get time consuming, when you have to readjust several times, and are dealing with longer videos. .
@daSilvaRosa
2 ай бұрын
have you found a solution? I have multiple long videos to normalize
@dannypgrizzle
10 күн бұрын
Great tutorial, but I am confused by one thing: How do make the Analyzer meter retain LUFS-I and True Peak measurements after the video play?
@itsPhillipStaples
9 ай бұрын
Serge please answer this question. After the playback for the mutimeter is done, everything goes back to 0 and i cannot capture the numbers. how to stop this?
@sasculptorakkadian6862
8 ай бұрын
Same here….
@kayblack8822
3 ай бұрын
@@sasculptorakkadian6862any luck finding the solution to this ?
@topicruben
2 ай бұрын
Amazing! Thank you so much, Serge for this great tutorial!
@AJCoReTV
3 ай бұрын
Thank you… this was easier in davinci, but I am on FCP now.. 🎉
@SammyC27
4 ай бұрын
so confused. Why does this guy say audio should be set at between 0-6DB then?! you say 12-20 kzitem.info/news/bejne/rWeQm4KponNinII
@kevinhill.8
2 жыл бұрын
I'm new to FCPX, so this may be a real noob question, but how do you access the level meter in the lower right at 2:22? I subscribed and turned the bell on, btw! :)
@Dollectable_Dreams
5 ай бұрын
In another video of yours you set some of these levels, differently. With different values. I've already set the levels following the other video and now I should probably have to change them to follow this. There are so many changes and things that you can do that it really is overwhelming. You do one thing and then discover you should do it differently after having applied the change to all video. :)
@AJCoReTV
3 ай бұрын
Check which is his “newer” video on topic & follow that advice.
@garudasomanna
2 жыл бұрын
Good morning Serge. I am into making Christian song videos and am deeply frustrated in this matter: the audio of KZitem videos we create sounds so well on all devices except one: mobile phone speakers where the volume is reduced! I will use your suggested method and hope things will be sorted out! One doubt exists in my mind: does the browser you use affect the audio quality of the uploaded videos? Would using Google Chrome instead of Safari help matters? Actually I wish you or someone else would bring out educative videos upon this matter at a greater depth. Anyway, thanks for this video. I have never considered FCPX as the place I could normalise levels of my audios. Have a nice day Serge. You are one on your own: excellent and crisp presentation.
@thatmemoryguy
Ай бұрын
This is REALLY helpful and clear. Thank you!
@sasculptorakkadian6862
8 ай бұрын
I’m using the multimeter just like you said, but at the end of my 40 minute video everything just drops down to -70…it doesn’t show me the overall levels at all…what am I doing wrong!?!?
@VincentBova
4 ай бұрын
I'm having the same issue.
@kayblack8822
3 ай бұрын
Any luck finding the solution to this ?
@VincentBova
3 ай бұрын
@@kayblack8822 There is definitely a bug with the plug-in. I'm not sure if the FCP update fixed it, but I ended up buying Youlean Loudness Meter Pro, which is EXCELLENT. Well worth $37. Good luck!
@daSilvaRosa
2 ай бұрын
same problem @Serge1913
@SomnathNagawade
3 жыл бұрын
Great learning Serge as always. Can you make episode on how to record, clean and create VoiceOver in FCP please ?
@ProfSimonHolland
3 жыл бұрын
very useful...thanks Serge. ... just subscribed
@vaexperience
3 жыл бұрын
Brilliant one. Can you make a video on composing the background audio and voice-over audio so it's just right? I struggle to make the background audio just loud enough, perhaps you have a go to model for approaching this?
@Serge1913
3 жыл бұрын
Honestly, I just do it by listening to what sounds right
@truongnguyen7552
Жыл бұрын
goal: -16 LUFS true peak: -1.5 decibels
@MANaboutTOOLS
3 жыл бұрын
Short and sweet! Thanks Serge!
@EricB03
Жыл бұрын
love this video and just got into FCP and your videos are helping. I subbed and will be watching more. One question though when you are playing back to get the levels can you scrub or do you have to let it play though at normal speed? I am playing normal but wanted to check. thanks.
@ArseniiSavitckii
8 ай бұрын
if I could like this video more then one time!!!
