Reminds me of standing in west varrock bank fletching magic shorts and long bow (u) then stringing em mfs all day.
@kerndesertpreppers1274
10 ай бұрын
Shout out to the RS background music!!
@morphiz
Ай бұрын
I know how much work and effort has been put into this. Good job!🥰👌
@thomasbyrne4116
6 ай бұрын
I'm annoyed with myself for how quickly I recognized this music
@Tail_Squared
29 күн бұрын
Question: I’m super new to resin printing. Are you able to use only IPA to clean prints or is something like resin away a required step before curing?
@15Yolii
11 ай бұрын
can you share the configuration of the impression?
@Jigsaw765
11 ай бұрын
Excellent more short form content to make a an intermediate-to-hard hobby look easy and plug&play
@brookexp4710
Ай бұрын
I have a smaller elegoo resin printer , I love it I've printed so many things 😂
@takeoazuma7185
7 ай бұрын
Hey, I am à total beginner in 3d printing and of course I have à problem. Can you tell me what I'm doing wrong when the mars 4 dlp says "inconsistent slicing and projection exposure" and don't start printing after that ?
@JamieLynch-ry4vp
Ай бұрын
I’m new resin 3d printers. Do you need to have the cleaner and the curing machine? Or do they just make it dry faster and cleaner? What if you just printed it and didn’t have those would it be ok?
@angelv8414
8 күн бұрын
The resin is toxic if you dont cure it
@chickishot8172
7 күн бұрын
Resin is toxic so as far as I’m aware it needs it.
@BrickForceer
11 ай бұрын
That’s the biggest cap in resin printing history. You make it look like it’s plug and play
@dextersamson8286
7 ай бұрын
It literally is plug and play.
@irondolphin1559
6 ай бұрын
Literally is ...
@gianluchavacciofficial8371
5 ай бұрын
I have an fdm, it's really not plug and play, but those resin printers from this view are way better
@InformalPizza
5 ай бұрын
@@gianluchavacciofficial8371it’s definitely more to it then that - for example where do you find these high detailed prints
@Ceryf
Ай бұрын
@@InformalPizzayou pay for them you’re never gonna get a perfect 3d model for free
@TheEndlessConsumption
7 ай бұрын
Tb to choppin trees 🥲🤣
@user-nv4bf2dq2g
3 күн бұрын
Cool!!
@WarhammerJack
Ай бұрын
Do you have to use a computer if so what app/file thing? Or can you use a mobile phone/iPad, if so what apps??
@NAGAYUTE
3 ай бұрын
I need my supports raw-dogged too 👀
@SeijinOficial
6 ай бұрын
Please help me, do you use chitubox V1.9.5? Could you please tell me the print settings?
@zerostatic1209
4 ай бұрын
do we need that two stage cleaning machine?
@techclub8528
4 ай бұрын
Nope, that’s just an ultrasonic. When I say two stages I just mean I clean twice, a normal wash and cure station is sufficient enough
@zerostatic1209
4 ай бұрын
@@techclub8528 so i could clean it myself without machine but the cure station is a must? Is just that I want to buy a cheap machine but I don't have money for more stuff as other devices. That why I'm curious if it a must. Also thanks you for responding 😆
@ReliquiaLaserCraft
4 ай бұрын
what resin did you use for this miniature?
@eggbag4182
5 ай бұрын
Why do many models for resin printers come pre-supported? Does resin slicing software make it difficult to support yourself or something?
@techclub8528
5 ай бұрын
It’s to save time, it can take a little while to put your own supports in, plus too many can be annoying as more to remove causing more marks, too little will cause print fails, so it’s a nice bonus if it’s already supported as somebody’s already done the hard work of checking it prints okay with that level of supports
@Gounesh
Ай бұрын
There’s too much debate on IPA in ultrasonic cleaner. Did you have any problems of fire?
@techclub8528
Ай бұрын
no as there is no heat, i only put the IPA in a separate container, the main liquid in there is water, the sonic waves penetrate the container with IPA then vibrates to clean the print, NO Heat used. Second the vibrations are not enough to heat the liquid to ignite, don@t smoke or put an ignition source next to it and i don't see any problems, no different from using IPA in a cleaner like Wash and cure stations. the vibrations can cause IPA to go airborne but not enough to saturate the air that would ignite, i live in a very humid place anyway maybe if its a super dry low humid area then this could be dangerous. I also use a face fit face-mask / respirator with correct organic gas/ chemicals cartridge so no chance of breathing in the fumes.
@techclub8528
Ай бұрын
to be clear the IPA is in a separate container that i plop into the water in the ultra sonic, then when the print is clean i seal the top and store IPA containers in a fire proof cabinet.
