Great little jig, Tamara, er... Tammy, er.... Taymar, er.... TAMAR!
@3x3CustomTamar
5 жыл бұрын
Hahaha! I’m sure you can imagine what my Starbucks cups say... 😂😂
@modestmaking5314
5 жыл бұрын
@@3x3CustomTamar I like to mess with the Starbucks folks and give them a weird name and make it extra hard for them. I'll tell them my name is something like "Yannas but with an H" and won't tell them how to spell it. 2 can play the whole "name butchering" game!
@3x3CustomTamar
5 жыл бұрын
ModestMaking hahaha! That’s hysterical.
@heyimamaker
5 жыл бұрын
I ordered a coffee once for my friend Rick. They wrote Crick...
@3x3CustomTamar
5 жыл бұрын
Hey I'm a Maker so no ones safe I guess. Ha
@TheMikeNan
2 жыл бұрын
Oh my gosh! I was struggling on how to use dowels in angled joints. Your solution is PERFECT! Thanks for sharing.
@adriannatale2790
Жыл бұрын
I come back to your videos all the time. And this one is exactly the tip I needed for my current project. Thanks Tamar!
@ColoradoHiker
4 жыл бұрын
When using wood clamps on the drill press to hold things..... I found it helped a lot when i glued sand paper onto the wood clamps. Cuts way down on pieces slipping.
@gpdoyon
Жыл бұрын
Thank you very much for this video! I had just cut out all of my angled joints and thought that my dowelmax tool would work perfectly. Nope. Your simple jig saved me. I’d spent quit a bit of time trying to figure out the solution to this problem. You’re the best!
@barbarabrowne5956
Жыл бұрын
Totally agree!!!
@DIYMontreal
5 жыл бұрын
Great video Tamar! One of my 2019 "resolutions" is to incorporate angles and curves in my builds and this will definitely help with that!
@3x3CustomTamar
5 жыл бұрын
That’s a great resolution! Awesome!
@andrewlynch27
5 жыл бұрын
Tamar I admire how fearless you are. I must work on this for myself.
@3x3CustomTamar
5 жыл бұрын
Just go for it! I am scared of working in the cold though. I am not liking this.
@2006goducks
Жыл бұрын
Thank you! You’re a life saver. I’ve spent way too much time trying to figure this out myself and your solution is brilliantly simple.
@DianeM.Schneider
2 жыл бұрын
I have been beating my head against a wall trying to figure this out. You have saved me so much time. Thank you thank you!
@davidlanders2853
10 ай бұрын
Brilliant..........new to wood working, but wood workers truly astound me in their ability to innovate. Thank you
@Gantorin
4 жыл бұрын
I know this is an older video of yours, but I just found your channel, and have been clicking on any video that comes my that you have made. I love watching and doing wood working, and this just fills my head with tons of ideas and tips. So thank you!
@3x3CustomTamar
4 жыл бұрын
So awesome to hear! Thanks!
@guidocason4114
5 жыл бұрын
Among all the woodworkers in KZitem, you are my absolute fav. I really enjoy your videos. Greetings from Argentina! Keep up the excellent work
@3x3CustomTamar
5 жыл бұрын
Thanks so much for the kind words! That means a lot ☺️
@MicahFunk
Жыл бұрын
I like that you used creativity to come up with a tool to accomplish your specific needs. Nice job!
@DeanneMariaCreates
5 жыл бұрын
Hi Tamar, I love making jigs and I add copper tubing to my wooden dowel jigs to maximise their use. Love your channel; great tips.
@3x3CustomTamar
5 жыл бұрын
Thanks!
@grammadrm4974
4 жыл бұрын
You are my new woodworking idol. I love that you talk during vids.
@3x3CustomTamar
4 жыл бұрын
Happy to hear that! Thanks!
@grammadrm4974
4 жыл бұрын
@@3x3CustomTamar Have you done a vid on your little measuring scribe made of wood?
