This vid is awesome! I just bought some gross looking hydroflasks for 5 bucks from my schools lost and found sale and thank god I found your video.
@MakingMadeSimple
2 жыл бұрын
That's awesome!!! I'm sure you're gonna do great when it comes to painting them! Be sure to take time 😃
@StevenCastaneda
Жыл бұрын
Love the detailed steps. Thanks for the video. I’ve got a 64 oz hydro flask I plan to restore.
@MakingMadeSimple
Жыл бұрын
Thanks a ton for watching!
@Tonythebanished
Жыл бұрын
You are literally a life saver man!
@MakingMadeSimple
Жыл бұрын
I'm glad the video helped. Thanks for watching!
@jdmsir231
Жыл бұрын
Wow thank you I have a hydro Flask that I still like using but doesn’t look appealing with all the dents and chipped paint but I’m not ready to let it go I’ve been wanting to bring it back to life with some TLC but just didn’t know what grit would be best and the type of paint to use but thanks for the awesome step by step guide .
@MakingMadeSimple
11 ай бұрын
Sorry for the delay here! Personally, I think any verathane product would work well! As for grit, I'd say working your way up to 220 or 320 would be fine
@henrysmifth536
2 жыл бұрын
The drop just gives it character🤣🤣🤣🤣
@MakingMadeSimple
2 жыл бұрын
Haha, I love your perspective, thanks for being so positive!
@davideastham
3 жыл бұрын
Great project. Thanks for sharing !!
@MakingMadeSimple
3 жыл бұрын
Thank you very much, David! I might do a quick update at some point in the future in which I'll be more careful with the bottle. But for now, the steps and logic in this video should still apply. Thanks for watching!
@MeMollyK
Жыл бұрын
How long did you wait between painting and sealing? Is it okay to seal it if it’s still a bit tacky?
@MakingMadeSimple
Жыл бұрын
Sorry for the late response here, I just saw this. But yes! I normally wait 15 mins or so. It's a tiny bit tacky at that point, but not too tacky.
@online12plus
3 жыл бұрын
you dropped the ball on this one
@MakingMadeSimple
3 жыл бұрын
Absolutely. I think what hurt the most is that I was so close to being done with the project! haha
@kellywentzel5348
6 ай бұрын
Do I need to sand it if the paint is new? I want to paint a freebee I was given!
@MakingMadeSimple
6 ай бұрын
I'd say sanding is always a good idea!
@user-bq2ir5pk6b
8 ай бұрын
Could you have left it bare after sanding, Or is that not a good idea?
@MakingMadeSimple
8 ай бұрын
You can, but I think it's much more likely for the paint to peel off that way
@koric3900
Жыл бұрын
Hello! Can I just use a krylon rust protecter+primer for spray painting?
@MakingMadeSimple
Жыл бұрын
I would think so! I think the paint brand is really just preference, but most of them work similarly 🙂
@koric3900
Жыл бұрын
@@MakingMadeSimple would i still need to put a sealant?
@MakingMadeSimple
Жыл бұрын
@@koric3900 I would, just to ensure it's protected! It would still look fine without one, but it probably wouldn't last as long
@BreezyCale
2 жыл бұрын
This sounds like a dumb question but can you use a different color of paint like a matte or something??
@MakingMadeSimple
2 жыл бұрын
Not a dumb question at all! You definitely can use the paint of your choice! I'd just say to make sure the label confirms it can be used on metal surfaces.
@BreezyCale
2 жыл бұрын
Ok thank you
@mahimashree717
5 ай бұрын
Can you please restore mine as well??
@shawnzimmerman7264
2 жыл бұрын
How does it hold up to washing?
@MakingMadeSimple
2 жыл бұрын
Great question! Great so far! I wouldn't recommend putting it in a dishwasher, but hand-washing has worked well.
@boostedimports7886
3 жыл бұрын
So does it form condensation on the outside of the can now since the old paint is gone now?
@MakingMadeSimple
3 жыл бұрын
Great question! But in my experience, it has worked the exact same way that it did with the old paint. I don't think the paint does much in terms of the temperature insulation, this mostly comes from the actual stainless steel. I still use this bottle frequently, and no issues so far!
@boostedimports7886
3 жыл бұрын
@@MakingMadeSimple thanks I shall try now 👌
@MakingMadeSimple
3 жыл бұрын
Awesome - let me know how it goes!
@raynielfernandez7982
2 жыл бұрын
Mine after I done the process it have moisture outside the can everytime I put ice in the can
@MakingMadeSimple
2 жыл бұрын
@@raynielfernandez7982 that's really strange. The insulation on HydroFlasks comes from the material of the container, not the paint. The paint is just a method of customization.
@mehul34251
3 жыл бұрын
Omg!!
@MakingMadeSimple
3 жыл бұрын
I know! Dropping it was terrible. But hopefully you learned something new from the video!
@mehul34251
3 жыл бұрын
@@MakingMadeSimple ya
@mehul34251
3 жыл бұрын
But the tools you used are not available
@MakingMadeSimple
3 жыл бұрын
@@mehul34251 if you don't have an orbital sander, don't worry! I did mention in the video that this can be done entirely without it. You can sand by hand, and get very good results. And sandpaper only costs a few dollars, if you do decide to do so. Start off with something like 150 grit sandpaper, and then smoothen out the surface using either 220, or 240 grit sandpaper. If you use this method, you don't have to take the paint off entirely. You can just sand the existing paint, and you should be able to paint right over it.
@mehul34251
3 жыл бұрын
Thanks!! well I am Indian so rupees
@soghettu
3 жыл бұрын
POV: You dont have a hydroflask 🥲🔫
@MakingMadeSimple
3 жыл бұрын
Haha, they're great investments, if you ever decide to get one in the future. Definitely pricey, but they do a great job! Also, a lot of the painting techniques used on the bottle totally apply to other things, whether it be used furniture, or random items around the house. Thanks for watching!
@mikeyremy
3 жыл бұрын
Hope you stopped crying now
@MakingMadeSimple
3 жыл бұрын
Haha, thanks Mike! I'll have to re-do the entire bottle soon.
Пікірлер: 47