Easily the best looking low mower I’ve ever seen! My son and I are starting one this weekend, thanks for the inspiration bud.
@boiledtea479
Жыл бұрын
Can you adopt me?
@Ohnur-r4p
Жыл бұрын
@@boiledtea479 lol😂
@badvibes1337
Жыл бұрын
im doing this with a John Deere LT160, ive already lowered it, swapped a manual transmission into it and swapped a Kawasaki FH491V onto it. This is an amazing build and an amazing inspiration.
@swag_gamerfan9602
Жыл бұрын
Hey I’m working on a John Deere 160 would love to get in contact on how you did some of the lowering stuff on your John deere
@swag_gamerfan9602
Жыл бұрын
@@Popcorx who?
@ghoulish-
10 ай бұрын
I am really new to cars and stuff so how would you switch it to a manual?
@badvibes1337
10 ай бұрын
@@ghoulish- its honestly not too hard, if you have a mower and they made the same style of mower with a manual, id buy a used transmission from one of those. for me, i used a 6 speed from a craftsman lt1000 and i had to cut holes in the body for a shifter so its not the cleanest, but you can do it with anything you have avabile
@MrSagerific95
6 ай бұрын
I’m a certified John Deere mechanic and I absolutely love it. I’m in the process of doing the same thing with an stx38, almost identical to the 108. The only thing I would caution is that without the fan shroud you’re running waaaay hotter than you need to be and are probably going to blow head gaskets or drop a valve guide if it hasn’t done so already. They run surprisingly well with a blown head gasket and dropped valve guide. Can’t wait to do this to mine. No
@Theultrazombiekiller
8 ай бұрын
I had an older JD riding mower from the 80s, cant remember the model #, when I was a kid in the early 2000s. My dad and I put a smaller pully on the transmission and that thing literally went 20+ MPH and could burn rubber and damn near pop a wheelie. About 6 months later the transmission was burned out haha.
@floridagirl386
8 ай бұрын
All he did was put a smaller pulley on the back?
@Theultrazombiekiller
8 ай бұрын
@@floridagirl386 Smaller pully and a shorter belt, yes. And it went incredibly fast.
@dahlmasen3084
Жыл бұрын
The stance on this thing is on point!🤘🏻
@GVNOTFAKEREAL
Жыл бұрын
Thank you for making a racing mower the way it should be made, garbage welds and all, keep up the good work!
@mycustomgokart
Жыл бұрын
🤣🤣🤣
@joekrim6557
Жыл бұрын
it handles well becaise of the front neg camber. dont let anybody tell you to change it... very nice work. the welds can be cleaned up. what matters it appears sturdy and looks like it rides great
@wogelkrafts
Жыл бұрын
that thing is just classy ^^
@geartheads3851
Жыл бұрын
Probably every guy in the comments checking fb marketplace for a JD 108 mower right now 😂 Can’t deny I havent looked
@shadowplays5377
21 күн бұрын
How did you know 💀
@tonyradmilovich3154
Жыл бұрын
I don't mean to diss you but my old welding teacher from high school would have sent me back to home room if I showed him those welds! Seriously, it's all good if it holds.
@CoolkidsfromCa
Жыл бұрын
dude i love this thing, how much would you sell it for if you did?
@apollo9277
Жыл бұрын
He’s not selling, just build your own!
@jacobstiffler1833
Жыл бұрын
@@apollo9277 hell yea
@jamesplayz1233
Жыл бұрын
bro hes just asking
@braydenjay9005
Жыл бұрын
@@jamesplayz1233 and he was just answering…
@farmerbrown3768
Жыл бұрын
Yeah, that’s a cool little rig you got their, gives me some great ideas for my own build!
@Itsjustpinchy
10 ай бұрын
We need this in mario kart.
@sed6
11 ай бұрын
This is a must-have for me and my son. Thank you so much for posting this video!
@slothman258
Жыл бұрын
It's videos like this that inspire me to keep building. Now my craftsman is 1 magneto away from hitting 60 mph in its deep blue paint
@natedostalik3538
Жыл бұрын
The mower rollers are so hard 😂
@Fobes
Жыл бұрын
I just got a free craftsman rider with a junk deck and bad solenoid. Might have to chop and lower it like they. My kids would love it.