@tommccurnin524
2 жыл бұрын
I Didn't Even Want to Make This Jig, But Just Had to Watch. Good Job! I would not want to make the holes 90° like some have suggested, as the holes in the end grain would be cross grain, and bits would wander and the joint is not as strong as 100% face grain. That's why we were taught to make angled tenons when doing hand work. I don't know of an angled dowel jig, except for a 45° Dowel Max attachment, so this is a perfect one time jig. Good Job. I do do like seeing your mistakes, as we only learn from mistakes. Oh, and by the way to keep bits from wandering in end grain, follow up the awl hole with a small pilot hole, about a 16th, then you can even follow up with a slightly larger bit, like 1/4 to get you started, which is what I was taught by Paul Sellers in Waco, Texas many years ago.
@DCFusor
5 жыл бұрын
Nice! I'd add that these "tool making" techniques were/are also crucial for a pre-CNC machine shop. The techniques are pretty universal, and continue today - not everyone has a good enough CNC setup (or at all) to beat jigs in making a bunch of things exactly the same (without thought, errors can stack up in ways a good jig prevents). Ask any machinist about the respect the title of toolmaker gets...
@CB71SS
5 жыл бұрын
Have an outdoor rocking bench with a broken rocker. I need to put an angled dowel in it and have been trying to figure out how to do it and now I know. Thank you so much this has bugged me for a long time. Great videos.
@3x3CustomTamar
5 жыл бұрын
Awesome. So glad it was helpful
@v.d.2527
5 жыл бұрын
Well done! I was racking my brain on this kind of issue. What you did is smart, simple et efficient. It looks to be an easy trick to design, therefore it means it's a brilliant idea.
@3x3CustomTamar
5 жыл бұрын
Thanks! Yeah simple is best most of the time
@nosleepdelirium1214
3 жыл бұрын
Thank you! I just did my first angled stool using dowel joints and I just drew a line on the side of the wood as a guide while I drilled angled holes by eye haha it worked but obviously not very precisely. This is very helpful!!
@3x3CustomTamar
3 жыл бұрын
Glad it was helpful!
@woodman3416
3 жыл бұрын
I am impressed every time I view your videos. Keep up the great work.
@atlas227428
4 жыл бұрын
Great video again Tamar......i am currently making a floating shelf and wont be needing angles but was nice to watch how you figured things out......very smart !!
@3x3CustomTamar
4 жыл бұрын
Thanks! Glad you still liked it
@manoharsagunthalla9215
5 жыл бұрын
It’s wonderful! I have been asked even engineers but you have shown practically just simple demo to understand! Expecting more and more ideas from you mam
@3x3CustomTamar
5 жыл бұрын
Glad you found it helpful!
@blairdouglas1749
5 жыл бұрын
Great tip. Im glad to see it's not just my daughter that uses my work surfaces for drawing. 👍
@3x3CustomTamar
5 жыл бұрын
Ha! It’s how I keep them busy while I work.
@nomad4731
3 жыл бұрын
Ms Tamar, thx for sharing the video, it was short, sweet, and to the point, that is an idea that I'll put in practice.
@3x3CustomTamar
3 жыл бұрын
Glad you liked it. Thanks!
@freezepop6389
3 жыл бұрын
I've been trying to figure out how to do this for a few days now. I was starting to get nervous because my deadline is really close, I'm going to make this jig when I get home thank you so much.
@3x3CustomTamar
3 жыл бұрын
Awesome. Hope it works out for you
@peterlabat1527
4 жыл бұрын
Pure satisfaction looking at that joint coming together
@3x3CustomTamar
4 жыл бұрын
Agreed
@AB-nu5we
5 жыл бұрын
Saw your photo spread in family handyman Winter edition, you and April. New career addition, shop gear modeling...promising. Nice jig idea
@johngratton467
4 жыл бұрын
Beautifully simple, exactly what I was looking for to build some simple machine stands
@3x3CustomTamar
4 жыл бұрын
Awesome. Glad it was helpful
@davidbarton215
2 жыл бұрын
you've solved my little issue with an angle drill 👍👍👍👍look forward to the adjustable version.
@chrisbarbot9551
5 жыл бұрын
I can't even get a straight dowel joint right and you did an angle one so perfect. You something else great job
@3x3CustomTamar
5 жыл бұрын
Ha! Thanks!
