Disclaimer: This modification is at your own risk, we do not take responsibility for any loss of warranty, insurance coverage or injuries related to this modification.
This is a quick how-to guide on the removal of a 2010-2011 Camaro steering wheel and airbag assembly and how to install a 2012+ steering wheel and airbag assembly.
The following is required to do this modification:
2012+ Camaro Steering Wheel: All models interchange (LS/SS/ZL1)
www.gmpartsgia...)
2012+ Camaro Airbag Unit: 23170890 or interchange
Tools:
10mm Deep Socket
T50 Torx Bit
Breaker bar or impact
Small flathead screwdriver
Long allen key or thin flat tool to disengage airbag clips
Torque wrench
Note:
Watch the video in full before performing this installation and ALWAYS disconnect your battery prior to performing this modification. Failure to remove power has the potential to cause the airbag to deploy.
Music By:
Runaway by Diamond Ace | / diamond-ace-music
Music promoted by www.free-stock...
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommon...
Негізгі бет How-To: 2010 to 2012+ Camaro Steering Wheel Swap
Пікірлер: 153