Amazon Tool Recommendations: amzn.to/3QrjM8c Current retailers partnered with me & coupon codes: eManualOnline website: shrsl.com/3vcz4 Coupon Code: 4DIYERS20 (20% off any order) ECS Tuning Website: bit.ly/46tMpXP Auxbeam website: auxbeam.com/?ref=4DIYERS Coupon code: 4DIYERMR10 (10% off any order) Teslong website: teslong.com Coupon code: 4DIYERS (10% off any order) Lanmodo website: shrsl.com/3vczf Coupon code: LMD4DIYERS (Save $50 off order) Auxito website: www.auxito.com/?ref=xR3VZnDW Coupon code: 4DIYERS (15% off any order) Headlight Revolution website: www.headlightrevolution.com Coupon code: 4DIYERS (Free shipping on all US orders)
@tommywallbanger
Жыл бұрын
I'm needing brakes on my 2003 Tacoma. You're video was the best one I've seen on doing them. I think I've seen some of your other videos as I recognize your voice.
@icurt06
5 жыл бұрын
Excellent tutorial. I used to do it the hard way until I watched your video : ) Never thought about taking the brake shoes off and putting them on as an assembly. Way easier to do it how you explained!
@4DIYers
5 жыл бұрын
Thank you and happy to help :)
@TheReapersSon
2 ай бұрын
That was really nice of Bosch to provide the parts. Great video. I might attempt to do this. I'm somewhat mechanically inclined but messing with my brakes always made me nervous. You don't want to take any chances on your brakes. It can literally kill you if you do something wrong. Your video made it less daunting to think about doing. Thanks again!
@sndmnsix
7 ай бұрын
Well illustrated...thanks for the education on this! The only issues I really dealt with are those bottom springs; they can be such a pain!
@4DIYers
7 ай бұрын
You're very welcome! Yeah those springs are not fun.
@donemmanuel4226
3 жыл бұрын
Much thanks. This video really helped me. Change my brakes for the first time. You are an excellent teacher. 👍
@4DIYers
3 жыл бұрын
Awesome to hear and thank you for the feedback!
@jasonvincent4032
4 жыл бұрын
Great job- this helped a LOT putting my rear brakes back together. And thanks for showing both sides, too.
@4DIYers
4 жыл бұрын
No problem, happy I could help :)
@markdjohnson85
3 жыл бұрын
Thank you for this tutorial. The explanation was great and clearly done. I was reluctant to do this at first, but now, not so much.
@antonioramirez1990
Жыл бұрын
This video helped me a lot, thanks 🙏🏼
@4DIYers
Жыл бұрын
Glad to hear it!
@kcmurphy7367
2 жыл бұрын
This is a great video. Thank you so much for putting it out there. One bit of info I was looking for but you didn't mention was lubrication points - I was told not to use my parking brake until the pivot points were greased, but I'm a little wary of slapping grease randomly inside a brake assembly...
@elultimo102
2 жыл бұрын
I worked on my old VWs and used red hi-temp wheel bearing grease---just a touch on the pivot points when assembling. (I used hi-temp, bc I was afraid of it melting when the brakes heat up---my new container says 500F). I need to do my Tacoma brakes. They don't look too different, but I don't want to make a mistake, plus it's been 25 years since I did brakes.
@GioGuitarDude
4 жыл бұрын
Goodness thank you! I would have taken another couple hours to do this if not for this video!
@4DIYers
4 жыл бұрын
Happy I could help :) I have plenty more Tacoma videos too if you're seeking more info.
@stevejackson7899
Жыл бұрын
Yes it was very helpful. Thank you for your video content.
@Jeremy-kq5bs
2 жыл бұрын
I love how you just pop that last spring on with pliers. Seriously, how did you get it to stretch that easily??? I cannot get mine stretched enough, with a pry bar.
@hauikanamu9641
4 ай бұрын
Very informative thank you.
@pedrobatista8980
3 жыл бұрын
Excellen tutorial . thanks so much !!
@4DIYers
3 жыл бұрын
Glad it was helpful and thank you!
@kauaixtremeshorefishing1021
3 жыл бұрын
Awesome share braddhah Mahalo from Hawaii
@4DIYers
3 жыл бұрын
No problem and thank you for the kind words!
@abdalqadr1
4 жыл бұрын
Greetings for you from Iraq
@frankybobo7763
3 жыл бұрын
thank you brother!!!
@4DIYers
2 жыл бұрын
You're welcome!
@chrisniner8772
11 ай бұрын
After 267000 miles my rotors have a lip formed on the outer edge and grooves in the rotors. I bought the truck new in 2001. I guess I had to finally replace something!
@Woody_Florida
Жыл бұрын
Thank you. I appreciate the help
@4DIYers
Жыл бұрын
You're welcome!
@GoreTorn16
7 ай бұрын
I just need to replace the drums on mine. Do they need to be adjusted or lathed?
@4DIYers
7 ай бұрын
New drums do need to be cleaned with brake cleaner before installing. You'll also need to install new shoes, potentially a spring kit and then it needs to be adjusted.
@GoreTorn16
7 ай бұрын
I just had new shoes, and springs installed. @@4DIYers
@DylanCyr
3 жыл бұрын
Super clear and helpful tutorial. Are the drum brakes for the 2WD version much different?
@4DIYers
3 жыл бұрын
Thank you! If I remember correctly, they maybe a smaller diameter and will be a 5 lug instead of 6, but other than that it should be the same.