@spicy6892
3 жыл бұрын
This is so fucking 5head, watched many videos, bought a dowel jig, but nothing compares to this, god bless you! 🙌
@3x3CustomTamar
3 жыл бұрын
Awesome
@PrinceWesterburg
4 жыл бұрын
Oooooh! The small block at the start: Get a 'centre punch' which is much better than a stole (awl) for marking then get an 'Engineer's Vice' for the vertical drill (drill press stateside). Stoles are pretty hard on your hands and joints and the vice will save you time too.
@Yusufmasron
5 жыл бұрын
I wish i saw this video before yesterday. I messed up my work trying to drill holes on a chamfer. thanks for the video. look forward to the adjustable version.
@3x3CustomTamar
5 жыл бұрын
Ha! Sorry! One day too late!
@bking0220
5 жыл бұрын
Nice job Tamar! Your projects are always a joy to watch.
@3x3CustomTamar
5 жыл бұрын
Thanks so much! I really appreciate that!
@uncledope77
5 жыл бұрын
I totally agree!
@LiloUkulele
3 жыл бұрын
Another great video!!!! Yes, it’s a one time jig...the bit bores out and enlarges the hole in the jig with repeated uses. If it’s a permanent jig I will install drill guide bushings. Thank you!
@3x3CustomTamar
3 жыл бұрын
Thanks!
@robsandstrom9854
5 жыл бұрын
Nice jig Tamara, Actually, very timely for me. I was just searching for methods to insert angled dowels two days ago. This would have helped me then, but i like your solution better than the one I found and will put it to use in the future. Thank you for the clear visual presentation and the straight-forward-easy-to-follow information.
@3x3CustomTamar
5 жыл бұрын
Oh man wish I posted it sooner then!
@ramonbannister9498
3 жыл бұрын
Nice. Gave me an idea to make straight, 90 degree dowel jigs quickly and cheaply.
@3x3CustomTamar
3 жыл бұрын
Awesome
@Farroutman1
3 жыл бұрын
The first video I watched on this subject at it was great. When I have more time and my shop setup properly I'll be doing these kinds of jigs. For now I think I'm going to mortis and tenon my current project because it will be easier for me. Thank you for the amazing and straight to the point video!
@3x3CustomTamar
3 жыл бұрын
Glad you found it helpful!
@jerryhuber3653
11 ай бұрын
To make the reusable, you could drill the holes larger, and insert a metal tube with the inner diameter you want your dowels to be. As for being adjustable, attach rods to the outer guides that can slide through the jig for width changes, and run some bolts through that hit the side of the jig to stop the sides from sliding back in. If you want the angle to be adjustable, I’m unfortunately at a loss for that at the moment.
@terrywagner468
4 жыл бұрын
love your simplicity Tamar.
@3x3CustomTamar
4 жыл бұрын
Glad to hear 😊
@TheEveryMaker
5 жыл бұрын
Drilling into endgrain always caused my bit to drift. If I'm doing a lot of work with the same jig, I will typically drill an oversized hole, then add in a brass sleeve to make sure I don't drill out the holes in my jig. Great jig, I love how easy it was!
@3x3CustomTamar
5 жыл бұрын
That would have helped a bit here.
@jadae001
5 жыл бұрын
I liked your project, you are always helping with new projects for the workshop. Thank you
@3x3CustomTamar
5 жыл бұрын
Glad you liked it!
@robertpelland5649
3 жыл бұрын
I could use a verity of words to describe this process, however I believe that brilliant, is more appropriate then any other choice of words. Kudo's Tamar
@3x3CustomTamar
3 жыл бұрын
👍👍
@MikeTheMaker1
5 жыл бұрын
That is hands down the most useful tip I have ever seen!
@3x3CustomTamar
5 жыл бұрын
Awesome! Glad you like it!
@dmaclel487
2 жыл бұрын
Nice jig and I will definitely add it tool my “collection”. I have drilled the holes prior to cutting the angles before but you will have to be careful to get the depth
@markhunt6177
4 жыл бұрын
You're pretty smart. I doubt I could have come up with that solution. I feel like I've learned a couple of things today, thanks.
@3x3CustomTamar
4 жыл бұрын
Awesome
@VansWorld
5 жыл бұрын
Great video. Thanks for sharing
@3x3CustomTamar
5 жыл бұрын
Thanks!