@elams1894
3 жыл бұрын
Thanks Serg! The exact video I was hoping for! Keep them coming, great channel!
@robstravelsadventures
Жыл бұрын
Great video. You explained this so well and now I can adjust my audio correctly (instead of increasing the DB). I tested with your instructions on a few clips and it is night and day the audio. Thank you so much!
@TheCuriousYogi
Жыл бұрын
This is brilliant - thank you! If i have a 30min video and I'm running the audio inspector, is there a way to FF this vs wait for the whole audio duration as it inspects :) TY!
@AndrewLazarevBlog
Жыл бұрын
Compressor + Limeter + Adaptive limiter
@jeremyfreetoroam
2 ай бұрын
Oh great, now I have another huge task to do before publishing my videos!!!😅
@Serge1913
2 ай бұрын
Sorry
@jeffdowns5996
2 жыл бұрын
Of all the people who I have watched on using FCP you are the best. Keep up the great work! This tutorial on loudness was exactly what I needed for my project.
@DeviDalyYoga
2 жыл бұрын
Excellent tutorial, Serge - thank you! A question - to equalize the volume in a 5-minute song clip, would you choose compressor or limiter?
@thickymcghee7681
2 жыл бұрын
Serge M. or Colin Farrell wearing a mask?
@josecarlosr6317
Жыл бұрын
Thank you Serge! I was so discouraged to edit my videos just because of the audio editing which always gave me a headache. This tutorial is awesome!!
@DavidListenMentalHealth
5 ай бұрын
Awesome. Thank you!
@aloykitty
Жыл бұрын
Thanks! Meow! :D
@tv-qx8dr
3 ай бұрын
thanks bro :)
@fumiyakinoshita8918
Жыл бұрын
thank you. you saved my life
@thatonemindfulguy3724
3 жыл бұрын
Nice one serge !
@Ducanralf
3 жыл бұрын
Cool Serge, you always read my mind.
@Serge1913
3 жыл бұрын
Glad to help!
@hmi30noche
Жыл бұрын
It’s great thank you
@dappercreator7410
2 жыл бұрын
Why KZitem is the best
@IRLVaporwave
2 жыл бұрын
great tips, will remember to reference this stuff when I upgrade my stuff some day!
@JoeCastellon
2 жыл бұрын
Brilliant video! I had just watched Curtis's videos and was wondering how to apply this in FCP. Thanks Serge!!
@Petesmotoadventure
2 жыл бұрын
I keep learning more and more from you. As a motorcycle content creator audio is a constant source of headaches. With all the extra noise components it can be a real bugger to keep consistent. Thanks.
@pejeickx9562
Жыл бұрын
Great video! I have tried with a couple of videos. On one video however I have -16 LUFS but true peaks only on -3.0 dB. Is this ok or should I upper the output level to reach -1.7 dB ?
@chipcurry
Жыл бұрын
Very good work. I had never heard of LUFS. Been in the business for quite a few years. Thank you
@WheresMyPencilUK
2 жыл бұрын
This is great going to try it thanks. 👍🏼
@hollysoapmaking
3 жыл бұрын
Thank you! This was so helpful!
@Serge1913
3 жыл бұрын
Happy to help Holly!
@webbbeo
Жыл бұрын
BIG THANK YOU!
@GuillermoandSarah
2 жыл бұрын
Thanks for your videos!
@PeterKaitlyn
3 жыл бұрын
I generally make any dialogue or talking to around -6 db and have background music or sounds float around -12 db. I sometime double the dialogue tracks to make the sound of the voices thicker. I don't know why this does what it does, but there is a definite difference... presence... to speech tracks where I do this.
@shakesnbake
Жыл бұрын
Thank you
@beardawgstudios
Жыл бұрын
This video was soooooo helpful! I wish I had started doing this earlier. I just did it to my most recent edit and my gosh does it sound better!!!!
@sdtimeless
3 жыл бұрын
100 likes 👍🏼
@Paul_Uhl_
2 жыл бұрын
This is the best explanation of this I've found. Thank you!
@eduardo_corrochio
2 жыл бұрын
There's a KZitem playlist that I compiled for myself from other peoples' existing YT videos, and it is a mix of songs and movie clips. When played, the volume changes from clip to clip; some tunes are soft while a few others play quite loudly; also, the dialogue/movie clips' audio runs the gamut from loud to very quiet. I was wondering if there is a way somehow to change the volume so that most of the videos don't have dramatic differences in sound, and if this can be done in KZitem itself (without using outside apps or software). Thank you.
