for blender. Instead of having to fix each of the cut off faces manually, you can just turn on a pre-installed add-on in blender called “3d print tool box” it has an option to repair models the same way as fusion 360, in that case it would automatically fix those faces. and of course it can be used in any of the other steps to fix the model instead of using fusion. Though sometimes it doesn’t always work perfectly so always check the result and redo it or manually do some of it and it will complete the rest etc.
@Lukis3D
Ай бұрын
wow thanks for that great tip! that'll save so much time
@spacehunter2018
Ай бұрын
Yup yup, blender is the GOAT, and u can just model ur own landscaped using ANT landscape generator
@mithileshpakala9793
14 күн бұрын
Could you please explain how to do that. I never used Blender before, I am trying to learn.
@moisted
9 күн бұрын
There is no “3d print tool box” addon
@spacehunter2018
9 күн бұрын
@@moisted haven’t checked blender 4.2 however in 4.1 there was an addon called 3d print toolbox
@Chris-1974
Ай бұрын
I live in the Netherlands so I can just print out a flat square and be done with it.
@Lukis3D
Ай бұрын
😂😂
@infinityviews433
Ай бұрын
Frfr we don’t have any mountains very bad 😢 I want those big high mountains
@dcmol83
24 күн бұрын
no it has to be below sealevel so you can actually just not print anything
@ducomaritiem7160
21 күн бұрын
I tried, but livingin the Netherlands so only errors... and trying print a city: only queries errors from Google... 1 hour of trying down the drain
@slotcarBench
20 күн бұрын
same here, only flat in Holland , you waisted my time
@cesarramirez7316
12 күн бұрын
Found this through Reddit. Bro, this is amazing. I just paid someone to make me one of a city for 12 dollars. Oh well, we live and learn. Thank you !
@Lukis3D
12 күн бұрын
your welcome! The methods i shown here are free and more for beginners, so they‘re gonna be less detailed than paid ones.
@elongated_muskrat_is_my_name
18 күн бұрын
A few years back, the English Environment Agency made its lidar data open-access so for a lot of the country you can get heightmap data down to the nearest 1m or less, which is cool. Like I can see my house and the particular shape of its roof.
@rcbodyshopfr
17 күн бұрын
In France you have the same with impressive resolution 👍🏼
@antongoulko6641
Ай бұрын
This was the most straightforward and clear tutorial that I've seen in a long time!
@Lukis3D
Ай бұрын
thanks! i tried not to make the video too long
@sverkersvensjo9306
18 күн бұрын
Wow. If only all other KZitem tutorials had been as clear and useful as yours. Great Work! Thanks!
@Lukis3D
18 күн бұрын
your welcome! glad you liked it!
@mrfoameruk
Ай бұрын
it might be cooler if every 10th layer had a different colour (if printed flat) , so when looking from above you would get contour lines.
@SinanAkkoyun
Ай бұрын
Buy some gradient PLA (gradient along length of filament) and you got an extremely smooth gradient!
@dmiller7758
10 күн бұрын
Funny you should mention that I developed a terrain model for my students doing that just a couple of weeks before your comment. I found it better to determine heights and layers to make the contours useful increments, but for purely a demonstration of contours, every 10 layers would work.
@mike1261
20 күн бұрын
I've manually modeled a number of topographical areas, some with buildings, in AutoCAD. Some models took several days to complete. I must say these methods are many times faster and easier, however they don't have the same level of detail. These tools are most definitely worth it for most folks. Thanks for the information!
@ForgeCoreCo
17 күн бұрын
Yeah the details on these are super basic. Paid versions are 100x better
@ultraolfahd5366
27 күн бұрын
Really love the video. I searched much online but only found paid content or confusing tutorials. Your explanation is pretty straight forward and clear to follow
@Lukis3D
27 күн бұрын
thanks man, glad that it helped!
@TheOfficialOriginalChad
Ай бұрын
When printing terrain, print it on its side. Nature does a great job at preventing overhangs! *particularly steep mountains MAY have you trouble, but zooming out will get you more mountains and no problems 😉
@amaterasu6888
Ай бұрын
Hey Lukis , I normally don't comment on youtube videos , but this time I just wanted to thank you for all of your videos especially the drawing ones on the Lukischannel , your drawings have impacted my childhood, and right now I want to start drawing again after years of neglect, and i just happen to remember you and your channels, Thanks again for all the memories !