@keeganmyers7627
6 ай бұрын
I think a 2 stroke dirtbike engine or like an atv engine would be pretty cool in that machine
@guzzilm3
Жыл бұрын
You're a good egg young man, more power to ya!
@HILLBILLY_HARD
Жыл бұрын
That’s a really sweet looking John Deere! I used to race lawnmowers and I miss it!
@GVNOTFAKEREAL
Жыл бұрын
you can still build another one!
@floridagirl386
8 ай бұрын
Working on my 12 year old sons first mower now. I pulled an old craftsman out of the backyard & it has the ic gold.
@ohheyitsjoshhinac495
Жыл бұрын
This dude just made a real life Mario Cart
@ErdeCash
Жыл бұрын
WOW. How the f is that transaxle holding up that much time? Thats crazy. Not 1 broken gear since you swap? Is it getting hot after a while? looks like a beast, congrat :D
@ClutchTFS
9 ай бұрын
Shit boys we might have to meet up when I get my 111 done I didnt realize you guys were in Michigan, im just north of ya in Ontario
@rayinpau.s.a.6351
Жыл бұрын
This is the first time I have ever seen bald tires on a riding mower !
@Blazemiller400
13 күн бұрын
Dang I seen shorts about this build an I always thought is was just a modified drift go kart with a John deer seat and cover
@truckerray7533
Жыл бұрын
That's awesome bud❤️🔥! Job well done👍🏻😃! Replace the pullys & belt with sprockets & chain & add a small racing wing to the back😁! Thanks for sharing. . . .be safe👌🏼
@samnigro1138
Жыл бұрын
Awesome build! How did you lower the front end? I have a Deere 111 that Im putting a v twin in.
@Dread2104881
11 ай бұрын
The real Mario!!!Bro!! Love it my guy
@johnrutherford9454
Жыл бұрын
Awesome build man
@hugotaggert5105
Жыл бұрын
just guys doing what guys do best
@fatmalotfy5870
10 ай бұрын
You should install a bucket seat in it
@Motoman16
2 ай бұрын
i want to make on now so cool 👍
@rylew7403
5 ай бұрын
That things sick I am going to buy a John Deere 108 with a v2 Kawasaki In it
@anthony4x477
11 ай бұрын
thats a nice project. 100%.
@haydengarries
Жыл бұрын
Anyone seeing this, what engine would you recommend for the same 108 he has?
@CERTIFIED331
Жыл бұрын
Should definitely put some slicks on it
@kennylang9727
Жыл бұрын
Amazing bro ! Just got one question, so u don't have break anymore ? I mean u only have a hand brake now ?
@CurtyYt1
Жыл бұрын
I’ve got a 20hp craftsman I’m making a racer out of and I am taking heavy inspiration from this.
@ricechrisey4140
Жыл бұрын
Recommendation don’t break any bolts because you’re never gonna find a replacement part
@ProducersGroupProd
11 ай бұрын
Dang!!!! I love that Thing! 🎃
@demetriusdemarcusbartholom7368
Жыл бұрын
Is it available to purchase the 108 online? I’m having difficulties finding it and the closest I found is a 100.
@JohnElstonFishing
Жыл бұрын
Awesome build. How’d you turn the deck lift into an e brake?
@everettstormy
Жыл бұрын
Its just a lever to pull the stock brake thats built into the transaxle
@UriyZ9mb8e
Жыл бұрын
for our drift mower we rerouted the cable that raised & lowered the deck to the brake on the transaxle
@sequentialed
Жыл бұрын
Could you make a video of how you lowered the front?
@FF-po6gx
8 ай бұрын
Who do you replace those rear axles with? Just another one off of a different mower??
@GraveFighter450
Жыл бұрын
Thing looks fun as. Need to make one of my own
@rustyretired
Жыл бұрын
Whats the top speed?
@mycustomgokart
Жыл бұрын
47mph
@rustyretired
Жыл бұрын
@@mycustomgokart pretty fast, makes me wanna build one more 😂
@HughCrisp-x4m
Ай бұрын
What was the stock mower… does it matter which one you use. If so what is the best?