@miguellopez3392
Ай бұрын
@techclub8528 there is heat and ignition involved in ultrasonic cleaning, the cavitation of air bubbles heats up 5000C and ignites even water, bit it's a lot like lighting a match submerged in gasoline, there isn't enough oxygen or heat to keep combustion going, most ultrasonic cleaners are self heating so they can pose a danger if something is damaged or left plugged in for too long leading to the whole unit overheating and becoming a fire risk without liquid water in them.
@CloroxThePotatoPriest
6 ай бұрын
After actually doing multiple prints cleaning is not that easy, nor does just yankong it off look that clean
@peypey_it_is
3 ай бұрын
I just realised that it's mich smarter to clean without Support because less Resin will get into the IPA. Damn.
@miguellopez3392
Ай бұрын
I use 2 separate baths of alchohol, one to rinse and take off a majority of resin, so the seconds tank can wash more effectively.
@MrRaashby
5 ай бұрын
What are your cleaning stages? What’s in the ultrasonic cleaner?
@techclub8528
5 ай бұрын
Normal water in the ultra sonic but I put my model in a pickle jar with 99% IPA that goes into the ultra sonic. I also do a pre wash in used IPA to get most of the resin off before doing my final wash in clean IPA
@MrRaashby
5 ай бұрын
@@techclub8528 thank you friend!
@sbt99.thailand.24.7
2 ай бұрын
แบบนี้ ตัวเท่าไหร่หรอคับ ❤ รอผมแปบนะ
@marumisu9560
3 ай бұрын
What does the IPA, ultrasonic, and curing do? It looked a lot softer and less shiny after. Is that what it does?
@techclub8528
3 ай бұрын
IPA cleans the uncured resin from the surface of the print
@marumisu9560
3 ай бұрын
@@techclub8528 interesting
@skrumpf6793
8 ай бұрын
How do you deal with fumes?
@techclub8528
8 ай бұрын
I am in the garage so mostly vented out the drafty garage caps in the door etc to outside. when I am in there and working on printing I wear a 3M respirator with chemical filter attachments.
@kokio3416
3 ай бұрын
Hello, I am new at resin printing and am a little bit scared, do you think 3d printing is worth the risk because I heard a lot and am not sure if I am safe anymore I wear mask and gloves and I try to be very careful but I have read many horror stories, is resin that big deal , do you have any health problems from resin, if a spill happens it will be a huge problem for my health?
@miguellopez3392
Ай бұрын
If you are a patient person and know how to follow a procedure then it should be no problem handling resin, even spill aren't an issue if you are equipped, resin fumes are bad, but ipa that has uncured resin in it and is rapidly evaporating is very toxic for you and needs to be ventilated emidietly, only time I eve got a headache was from not being able to vent the fumes fast enough after force drying a cleaned print with a air gun, now I do that outside.
@starseed3008
3 ай бұрын
Stl?
@muhammadfaisalemir3172
2 ай бұрын
#324 MAINAN ANAK MAINAN 😂🇮🇩
@alphaswain9588
7 ай бұрын
my mars 3 doesn't print at all, what the hell???
@lawy_Studio.1
7 ай бұрын
Hello 👋 if you need a 3D artist who can help you create a custom model with Stl files for printing! I can help you with that.
@alphaswain9588
7 ай бұрын
@@lawy_Studio.1 nah man I returned that shit, so annoying
@that1dude36
6 ай бұрын
😂
@t1msguitar
2 ай бұрын
Soooo, dumb question, I know nothing about 3d printing but was wanting to get one for DND minis and stuff. You wearing gloves and cleaning them, is this stuff hazardous or detrimental to your health? I'm not getting into it if there's chemicals and stuff. I already had cancer once, no thank you...
@techclub8528
2 ай бұрын
The Resin is toxic to get on your skin and will cause irritation, toxic to the environment too, once cured it’s okay not a problem to the environment or your skin. Cleaning I am using 99% IPA so there is another chemical that is potentially hazardous, flammable and most likely dangerous to health if breathed in fumes. I always wear a face mask with chemical cartridge and nitrile gloves, I also use the printer in the garage to avoid funes filling my house, Now the big debate online is if the Resin smell / fumes is dangerous, some say no I say yes and always use a respirator. Small scale printing using the correct PPE you should be fine, scaling up to everyday usage and long term daily exposure then you might want to think extra about ventilation systems and protective equipment.
@t1msguitar
2 ай бұрын
@@techclub8528 thank you for the information.
@lordbeerus462
9 ай бұрын
I peed
@kennyhagman840
4 ай бұрын
Osrs music
@jenlester9306
29 күн бұрын
I've never done this but I'm sure it's wSy harder than u make it look.... Easy peasy 123 I'm sure it's like easy my mf arse
Пікірлер: 66