@DroneKingsInDarwin
3 жыл бұрын
I’m going to need to watch this a few times but looks simple.
@sasculptorakkadian6862
7 ай бұрын
Ugh, this just doesn’t work.
@AJCoReTV
3 ай бұрын
Make sure the limiter / compressor is above the meter in the inspector window!
@androstern
3 жыл бұрын
You helped me out with two of your videos already so here goes my subscribe good fella!
@mariahakinbi
Жыл бұрын
Hey Serge! How do you level out all of the audio while keeping the outro music up? (I'd like to increase the background music as the video fades out.) Should I leave the outro music out of all the leveling modifications? Thank you!
@zoecheng2756
10 ай бұрын
I enjoy watching your videos. Thanks Serge 👍🏻
@murderhill1947
3 жыл бұрын
I've been waiting for this topic, even thought about requesting it from you. Now to try it out. Thanks.
@onekeiway
2 жыл бұрын
Finally - short and sweet, and effective for FCPX! Thanks Serge.
@storyisgreater
3 жыл бұрын
Love learning new things. Thank you!
@hoodaffairstv
3 жыл бұрын
Great video 👌🏽
@ALWResearchTeam
3 жыл бұрын
Thanks for making this video. This will help me sort my voiceovers to location recordings. 🔊📢😎😎
@Serge1913
3 жыл бұрын
Happy to help!
@dirtydirtmcgogurt
Жыл бұрын
Thanks for this video! Been having issues with this for awhile now.
@BarryMaskell
3 жыл бұрын
Excellent - most simplistic explanation of an over complicated topic
@johnnydee7480
3 жыл бұрын
My saved compressor setting in Final Cut is called Serge.
@jerclarkedotorg
Жыл бұрын
Great video! You blew my mind several times!
@SoNowWhat
3 жыл бұрын
Wow! Great job! I didn’t know anything about this topic !
@DansplainingVideo
3 жыл бұрын
Super helpful information, thanks!
@pathegartyfilmssongs9487
7 ай бұрын
Thank You Serge, very clear and easy to understand.
@kaneborchert9140
Жыл бұрын
Thanks brother, very well explained
@OnlyThomasHayes
2 жыл бұрын
This made the sound of my video sound even more balanced and professional. Thank you for uploading this! I subscribed.
@dekuanstudios8457
3 жыл бұрын
That was definitely some useful information. Thank you
@mohammadalanazi4977
3 жыл бұрын
Wish you all the best man.
@philvfilms
2 жыл бұрын
A massive help thank you so much
@khamphausa5537
3 жыл бұрын
Thank you so much for all your video
@MK-uo7hk
2 ай бұрын
Thanks A lot!
@Serge1913
2 ай бұрын
Happy to help!
@PetrSalz
3 жыл бұрын
Hi Serge, my regular built-in green meters in FCPX show peak values that are about 12 dB higher than the values I see on the Multimeter set at True Peak. In your video the meters seem pretty much the same. Any idea what could be causing the difference? As far as I can see I am using the same settings of the multimeter as you are.
@PetrSalz
3 жыл бұрын
Solved this! It turns out that if you increase the volume of the compound clip in the audio track, that increase is not reflected in the multimeter. When I reduce the volume change to 0 dB in the track or in the inspector, the two meters are equal. So your method with the limiter is really the way to go ;)
@johntbd
3 жыл бұрын
Thanks Serge, this one is very helpful.
@fanfan9768
3 жыл бұрын
What is the number in an audio meter? Volume?
@onemoretimetexas
3 жыл бұрын
Thank you Serge. As always, concise and understandable and very helpful.
@enableliving
Жыл бұрын
Great video - thank you very much
@Jazzbeau
3 жыл бұрын
Another excellent and very helpful vid!
@babawawayoyo
2 жыл бұрын
This is amazing and SO helpful!!
@MrRobertC
3 жыл бұрын
Great video. Important subject matter not known by most, presented in a short concise manner. One of the best instruction videos and I rate 5 stars. I am grateful to Serge
Пікірлер: 128