@Lukis3D
Ай бұрын
Hi there Amaterasu6888! I’m glad that i could inspire you and many other young artists back in the day! Comment like this makes me whole, and motivates me to keep doing what I do. In fact, i wanna thank YOU for watching my videos and for taking the time to write this comment. It’s just mindblowing to think that my viewers are now young adults. Thank u so much for checking out my channel again and have fun getting into drawing again!
@coreymartin9630
3 күн бұрын
In most slicers you can add geomerty to parts, there's a bunch of primatives that can be added and combined with models easily so you don't have to use a CAD program to add a base to your model
@Lukis3D
3 күн бұрын
surely, but using CAD is helpful if you want that flexibity to create any type of base you like. Of course, i made a basic base here as an example
@fight2flyphoto
27 күн бұрын
My dude. You are a life saver! This tutorial is *fantastic* and the fact you included those other 2 resources makes it even better. I've been trying to do this for the last 3 weeks and all the other tutorials I could find absolutely sucked. THANK YOU!
@Lukis3D
27 күн бұрын
your welcome! Hope that it works out for you, and happy printing💪🏼!
@andyspoo2
Ай бұрын
A really good tutorial. The only thing I'd add is selecting 'variable layer height' in your slicer will produce a better quality print when it comes to curved surfaces like the terrain.
@martingerken7094
Ай бұрын
this video killed it - Google Maps API is beyond limit
@fight2flyphoto
27 күн бұрын
Right? Grrr!
@wannehaves
Ай бұрын
I haven't tried it yet, but I like how you explained it in your video. 👍
@Lukis3D
Ай бұрын
thank u! the first 2 methods are super easy and it would make a great gift👍🏼
@robertbrockman5029
Ай бұрын
I agree. This is one of the best simple/fast tutorials I’ve seen in a while. I had a rough model in blender in less than 10 minutes.
@philippl3989
Ай бұрын
Very cool, tried the Blender method about a year ago, but fail due to my unfamiliarity with the software at the post-processing step. That solves that 👍
@Iskelderon
Ай бұрын
Thanks for that tutorial! It's perfect for a project I was planning to make for next year, where I'd need rectangular city layouts for population sections inside a large space station (elements inside a large transparent plastic tube).
@Lukis3D
Ай бұрын
your welcome man, and Good luck with your project!💪🏼
@rayman301030
6 күн бұрын
Lukis so goated for this. Thank you sir
@Lukis3D
6 күн бұрын
your welcome man! And good luck
@vCtrlAltDelv
Ай бұрын
Love that multicolored terrain print!
@loopymind
Ай бұрын
Finally! I've been looking for this for quite a while
@treidprint
12 күн бұрын
Very good tutorial. Thanks for the information.
@Lukis3D
12 күн бұрын
your welcome!
@MrYabbie
Ай бұрын
Awesome video - have wanted to reproduce my local mountains. Thanks for the video!!
@Lukis3D
Ай бұрын
your welcome and good luck!👍🏼
@matthewprice5749
15 күн бұрын
Amazing tutorial, thank you!
@Lukis3D
15 күн бұрын
your welcome!
@fight2flyphoto
26 күн бұрын
I'm trying this now, step by step, but when I switch to edit mode, the map image, drops to the flat plane below, making the buildings and other elements float. Any idea what I'm doing wrong?
@giovanbattistacastiglione529
19 күн бұрын
Woww non conoscevo questa possibilità. Grazie! 😊
@Lukis3D
19 күн бұрын
Your welcome!
@chrisepps3032
17 күн бұрын
I keep getting "search failed: OVER_QUERY_LIMIT" error when trying to use touch mapper. Anyone know how to fix this?
@cincinatti6969
16 күн бұрын
Yep same here! Google says it means you send too many requests to google maps, didnt even use google maps today lol
@flippy9133
Ай бұрын
Super cool, wish my home town was 3D on google maps
@pyrhockz
Ай бұрын
Great stuff thanks for sharing !