@nickgoogle4525
4 жыл бұрын
See "Joint Genie" (UK based company) -- which is basically the same idea, but adjustable. Also cool that you can screw it to a wood instead of clamping. That can be a plus in some situations.
@j10001
3 жыл бұрын
You’re really talented at creating jigs for every need that pops up. Thank you for sharing!
@3x3CustomTamar
3 жыл бұрын
It’s always fun for me to figure out
@adammontgomery7980
6 ай бұрын
When drilling into a slanted surface, I've used a forstner bit to make a flat spot and follow up with a regular drill bit.
@poultonprojects
5 жыл бұрын
I sure do enjoy your videos i love how you show the process of things not working out but then you finding a solution!
@3x3CustomTamar
5 жыл бұрын
Thanks so much! It’s all a learning process for me. So hope others can learn along with me!
@DIYHGP
5 жыл бұрын
Tamar, I had the same angled issue with trying to do joinery. A much easier solution which could work for your project is to drill the Dowel holes the same 90° to the surface. because your piece is big enough as long as the Dowel doesn’t extend through the other side of the wood or leg. I used the Dowel wizard it’s my jig for all dowels.
@3x3CustomTamar
5 жыл бұрын
I was trying to find a solution that wouldn’t require someone buying a tool. I have some center finding dowel jigs and I actually prefer to make templates when I do dowel joinery. I have to mark and measure less often.
@alext9067
5 жыл бұрын
@@3x3CustomTamar I agree. I saw the dowel wizard. Meh. $80 bucks? Pfff
@a9ball1
Жыл бұрын
That's one of those stupid easy jigs that works so well. I say you are brilliant.
@leivasrodriguesdecampos5808
5 жыл бұрын
GOOD NIGHT YOU ARE VERY INTELLIGENT AND CREATIVE PARABENS ADMIRED YOUR WORK
@3x3CustomTamar
5 жыл бұрын
Thanks! ☺️
@zaqmko0
Жыл бұрын
Very nice. I'm just about to start a project that needs a 15 degree dowelled joint similar the one for your desk project. This jig looks a lot easier than the over-engineered one I thought I was going to need. The only "clever" thing I'll add is to use the miter saw, which was already set up to cut the pieces to be joined, to cut the block for the jig. That way it's already the exact same angle as the project parts, even if it was initially set up a degree or two off one way or the other. On a side note... This is from 2019??? How have I not seen this for all this time? 😀
@BookofIsaiah
5 жыл бұрын
Hi Tamar, you alway impress me with your ingenuity!! I've learned SO much from watching your videos!! Thank you for sharing all your ideas and information! Have a greta day!!
@3x3CustomTamar
5 жыл бұрын
That’s so awesome to hear. Thanks! Have a great weekend!
@BookofIsaiah
5 жыл бұрын
Thank you, Tamar!!! You and your family also!! @@3x3CustomTamar
@markbryan9989
5 жыл бұрын
You learn, we learn! Thanks Tamar.
@3x3CustomTamar
5 жыл бұрын
I hope so! Thanks!
@daver7013
2 жыл бұрын
Once again your problem-solving is incredible. Thank you for sharing that.
@ModernRemade
4 жыл бұрын
Wow this was an absolute mystery to me but you explained it wonderfully. Thanks for the knowledge!
@3x3CustomTamar
4 жыл бұрын
So awesome to hear
@rainerhasler135
3 жыл бұрын
Intelligent solution! Inspiring! Thank you!
@3x3CustomTamar
3 жыл бұрын
Glad it was helpful!
@ImGonnaMake
5 жыл бұрын
Wish I was half as smart as you when it comes to figuring out stuff like this.
@3x3CustomTamar
5 жыл бұрын
Ha! There are always fails before I figure something out
@zwgrafakhsandrianos7784
Жыл бұрын
Awsome video once again!!! Thank you for making our lives easier!!!
@natazer
4 жыл бұрын
Just started wood working. Awesome video! Thanks!
@3x3CustomTamar
4 жыл бұрын
Thanks! Glad you liked it
@robertevans6481
5 жыл бұрын
You knock this one out of the park,now for a shop heater....👍
@3x3CustomTamar
5 жыл бұрын
Ha! I would need insulation first.