@chitoflores4799
3 жыл бұрын
My truck is 2wd, but it's the same as these. My 2wd is a TRD prerunner . So the parts are just 11 in .. the first time they gave me 10 in ones, those were small and Differnt.
@DylanCyr
3 жыл бұрын
Just a follow up on this, it's pretty much exactly the same, except some of the mounts for the springs are reversed back to front
@coppertopv365
2 жыл бұрын
4 min I am thinking.. HOLY CRAP!!! I can do the front brakes. . . I may just take this off to get rear brakes done.
@4DIYers
2 жыл бұрын
Just make sure you take photos for a reference if it's your first time. Otherwise it's a huge money saver.
@coppertopv365
2 жыл бұрын
@@4DIYers I did front brakes, Rotors, Calipers, and the passenger side CV Axle.. Then .. 🤬 I tried to bleed the brakes with the wifes help, pedal is going down almost to the floor. I think I still got air in lines, i tried 3×s .. so I called a vehicle doctor who will charge me $50 to rebleed them properly and evaluate tomorrow.. 🤞🏻 I hope to get it back right. So.. no I didnt wanna try rear brakes. I may later on or let someone help ..
@4DIYers
2 жыл бұрын
@@coppertopv365 Use a vacuum pump instead, I have a video and it makes bleeding brakes so much easier.
@hollieclark8814
3 ай бұрын
When you’re done you say you have to adjust and keep adjusting but to what exactly?
@atomicorang
4 жыл бұрын
i smashed the like button.
@4DIYers
4 жыл бұрын
Thank you so much!
@CP-ok1gv
Жыл бұрын
Was just about to do mine but my jack doesn’t raise it far enough to take the wheels off
@abdalqadr1
4 жыл бұрын
Smart man
@4DIYers
4 жыл бұрын
Thank you!
@crazyskull88
6 ай бұрын
HI Thanks for great content but I do have a question Hi does anyone knows which size is the correct one for 99 Tacoma pre Runner SRS 5 - 4 : 10" x 1.99" brakes or 11.61" x 2" brakes. when I try to but online it shows both fit but that cant be right. Please help
@4DIYers
5 ай бұрын
Thank you for the feedback! As for your rotor size, the best option is removing your wheel and measuring them. The only other option is calling the dealer and supplying them with your VIN.
@Mosh156
5 жыл бұрын
Nicely done. Will use to help replace Tacoma brakes!
@4DIYers
5 жыл бұрын
Thank you! I have plenty more Tacoma videos too.
@thebosscannon1444
5 ай бұрын
So I only need to press the brake pedal? Or do I need to bleed them after installing?
@4DIYers
5 ай бұрын
No need for bleeding. Bleeding is only done if the fluid was excessively low(empty master cylinder), you replaced a component that directly uses brake fluid or you opened up a fitting or bleeder exposing brake fluid and potentially letting air into the system.
@averygoodman761
4 жыл бұрын
Done, but I get a lot of pedal travel before braking begins. Needs adjustment? And possibly bleeding?
@4DIYers
4 жыл бұрын
Yes it needs to be adjusted. Or drive the truck in reverse and keep applying the brakes, it should self adjust.
@averygoodman761
4 жыл бұрын
@@4DIYers Thanks, man!
@donutplanetstudio8866
5 жыл бұрын
AMAZING ONE🍻
@4DIYers
5 жыл бұрын
Thank you :)
@elevaterob
5 жыл бұрын
Anyone know the best way to make these last longer? Coating with something before install would be nice. Thanks for Video, very straight forward.
@thedetective8150
4 жыл бұрын
Buy high quality brake shoes. My buddy likes Bosch and I like Centric.
@Davidadventures
3 жыл бұрын
A link to your drum removal video would be very helpful.
@4DIYers
3 жыл бұрын
Here it is kzitem.info/news/bejne/xoxjrnihgJOFfoI
@NorCalWelder916
3 жыл бұрын
Do you know what size drum you used?
@GothCad
2 жыл бұрын
You forgot to grease the brake-shoe-edge lands on the freshly-cleaned backing plate before installing the new brake shoes.
@calebf71
4 жыл бұрын
I've tried stretching the top spring with pliers and it does not go, no way. I got a set of spring pliers but I think they don't work for this application. Any other tips for getting spring on? I tried getting spring on and putting both shoes over the hub together and ended up ripping the dust cover on the cylinder (turns out it was leaking inside the cover and needed replacing). I'm kind of at a loss on how to get the spring back on
@averygoodman761
4 жыл бұрын
I attached the spring before installing the assembly onto the wheel.
@Jeremy-kq5bs
2 жыл бұрын
No, you didn't. Not with both springs attached you didn't.
@coppertopv365
2 жыл бұрын
How often you gotta change these? Every time you change the front brakes, 3 months, 3,000 miles 🤷🏼♂️
@4DIYers
2 жыл бұрын
Depends on your driving style, but drums brakes should easily last 100,000 miles.
@2strokeadventures
5 жыл бұрын
Is this the same on a 95 4 runner?
@4DIYers
5 жыл бұрын
I believe so, I haven't worked on a 4Runner but I know the 3rd is very similar to the 1st gen Tacoma .
@sebastianbokis1665
4 жыл бұрын
You didn't torque to spec lol thanks man helped alot
Пікірлер: 73