Finally a search of "How to wire an outdoor light to an existing outlet" finds this video of EXACTLY what I am looking for! And my eyes grew wide when you pulled out that switch outlet! Perfect!
@handydadtv
6 ай бұрын
Glad it was helpful 👍🏻
@crystalfagan2904
Жыл бұрын
What I love about the videos, it is not long and you information is plain enough for anyone to understand.
@handydadtv
Жыл бұрын
Thanks so much 😊
@mansari4794
Жыл бұрын
The best demonstration benefits everyone for a minor project. Thanks to Handy Man.👍👍👍👍👍👍👍👍👍👍
@handydadtv
Жыл бұрын
Thanks so much 😊
@Stophocles
10 ай бұрын
Perfect. I knew most of this, but it was still great to watch before doing the job and the outlet with the switch is just what I need to replace the outlet in the ceiling of my garage that I'll wire the light to.
@handydadtv
10 ай бұрын
Glad it was helpful 👍🏻
@gaztorzambroni3831
9 ай бұрын
Excellent work. Because of your videos now I can change the outlet like you teaching us how to do it.Thanks.
@handydadtv
9 ай бұрын
Glad it was helpful 👍🏻
@michaelcervantes5244
Жыл бұрын
Short and simple, love these videos
@handydadtv
Жыл бұрын
Thanks so much 😊
@josecanas2737
7 ай бұрын
Great video. Thanks for the links to the outlet and ground adapter. Just installed my new patio light very easy 20 minutes project.
@handydadtv
7 ай бұрын
Glad it was helpful 👍🏻
@FALCO797
2 ай бұрын
Amazing. Best video on KZitem about this subject. Thanks!
@handydadtv
2 ай бұрын
Thanks so much 😊
@ChanDiles
13 күн бұрын
Thanks Dad!
@handydadtv
13 күн бұрын
My pleasure!
@fasd913
14 күн бұрын
Great video. Noticed a number of questions about the need to use a GFCI outlet to attach the outdoor fixture, is there any reason you wouldn't use one? Also, does it pass code to simply drill a hole straight through an existing outlet box through an exterior wall if you are placing the fixture directly on the opposite side?
@handydadtv
13 күн бұрын
There is no harm in using a GFCI outlet but permanent fixtures do not require them. Only outlets require shock protection. I’m no code expert but it’s a common practice to drill through the box instead of opening the wall.
@fasd913
13 күн бұрын
@@handydadtv Thanks! And thanks for putting together such great video content!
@hermanjenkins9163
5 ай бұрын
This is great I have been wondering how I could do this. Thank, for the Demonstration.
@handydadtv
5 ай бұрын
Glad it was helpful 👍🏻
@Nemesis74racer
5 ай бұрын
Thank you so much for this vid. I can now install the sensor lights I bought from Costco!
@handydadtv
5 ай бұрын
Glad it was helpful 👍🏻
@manoharanchinnaiyan1243
Жыл бұрын
Hello Sir, Sharing your experience and is very much helpful for beginners like me and Great Thanks.!
@handydadtv
Жыл бұрын
My pleasure
@calmyokoolaid1133
Жыл бұрын
Can you do a how to add an additional light to an existing light? I am trying to have my light switch turn on an additional new light that is placed further away. Thanks for all the help!
@handydadtv
Жыл бұрын
I’ll put it on my list, but in the meantime, just connect your new wires to the same ones going to the existing light.
@Spigola1-351
Ай бұрын
Hi Rich, do you have a video installing an outdoor motion sensor light to a gfci outlet with no switch? Or did I overlook the video.
@handydadtv
Ай бұрын
Not Rich 🤑 This kzitem.info/news/bejne/qZ2imqp9p5SrqKQ is the closest I have, but it’s not from a GFCI. BTW, permanent fixtures don’t need GFCI protection. Only outlets.
@Spigola1-351
Ай бұрын
My apologies, Chris! Thanks so much.
@vishalmaharaj6433
7 ай бұрын
Very nicely explained
@handydadtv
7 ай бұрын
Thanks 😊
@felipegarcia318
13 күн бұрын
Hello , as you mentioned all flood lights come with 3 wires , ground , black , and white ,, like you mentioned white goes with white and black goes with black , I didn’t see if ground (3rd wire on floor light ) also goes ground to ground , or do you just leave it alone ?? All I saw was the ground wire coming from switch grounded directly to plate , did I missed anything ?
@handydadtv
13 күн бұрын
The ground is always connected as well.
@TackleFarm
10 ай бұрын
Thanks for the excellent explanation. I want to do something similar. In my garage I have a backside of an outlet box that services an outlet on the outside of the garage. Can I come off that outlet to a switch that control a light that I want to install on outside my garage? If so, do you have video showing the process? The stud wall in my garage is open so I can easily route new wiring. Thanks much!
@handydadtv
10 ай бұрын
I only have the wiring videos.