@AndrewDRoyappa
Жыл бұрын
This thing hard af
@pooparcel
Жыл бұрын
She's a beauty
@samosa3603
Жыл бұрын
when i saw this i almost forgot the world is bad 😂😂( from a french guy 😃)
@heathenprojects2639
Жыл бұрын
Awsome build ive got a jd 110 side shaft mower i will do something with one day
@WalterPidgeonsForge
Жыл бұрын
Dude!!!.. Swap your welding leads +/- when using flux-core! Those welds are scary… Flux-Core doesn’t have to be like that.
@dogcreek-customs5168
Жыл бұрын
As it seems he's not answering anyones comments or questions
@Mattslawnmaintenance
Жыл бұрын
pretty good investment! super cool story
@Memesmith_YT
4 ай бұрын
Where'd you get the exhaust stack? Or make it?
@brandonlight2976
Жыл бұрын
Are you from Northern Michigan? I had a friend that worked for keo
@linus9247
Жыл бұрын
how the f did you just swap the rear, don't you have 4 reverse and one right gear?
@bigbird6022
Жыл бұрын
You flip the axle thing upside down then 180
@FarmFowlers
Жыл бұрын
Yeah but in the video he only flips it over doesn’t do a 180 that’s why I’m confused. I have the same mower and all he does is flips it over.
@FarmFowlers
Жыл бұрын
Did you have to get a different size belt after the pulley swap or did the spring just adapt to the size?
@zachjames207
8 ай бұрын
Sweet bro
@eddied2431
8 ай бұрын
can u use one of these as main method of transpoertation?😏
@honzikbinzik3006
5 ай бұрын
what is the engine made of?
@soupisnotameal4172
8 ай бұрын
Could you drift it with an automatic engine?
@noelrodriguez3520
11 ай бұрын
Where can I find a specimen like this fb marketplace?
@J8ck_hoff
Жыл бұрын
Whats the width on the rear tires ? Im having a hard time finding 18x6.5x8 tires
@jeremiahrios4010
Жыл бұрын
This day and age, go with what you can get.
@firstgenerationfarmer9991
Жыл бұрын
Thing is sweet!
@bmacfo
Жыл бұрын
How much speed can you get out of a stock engine and the pulley system upgrades?
@rarxtkk
Жыл бұрын
i so wanna make this
@chailensessoms546
11 ай бұрын
If I had the stuff could you help me make one?
@khalidmb23
11 ай бұрын
Sooooo clean❤
@Sh00bsCHS
5 ай бұрын
how fast does she go ? 25 ? 30?
@jiezhu290
Ай бұрын
I want one so bad but I don't no how how to build one. Anyone can help me?
@mr_teigen6702
Жыл бұрын
am glad his not gonna be a welder!! but good job
@danielischy9091
Жыл бұрын
What kind of transaxle did you use?
@lukeburritos
Жыл бұрын
Them are booger welds 😅😅
@kappeboman
Жыл бұрын
where did you buy the pulleys ?
@comet047
Жыл бұрын
I'm sure it was like tractor supply or ace hardware or something like that. The harder part is finding the new belt size
@evangann6146
Жыл бұрын
Can you switch the pulleys and belts out for sprockets and chain and use a standard clutch? I'm just wondering
@FarmFowlers
Жыл бұрын
That got me thinking but I don’t think it would work unless you put a torque converter on the front. Since the engine shaft is always moving it wouldn’t work, you wouldn’t be able to stop.
@evangann6146
Жыл бұрын
@@FarmFowlers I was saying a clutch like in a manual car or motorcycle, but a torque converter would do the same thing👍🏻
@evangann6146
Жыл бұрын
Or maybe a centrifugal clutch🤷🏼♂️
@mikes.8823
8 ай бұрын
badass build but RIP spinal cord ur lower back is gonna hurt in ur late 20s
@willlothridge3197
Жыл бұрын
It’s the one welding not the machine
@arzy3119
10 ай бұрын
do yall know any similar mowers ? those are not selling in my area
@GIXUP
Жыл бұрын
What pulleys did you use? Size?
