This channel is the best thing ive ever found. Johnson Controls should be paying you to teach this.
@Systemcontroltech
3 жыл бұрын
I wish they would
@rootboy60
Жыл бұрын
As always very good info, your vids are excellent. God bless.
@Systemcontroltech
Жыл бұрын
Thanks
@aravinthaj1320
7 ай бұрын
Tq sir ur video very useful for me
@Systemcontroltech
7 ай бұрын
Thanks for watching
@nabeelmubashir
3 күн бұрын
Nice 💯
@user-uf4vg8io3h
3 ай бұрын
Mines not showing IP in source. Only shows time and length. Is this a setting issue? Thanks
@Systemcontroltech
3 ай бұрын
You should be able to discover the IP address using either Putty or Hyperterminal. Another way is to so a mac ID IP reservation if you have control of your network. You can assign the IP address by creating a rule on your router.
@MrJovan1974
4 жыл бұрын
Informative. Thank you.
@Systemcontroltech
4 жыл бұрын
Thanks for watching
@MrJovan1974
4 жыл бұрын
System Control Tech When you time, if you could explain the use of safeties relays and how it is wired to an AHU would be helpful. Thank you and appreciate your effort and time. Enjoy life as it is so beautiful!
@Systemcontroltech
4 жыл бұрын
I did a video on them a few years ago. Check out my channel to find it
@lifetechnologysystems3495
3 жыл бұрын
Hello, I have an issue about NCE controller, it doesn't communicate with Fx03 on FC bus, should I reset it because the cables are OK, if reset how.? Thank you
@Systemcontroltech
3 жыл бұрын
Cycle the power on the nce. If it is a new installation make sure it is the bacnet version. Not all nce will communicate bacnet. Some are made for n2
@lifetechnologysystems3495
3 жыл бұрын
@@SystemcontroltechIt is an old installation, the probel occured when the technician unplug the SA bus when the NCE is powered. I switch the NCE off and on but the communication doesn't work any more, I need then switch off all bus equipment and see what happens
@lifetechnologysystems3495
3 жыл бұрын
@@Systemcontroltech hello, a Johnson Controls partner told me that the NCE bus must be repaired, I think by software, please can you tell me how?
@griffintraining2517
3 жыл бұрын
When you finally do Launch what is that box that opens and says Metasys on it? When I try it my browser opens and it says incompatible browser.
@Systemcontroltech
3 жыл бұрын
That is the login screen for the device
@fredish78
2 жыл бұрын
where can i get the username and password for my launcher tool ?
@Systemcontroltech
2 жыл бұрын
Contact jci
@toddm3226
4 жыл бұрын
How are you handling HVAC pro with windows 10? Our I.T. Department has swapped out all of out computers with windows 10 models except 1 and its been removed from the domain. We have roughly 1/3 to 1/2 of our system is still n2 so we will be using pro for awhile. Have you had any exposure to the MUI system? We are doing a whole campus upgrade and it will take me awhile to get used to it. Not a big graphics guy. Thanks for the informative videos.
@Systemcontroltech
4 жыл бұрын
We have one laptop that is 32 bit that halfway runs it. We have began replacing older devices with newer generation as they fail.
@generalelectrictradingsarl1009
3 жыл бұрын
Hello, Metasys with this Error " Internal error - Unable to retrieve archive names" , please how to solve this issue
@Systemcontroltech
3 жыл бұрын
You have a corrupt file and will need to reinstall
@generalelectrictradingsarl1009
3 жыл бұрын
@@Systemcontroltech May i have installation modify or remove
@omarsalah8816
3 жыл бұрын
I have a project which includes Metasys FECs and NAE ... I have done all the FEC programming on CCT ... I have a problem with launching my NAE via the SMP ( Site Management Portal ) knowing that I do not have Johnson Control Server, neither ADS nor ADx ..... After doing all the steps through the lurcher .... THE SMP ( user name and password) appeared ... What should I do to log in ... knowing that .. this is an old project and these materials were supplied 7 years ago.,, Please advice
@Systemcontroltech
3 жыл бұрын
You should be able to log in unless you don't have the password. I have no idea what it could be set to in your device
@marcinbrzezinski731
Жыл бұрын
Hello. Do you know the default SCT 15 username and password?
@Systemcontroltech
Жыл бұрын
You will need to contact JCI
@Grendel1974
4 ай бұрын
How do I find the launcher utility?
@Systemcontroltech
4 ай бұрын
You can simply Google it.
@GtrMan863
3 жыл бұрын
I have a job with an NCE and for some reason the users passwords stopped working, I tried the factory installer password and that doesn't work, the NCE still has its program would you know what I can do to access and repair this problem?
@Systemcontroltech
3 жыл бұрын
If you have a backup of the program you might be better off reimaging it and make sure you enter the correct password. If they changed the original there's no way to know what that was
@RolfStorm
4 жыл бұрын
Thank you for this 👍😀
@Systemcontroltech
4 жыл бұрын
Thanks for watching
@jeremybowen5813
3 жыл бұрын
Can't you just attach it to the switch and just arp it after spanning tree runs? In that case there should only be two devices on the switch.
@Systemcontroltech
3 жыл бұрын
Today it's commonly done using Wireshark and even the newer SCT.
@juanpablorosas9422
4 жыл бұрын
Wht dont you use NIC? I think it d take the same time for NAE/NCE to show the IP or mac
@Systemcontroltech
4 жыл бұрын
I use it also but not everyone has it. I wanted to use something that is readily available for anyone to get.
@bzifrostyy631
4 жыл бұрын
is NIC a Johnson Software to access the controllers?
@gt4033133
3 жыл бұрын
Thanks
@Systemcontroltech
3 жыл бұрын
Thanks for watching
@-5015
3 жыл бұрын
Soft SCT dowloads?
@Systemcontroltech
2 жыл бұрын
What do you mean?
@deepraja
2 жыл бұрын
Great Job, Excellent Videos. How is it possible to connect with you via email for other questions if it is OK? Thanks
Пікірлер: 47