@cesarramirez7316
12 күн бұрын
If possible, if anybody has any tips to make these models with higher quality, please comment below
@Doyle69
Ай бұрын
Some reason any browser I use it says Google maps cant be loaded correctly, do I own the website 😐
@alissonfranco
Күн бұрын
here as well
@petermcandrew7787
14 күн бұрын
Matterhorn is no longer on Toblerone packaging. Because Toblerone have moved their production outside of Switzerland, they can no longer use Swiss iconography or terminology. They also no longer mark the packaging as "Swiss milk chocolate" for the same reason.
@Lukis3D
13 күн бұрын
oh thats good to know, thanks for telling us this!
@lutfijd
Ай бұрын
this is very nice, thumb up and will be doing this, looks really nice.
@Lukis3D
Ай бұрын
thank you very much!
@medtuning
19 күн бұрын
thx so much! amazing tutorial!
@Lukis3D
19 күн бұрын
your welcome! Glad u liked it
@teriyakipuppy
20 күн бұрын
The site is a bit janky. It didn't support some locations. also had trouble loading the maps.
@23-Petr-23
Ай бұрын
Thanks man for amassing guide
@Lukis3D
Ай бұрын
ur welcome! glad you liked it💪🏼
@Bozzzbozzz
Ай бұрын
WOW! nice Video!
@fardouk
15 күн бұрын
Instead of cutting, make a boolean operation with a cube you don't have to close your buildings ;) And extrude on Z, just type E and then Z and you can move your mouse, it only extrude on Z.
@Lukis3D
15 күн бұрын
thank you for the tips!
@ArisMelachroinos
16 күн бұрын
Your video markers are wrong, but thank you for the tutorial, it was helpful!
@JThemelis
Ай бұрын
Omg i cant thank you enough for this
@Lukis3D
Ай бұрын
ur welcome, glad u liked it!
@JThemelis
Ай бұрын
@@Lukis3D “like” is an understatement! I’ve been trying to do this for a month and thought i was failing! I have SO many of these id love to do for my family, of our hometown villages and Greek islands!
@kikepech
Ай бұрын
THANK YOU DUDE!!!
@Lukis3D
Ай бұрын
your very welcome!
@k_DEDb07
Ай бұрын
super cool video. thanks :)
@Lukis3D
Ай бұрын
Glad you liked it!
@mikekiske
Ай бұрын
Thanks for the video.
@Lukis3D
Ай бұрын
your welcome🫶🏻
@wugely
16 күн бұрын
Nice video and thanks for linking the pages. Unfortunately touch-mapper only says „search failed: OVER_QUERY_LIMIT“. Seems like the page is not allowed to use the source anymore.
@Geeksmithing
15 күн бұрын
I am also finding this
@Reglaized
Ай бұрын
Thank you for sharing! Does anyone know how to cut out the waterways? I was thinking that I could select the waterways and extrude them downward. However, the waterways are shown in the format of lines. Solidifying them and extruding downward does not capture the coastline clearly.
@mtd87
17 сағат бұрын
Very nice tutorial! Sadly, the interesting monuments like cologne cathedral are just a monstrous cube - the data imported into blender as well as used by touch mapper are not detailed enough...
@Lukis3D
9 сағат бұрын
thank you! yeah. Better ones are usually not free, and can be quite expensive too.
@rocken8899
Ай бұрын
Great video. I am looking on how to do this for lakes showing the depth of lakes. Do you know if this can be done? Thank you
@twiddledup3d
Ай бұрын
This is so great! Different options, software, love it! … also, how do you get such beautiful Timelapse with your A1 printer. I’ve always wanted to make cool Timelapse with my A1 mini! Thanks!
@Lukis3D
Ай бұрын
thanks so much! ive made a video about how i made the timelapse, you can check it out🙏🏼 Although now i’m experimenting with a new method so maybe i’ll make an update about that too
@twiddledup3d
Ай бұрын
@@Lukis3D Cool! Will check it out… but yes, let us know about newer, cooler, better, ways of doing things too! :)
@salemcripple
17 күн бұрын
No mater what i do, the model isn't manifold. Even with the "make manifold" add on in blender it shows all the building bases as non-manifold
@dialectstat3377
Ай бұрын
Thanks for video. Don't get what is benefit to print on its side?
@Lukis3D
Ай бұрын
your welcome! the print quality is way better and you don‘t get the stepped look.
@dialectstat3377
Ай бұрын
@@Lukis3D could you share a link on high res photo of the print on its side?