@jarodsown2596
5 жыл бұрын
you know, i was just on KZitem this morning thinking "it seems like it's been a little while since Tamar has posted a video", then what do you know, the next time I get on Facebook, Angled Dowel Joinery! :)
@3x3CustomTamar
5 жыл бұрын
Hahaha! Yeah! Took a break with the family over the holidays!
@jarodsown2596
5 жыл бұрын
@@3x3CustomTamar Very nice! Much deserved and much more important. But happy to have you back! :)
@hajiothman4050
2 жыл бұрын
Creative idea. Well done. Thank you.
@3x3CustomTamar
2 жыл бұрын
Glad you like it
@weston0614
5 жыл бұрын
Loving your videos! I’ve watched you from the beginning and you Mrs. Lady have been kicking some serious butt! As a fellow lady woodworker, I am so proud of you. Keep them coming momma!! P.S. Get a heater for your shop woman! ❤️
@3x3CustomTamar
5 жыл бұрын
Ha! I’m hoping to redo my whole shop/garage one day! Thanks! We need more of us lady woodworkers!
@weston0614
5 жыл бұрын
3x3Custom - Tamar . Yes Queen! We need more lady woodworkers. I’m teaching both my girls. One is taking to it more than the other but that’s ok. They don’t have to be woodworkers when they grow up but if they can save some money fixing up their own homes, it’s all worth it. Keep doing your thing Tamar!
@3x3CustomTamar
5 жыл бұрын
Ladywood2 totally agree! It’s all about confidence in teaching them to do it themselves.
@ZeWriter1
3 жыл бұрын
Like all your projects, such an easy DIY jig to get professional result!
@3x3CustomTamar
3 жыл бұрын
👍👍
@ianpearse4480
2 жыл бұрын
Thank you Tamar. Now back to rebuilding my Christmas tree stand.
@3x3CustomTamar
2 жыл бұрын
Ha have fun!
@franklettering
4 жыл бұрын
Thoroughly enjoyable as per. ....succinctly explained.
@3x3CustomTamar
4 жыл бұрын
Thanks!
@CranialExtractor
Жыл бұрын
This is really helping me finish a project. Thank you :)
@3x3CustomTamar
Жыл бұрын
Glad I could help!
@velwheel3135
5 жыл бұрын
Good logic that we seem to not think of in the midst of a project.
@3x3CustomTamar
5 жыл бұрын
Glad you like it! I figure this all out as the project moves along. Ha
@barryroberts6470
5 жыл бұрын
Nice one Tamar, i love how you think of a jig for everything that you do, Amazing. Now go inside and warm yourself up. Barry (ENG)
@3x3CustomTamar
5 жыл бұрын
Ha! Thanks Barry! It’s going to get colder!
@peterkos1034
4 жыл бұрын
Your quite the inspiration doing this. Your pretty good. Keep it up. You have re inspired some old ideas I've had put on the back burner for quite some time. Will get stuck into them when I get back to work next week . Plenty of scrap and offcuts at work I can use. Cheers !!
@3x3CustomTamar
4 жыл бұрын
So awesome to hear!
@MultiTom1956
5 жыл бұрын
That's a brilliant jig Tamar😊 since don't have a table saw the 10°angle cut can be done on a mitre saw ( possibly a stupid question)😄. Thank you so much
@3x3CustomTamar
5 жыл бұрын
Thanks! That’s how I initially cut the pieces I was using to join together. To if you take a small cut off from there you can make the jig.
@vincentrodak9734
5 жыл бұрын
This is really clever. I learned a lot. Thanks!
@3x3CustomTamar
5 жыл бұрын
So happy you learned something! Awesome.
@kevinnobody3052
5 жыл бұрын
I love your channel because you are jig crazy, and so am I !!!!!!
@3x3CustomTamar
5 жыл бұрын
Hahahaha! Funny thing is when I first started woodworking I came across a crosscut sled video and thought. Wow. I’m never going to make anything like that. Ha!
