Thank you dude you are awesome! Is yours a 2018 model?? Mine is a 2014 hybrid S. But a clock replacement.
@regularmechanic4196
9 ай бұрын
It’s a 2011
@mmkimc
10 ай бұрын
Can I just connect three strands? Please tell me what color to connect
@arionb2536
11 ай бұрын
Hey does the clock light up at night ?
@Wantobe123
2 ай бұрын
Hello Does the clock run while the key is out? Or does it do a full reset when turning on the car?
@regularmechanic4196
2 ай бұрын
@@Wantobe123 the clock turns off when the cars off, both hands go to the 12 position, when you turn the car on all the hands do about 2 full rotations.
@Wantobe123
2 ай бұрын
@@regularmechanic4196 thanks. Just like factory installed.
@RebsteinLaurent
Жыл бұрын
Many thanks for this great video 👍 Was it a new or used chrono? I’ve tried to do thé same installation on my 958, but the chrono isn’t awake… no menu on my PCM & cluster… What should I do 🤔
@regularmechanic4196
Жыл бұрын
Double check the integrity of the connections on the wiring
@geekytechie6540
Жыл бұрын
Hi! Would you know which wire would be 12 Volts Ignition/Accessory in the door panel of the cayenne 958? Been installing ambient lights and I can’t find a ignition on wire?
@regularmechanic4196
2 ай бұрын
@@geekytechie6540 the 958 should have blank plugs on the door harness already for ambient lights. If not just use a multimeter set on DC bolts and connect it to positive and ground with ign on and see, I’d assume the window power is switched ignition and the speaker
@rodneymorland4586
5 ай бұрын
Hi I have a 2019 Macan and was hoping to do the same thing, was your fitted for a clock? the dealership tell me mine doesnt have the loom required so they cant fit it, was this the same for yours?
@regularmechanic4196
5 ай бұрын
I had to add my own loom into the radio harness it was not originally fitted for a clock
@rodneymorland4586
5 ай бұрын
@@regularmechanic4196 did you get that from a dealer
@rodneymorland4586
5 ай бұрын
@@regularmechanic4196 could you give me a run down how you did it
@regularmechanic4196
5 ай бұрын
@@rodneymorland4586 i did mine in a cayenne, I have a 2015 macan it came with the clock, if I’m not mistaken the macan and cayenne have the same radio so it should be similar to how I did it in the video. I honestly can’t 100% be certain though
@ashleykiara3168
2 жыл бұрын
It looks so much better now
@manflaco
Жыл бұрын
Where did you source the clock from?
@regularmechanic4196
Жыл бұрын
Bought it used off eBay
@ilonamatyska2328
10 ай бұрын
hi, evrything is working, but is low light, Can we more the brightness
@agerasickin
9 ай бұрын
Did you manage how to make brighter?
@johnlin4132
2 жыл бұрын
Where could I get the cable harness from? Thanks
@regularmechanic4196
2 жыл бұрын
You can find it at sun coast Porsche or your local dealer can order it Part number is : 981.612.692.00
@johnlin4132
2 жыл бұрын
Where did you get this cable hardness from? Thanks
@kurtauzins4098
Жыл бұрын
Your DIY video is very informative and appears to be a nice upgrade for vehicles without this option. While soldering appears to be a viable solution, in a typical vehicle environment the heat/cold and vibration often leads to clacks and failure. I'm not an automotive connector expert by any means, but I believe there are some important concepts to a good solder joint. It's best to have a mechanical (ie twisted wire) connection before soldering. There are a ton of videos on this subject like this one: kzitem.info/news/bejne/l3ufr3iEfptzkoo
@regularmechanic4196
9 ай бұрын
I agree, soldering inside the cabin of the vehicle is usually safe, soldering in the engine bay is a no go
Пікірлер: 28