@23moneymakermj8
28 күн бұрын
¡Gracias!
@Lukis3D
28 күн бұрын
¡De nada y gracias por los SuperThanks!
@Gixxerfool1
Ай бұрын
Is there a reason it would only elevate some buildings and not others in Blender? The one building I need is still flat while others around it are elevated. Thanks for the great tutorial.
@jpegcoma
Ай бұрын
Very cool! Would you do a tutorial on how to make it multicolor?
@Lukis3D
Ай бұрын
thank you! thats a great suggestion, i’ll try my best💪🏼
@jonathanakaplan
Ай бұрын
@@Lukis3D This would be awesome! Maybe something simple like colors for highway, buildings, water, and nature? Thanks for doing this!
@louisianahighball4705
16 күн бұрын
When using Touch map I keep getting "OVER_QUERY_LIMIT" errors
@ottomuller4948
Ай бұрын
Error: All(!) elevation values are 0.0! This may happen if the DEM source does not cover the selected area.
@SgtMajor82
21 күн бұрын
Great video! Thanks... How long does the larger cityscape take to print on the A1 please?
@Lukis3D
21 күн бұрын
thanks man, glad u liked it! I would say around 3 hours
@jaydeevanhattem6906
Ай бұрын
Is it true you can only download parts of the US? I'm from the Netherlands and the site gives me a message that Google Maps isnt able to load...? Very cool video tho! Would love tot try this with the city I live in :)
@Lukis3D
Ай бұрын
which one did u try? i used places in Europe in this tutorial (Venice, Prague, Germany, Switzerland) so its possible outside of US too. But its possible that the data is not going to be available everywhere. But i can’t imagine that it doesnt work for Netherlands.
@DJJuxtapose
Ай бұрын
Same here from Australia. Google Maps isn't able to load.
@heitooooor
Ай бұрын
You have to select another Elevation Data Source (the second one should have the entire world), and navigate manually through the map with your cursor to get where you want.
@raphaelambrosiuscosteau965
Ай бұрын
cool~!!!!
@Al3eRtO10
Ай бұрын
Nice vid! If i want put led?with fusion how could I empty the mountain in the first example?
@IMChrisThom
Ай бұрын
I just tried TouchTerrain and it told me "This page can't load Google Maps correctly." Then I tried to search for my town and it says "No results for Orlando Florida, please try a different search (be more specific?)"
@Lukis3D
Ай бұрын
alot of people report that same problem too, i assume that the websites receive too many traffics currently. Try at a later time and see if that works. For towns, i wouldnt use TouchTerrain though, you wanna visit Touchmapper for that.
@heitooooor
Ай бұрын
You have to navigate manually through the map with your cursor to get where you want.
@holdupmaster
6 күн бұрын
is there coverage for other parts of the world? only seems to support USA?
@danh6720
Ай бұрын
Using that touch terrain, do you know of a way to add overlays? Specifically I'd love to add ski trails that are present in google maps.
@michaelhofler3518
8 күн бұрын
Hi, I tried to open touch terrain, after clicking on the home screen, the message was shown "Google Maps cannot be loaded correctly on this page." Does anyone have any idea how I should deal with this?
@gunracksonline
Ай бұрын
Thanks or the video . Using touch mapper. I get a cone that shows the location i searched for. Is there anyway to delete it before printing map?
@Lukis3D
Ай бұрын
yeah unfortunately it genereates that cone automatically. you can cut off the top part of that cone by right clicking the model, then select add negative part > cube. Resize and position the cube on top of that cone.
@gunracksonline
Ай бұрын
@@Lukis3D Thanks for the reply, That is what I did. I was hoping that i was overlooking someway to delete it.
@heitooooor
Ай бұрын
@@gunracksonline, in "Show advanced options" you can edit the coordinates (which I think sets the cone location) and then recenter the map using "X offset" and "Y offset" to your liking. I haven't tried it, but it should work.
@thekiwo_60
10 күн бұрын
There is an easy fix in PrusaSlicer: You can click the stl file in the slicer, then go to "Split to objects" in the upper toolbar, click on the cone, remove it. Then select all of the splitted parts and rightclick --> "merge".