@UriyZ9mb8e
Жыл бұрын
7" front and 1.5" back
@amateurbuilds682
Жыл бұрын
Could you make it street legal 🤔 wouldn’t take it on the highway but would be fun to drive to the store and such
@AnushriSaadhu
10 ай бұрын
Can I order this
@Ron_Masterjohn
Жыл бұрын
I have to leave before I can watch full video. I have 111 so shouldn’t it be the same to lower it?
@Nipon_cak
Ай бұрын
What name product
@dolopo9976
Жыл бұрын
Build more and start a drift league
@RealCrispy_Sniper
8 ай бұрын
whats its name?
@arvin___15
Жыл бұрын
Yo what engine is in that
@LaurenGodmerAsmr
Жыл бұрын
How much would it cost to buy this?
@rasitaesthetic7627
Жыл бұрын
how much hp?
@mycustomgokart
Жыл бұрын
15.5
@KatieStanton-m1y
Жыл бұрын
How much you want for it
@Ron_Masterjohn
Жыл бұрын
A cop see you and write u a ticket for riding it on the rode yet?
@81quevec80
9 ай бұрын
;bonjour jais aissayer de telecharger le note book mais sa m'indique que cette app est une verus donc je les donc pa tele pouvez me donne des nouvelle svp merci :)
@placidobarrios1357
11 ай бұрын
Ven a buscarme❤
@AgentWest
Жыл бұрын
Great build, but a pulley swap is a terrible thing for actual racing. On those the input spins the selectable gear set, then goes to an additional gear that drops RPM by probably 8 or 10 before going to the differential. Those transaxles are not meant for high RPM because they don't use bearings, only bushings. A pulley swap greatly over-speeds them. A better solution would be to bypass that whole reduction gear. More difficult, yes, but way more robust. Side note: 7 to 1.5 belt ratio? Holy carp, you're spinning that tiny input pulley at 16800 RPM! How has nothing melted?!? lol As a side note, the speed selection gear set is easily changeable, so you can tweak gear ratios and number of gears. I believe there are 8 places for gear couples, so typically you can get up to six forward gears, or take out the reverse and get seven. Can get rid of neutral as well for the 8th, but i would not recommend that.
@brandonthompson5400
Жыл бұрын
cruising and drifting on it looks so smooth and flowy, Love the build!
@LC11882
Жыл бұрын
Amazing build! Love the build it’s beautiful!
@zerotosixzero
Жыл бұрын
I just picked one of these mowers up for this same build . I'm not a very good fabricator. But I'm going to give it a shot Thanks for the inspiration
@DesertGeezers
3 ай бұрын
The way to learn is to just do it.
@dancinduck6750
Жыл бұрын
Im planning to do something like this so this is such an inspiration for me man
@1035Ghuraba
Жыл бұрын
post updates! would 100% watch it g
@Oto265
Жыл бұрын
yeah same upload that shit
@Thoroughly_Wet
Жыл бұрын
Had one made from an old cub cadet with a yz490j two stroke in it. Thing was wicked fast and Its what i drove to HS because i never got my license until after lol We didn't use much besides the body, frame, and controls. We got rid of the trans axle and it was turned into a chain drive to accommodate the new engine and trans. Turned the deck lift into the gear selector as well as mounted the clutch to it, making it a grip and rip, turned the brake into the throttle and the clutch into the brake. Thing was fun and could reach highway speeds with the gear ratio we had going on (I forget what the yz had going on but the rear was like a 20 tooth)
@Vicky-ir7eu
Жыл бұрын
💯🔥💥I've got a old free mower and I can't wait to try this!! Thanks for the inspiration and great content!!! Totally epic results !!!! 💯🔥💥
@traepederson6868
Жыл бұрын
This video has cleared up so many questions. Built one and I sorta sucks, but now I found a better one to build. Thank you for this video.
@vr6swp
Жыл бұрын
A ton of dumb fun for short money. I’d call that a big win
@grahamparsons1070
Жыл бұрын
Just epic lads. Probably my favourite video of 23! Light hearted,good fun, nice build. Not sponsored??? Whaaat 🤷🏻🤣
Пікірлер: 293