@animationcreations42
5 жыл бұрын
What a simple idea! I think it would be quite difficult to make an adjustable jig accurate enough using just wood, in particular getting the angle right. I suppose it would be easy enough to make a set of jigs with different spacing for the dowels but getting it centre on the end of the stock is going to be the difficult part, as with anything that's adjustable, getting the tolerances small enough for it to be repeatable is where the difficulty is. But if anyone can come up with a simple jig, I'm sure it'll be you!
@3x3CustomTamar
5 жыл бұрын
Thanks! I def would have to use other materials other than wood. Especially since drilling into the wooden holes expands them over time. I’ll think about it!
@prakashgudimetlagudimetlap2533
5 жыл бұрын
Happy your video thanks for the next video no late coming fast
@3x3CustomTamar
5 жыл бұрын
Thanks!
@tovshop
5 жыл бұрын
Always great to learn new things 😁 Thanks Tamar!
@3x3CustomTamar
5 жыл бұрын
So glad you learned something!
@davidlevally4141
2 жыл бұрын
You are a smart cookie.
@wm005
5 жыл бұрын
Great idea. Enjoy watching you figure it all out...
@3x3CustomTamar
5 жыл бұрын
Thanks! It’s fun to figure this stuff out
@durrwooddude
5 жыл бұрын
Nice! I’ll use this idea for the MCM dining room table on my To Do List!
@3x3CustomTamar
5 жыл бұрын
Awesome
@chipheadnet
5 жыл бұрын
i love that you show what didn't work!💖👍😁
@3x3CustomTamar
5 жыл бұрын
Just showing the process!
@jasonb2340
2 жыл бұрын
This was super helpful. I will use it this weekend. Thank you!
@3x3CustomTamar
2 жыл бұрын
Awesome
@mariomuranaka9751
4 жыл бұрын
Very good idea,congratulations !
@3x3CustomTamar
4 жыл бұрын
Thanks so much!
@paulacklin9933
5 жыл бұрын
This was very informative, especially using the angle piece to glue. Thanks
@3x3CustomTamar
5 жыл бұрын
Glad it was informative!
@jeffhatt7613
4 жыл бұрын
I love all your Jigs, you're very clever!
@3x3CustomTamar
4 жыл бұрын
Thanks!
@WolfRidgeWoodworking
5 жыл бұрын
That’s a great idea for the jig and a tight joint!
@3x3CustomTamar
5 жыл бұрын
Thanks! It really made the glue up go smoothly
@mesterim
5 жыл бұрын
Love this video. I knew this technique but never tried it. But now I'm confident in doing it. Thank you.
@3x3CustomTamar
5 жыл бұрын
Awesome. Glad you liked it!
@tamerabdelaziz.
4 жыл бұрын
Very good job tamar Thanks and keep going 👍
@3x3CustomTamar
4 жыл бұрын
Thanks so much!
@jasonkingshott2971
4 жыл бұрын
Really interesting, thanks Tamara.
@3x3CustomTamar
4 жыл бұрын
Glad you enjoyed it!
@johnalbrecht3831
5 жыл бұрын
Perfect engineering ! Great problem solving mind !
@3x3CustomTamar
5 жыл бұрын
Thanks! ☺️☺️
@smc4lcc
5 жыл бұрын
Great tutorial, this would be great to make some midcentury stuff, such as a plant stand. Thanks for sharing!
@3x3CustomTamar
5 жыл бұрын
Glad you like it! The desk I’m making is sort of a MCM design
@ekhles104
3 жыл бұрын
Very very very excellent
@3x3CustomTamar
3 жыл бұрын
Thanks!
@Aprendiz-de-Marceneiro
5 жыл бұрын
Nice job Tamar! 👍👍👍
@3x3CustomTamar
5 жыл бұрын
Thanks!
@SouthernStyleDIY
5 жыл бұрын
Love it! Absolutely genius!! You have a knack for really useful tips and tricks for how to up your making game.
@3x3CustomTamar
5 жыл бұрын
Thanks! I’m just sharing what I learn along the way!
@athmostafa2462
5 жыл бұрын
Tamar , you splendid wood worker .🔨👍 p.s , more videos pls .
@3x3CustomTamar
5 жыл бұрын
I’ll get to work! Thanks!!
@BearCreekWoodworking
5 жыл бұрын
Great Jig Tamar! I like how you solve these problems! Great Job!
Пікірлер: 685