@phgi3593
Ай бұрын
so.detail
@panjiputradwiaryaarianto1463
7 күн бұрын
how about the file from drone mapping, can be print like this to? i want print like this but from my drone mapping rendering from agisoft, ihope u will give us tutorial, ty
@TreeLuvBurdpu
17 күн бұрын
KZitem app won't let me like this :-(
@Lukis3D
17 күн бұрын
well im still glad u enjoyed my video! 😊
@matthewthompson7012
26 күн бұрын
Unfortunately Google doesn't support 3D buildings in my area. 😢
@yowaldo5212
Ай бұрын
I'd love to know if anyone has a good way to utilize this to make a DND map. Like a 3d map of Faerun would be so cool to make and my players would go nuts for it!
@ForestRangerFletcher
27 күн бұрын
What kind of extrude are you doing for the roads? When I do it it just allows me to drag the road layers around or up along the Z axis but I don't see any extrusion appearing underneath.
@ForestRangerFletcher
27 күн бұрын
nvm, I had the selection on faces by mistake
@renx99
Ай бұрын
This is very cool but I'm not sure what I would use these for. Suggestions?
@inkman2k2
22 күн бұрын
error loading MAP getting a message from Google indicating This page can't load Google Maps correctly. Do you own this website? how do you fix this issue
@Lukis3D
22 күн бұрын
no i dont own these websites, but my best guess is that they’re having problems since alot of people visit them at the same time. There’s a tip from another user that you could just paste in the coordinate or browse the map manually.
@IchMagNutellaSehr
14 күн бұрын
I have an error on the touch-mapper "search failed: OVER_QUERY_LIMIT"
@abruschini
14 күн бұрын
Same here.
@philcarpenter
14 күн бұрын
Same here, looks like it's broken...
@ForestRangerFletcher
26 күн бұрын
My STL does not appear in Fusion and appears as an elongated grey rectangle in Cura. It loads, appears as a listed object but nothing to show on the work surface. Has anyone else got stuck on this?
@ForestRangerFletcher
26 күн бұрын
Ok, I figured out it's better to export from Blender as an object file to open it in Fusion 360 then export in fusion as an STl file, now my roads don't appear in CURA though for some reason and the contours seem excessive.
@ForestRangerFletcher
26 күн бұрын
I've figures that out too, need to enable 'thin walls' in CURA settings otherwise they are lost due to downscaling
@Lukis3D
26 күн бұрын
Im glad that you figured it out!
@enrikouji87
Ай бұрын
what is the paid method? just curious.
@Lukis3D
Ай бұрын
Cadmapper + Sketchup, both are good tools to create cityscapes👍🏼
@dosdont
Ай бұрын
Maybe a video of how you clean and lube your z lead screw next? Everyone shows how to lube the xyz rails but nobody shows the lead screw.
@Lukis3D
Ай бұрын
hi there, i showed how i lube the lead screw briefly in my other video (MUST-HAVE 3D printing tools, at 03:30). I hope that helps!
@danielbeaumont3744
Ай бұрын
i think this video broke their site 😅 just get an error it can't load google maps now
@Lukis3D
Ай бұрын
yeah, it didnt expect that too.. but maybe try at a later time👍🏼
@brandondownhour9569
Ай бұрын
I think you broke the site lol
@Lukis3D
Ай бұрын
oh my..do they suddenly receive a lot of traffic 😅
@lamb212
Ай бұрын
@@Lukis3D I keep getting the "this page can't load google maps correctly" :(
@markusmatrekus1469
Ай бұрын
It doesn’t work anymore. Google maps error as well here.
@TiagoPerdigao
Ай бұрын
Does not work "This page can't load Google Maps correctly" Any solution please? Thanks
@Lukis3D
Ай бұрын
try at a later time. Im guessing that a lot of people are visiting these websites at the moment, i didn’t expect that it would crash them😅
@TiagoPerdigao
Ай бұрын
@@Lukis3D Appreciated ;D
@SueMyChin
Ай бұрын
@@TiagoPerdigao try terrain2stl instead while other site is down
@heitooooor
Ай бұрын
You can navigate manually through the map with your cursor to get where you want.
@tuskegee87
Ай бұрын
For Mac users, don't use a Mac 😂
@Lukis3D
Ай бұрын
ouch😅
@tuskegee87
Ай бұрын
@@Lukis3D 🤣🤣 that's what it sounded like to me! Awesome video though
Пікірлер: 174