@handydadtv
10 ай бұрын
But yes, you can take a line from the outlet to a switch to an outside light.
@jamesshelleywijnhamer19
5 ай бұрын
I am installing a ring motion light to the fron of my garage. There is no light currently. Would I need to put the n a junction box? Thank you
@handydadtv
5 ай бұрын
If you bought a Ring Floodlight Cam, yes it needs to be hard wired and that requires a round outdoor box. You can use a surface mounted box or one installed flush to the wall.
@godfathermas
Жыл бұрын
Great video! Question for you, should it be a GFC outlet in case water gets inside the floodlight, etc? Thank you
@handydadtv
Жыл бұрын
GFCI is only for outlets. No need for anything hardwired.
@jasonwu6564
8 ай бұрын
Thank you Chris.
@handydadtv
8 ай бұрын
My pleasure!
@nonyabusiness2510
6 ай бұрын
great explanation. Thank you.
@handydadtv
6 ай бұрын
My pleasure!
@lorenlibby7066
Жыл бұрын
Just the video I needed!!! Thank you!
@handydadtv
Жыл бұрын
Glad it was helpful 👍🏻
@reviewchannel6850
5 ай бұрын
I have Motion Activated Security Light in my balcony and that one got a swtch to turn it off or on and the light installed on junction box . if i get power from the same junction box that the 1st light is installed on another junction box for the new Motion Activated Security Light which is gona be 6 meter away Do i still need another switch to control the second one or only the one that is already there is good for both
@handydadtv
5 ай бұрын
You don’t need another switch.
@ericarg96
4 ай бұрын
i have a outdoor light and would like to run a outdoor outlet for a tv, is it the same process. pardon my ignorance
@handydadtv
4 ай бұрын
It’s a bit different. Watch this: kzitem.info/news/bejne/o5yIwIePh2OCloo
@technousr
8 ай бұрын
Do you have any how to creating landscaping lighting? Low voltage vs 110 voltage? How to wire outdoor whether you need to add insulation tubing as per code or wires can lay directing underground?
@handydadtv
8 ай бұрын
Low voltage: Just plug the transformer into a GFCI outlet, then anything goes with the wiring. Run it however you want. Line voltage: From what I’ve read, a GFCI-protected line only needs to be buried 12 inches and doesn’t need to be in conduit if using UF Romex (underground feed). Of course, this can vary by jurisdiction so always check local codes.
@ranbirsingh994
5 ай бұрын
Sir, what do you call the blue round box that connects the wall and mount the motion light? Please let me know, thanks
@handydadtv
4 ай бұрын
4-inch ceiling box.
@ranbirsingh994
4 ай бұрын
@@handydadtv Thanks indeed for your reply!
@tannerc900
5 ай бұрын
Out of curiosity, do you use 14 gauge or 12 gauge wire? For my electrical projects which aren’t very advanced but amongst the scope of things you show such as adding a new outlet off another or adding a light off an outlet etc, I follow your directions pretty precisely but I want to make sure I’m using the best wire. I picked up a roll of 14 gauge wire but looking to hear your thoughts.
@handydadtv
5 ай бұрын
What is the size of the circuit breaker? Amperage dictates wire size.
@tannerc900
5 ай бұрын
@@handydadtv 100 amps
@handydadtv
5 ай бұрын
That’s the main breaker. You need to find the one that powers that circuit.
@tannerc900
5 ай бұрын
@@handydadtv sorry,i misunderstood. The breaker on that circuit says 15
@handydadtv
5 ай бұрын
@tannerc900 You can use 14 gauge wire for a 15-amp circuit.
@danev6972
Жыл бұрын
Trying to add a light fromThe outlet but the outlet has both neutral & hot terminals already are used. I believe one is going to the ceiling fan. Is it possible to add another light to the same outlet by pigtailing all three wires(hot,fan,light) & connecting to just one terminal?..doing same to neutrals. thank you.
@handydadtv
Жыл бұрын
Yes you need pigtails
@user-io9vw5fv1f
8 ай бұрын
MY situation is similar. I have an existing outside light and I need to add another light fixture around the corner. I was thinking of using a PVC surface mount box and use PVC conduit to route the wire and mount the lights on the box. Both locations are either under the porch roof or under a soffit. The siding is cedar. Any suggestions?
@handydadtv
8 ай бұрын
That’s an easier option than opening walls.
@cas01
6 ай бұрын
Great video. Thumbs up for you sir. 👍
@handydadtv
6 ай бұрын
Thanks so much 😊
@seekerman1964
Жыл бұрын
Hi,I have a question for you. I have a Dusk to Dawn feaxture out side my house that is on all day and all night. I do not know where the electricity source is at , And I would like to adjust that light feaxture to only light at nights. Where do you think it’s power comes from?
@handydadtv
Жыл бұрын
You need to turn off each circuit breaker, one at a time, until you find it. Start with 15 amp, then 20 amp.
@timparrish9834
5 ай бұрын
Hi I changed out lights in my bathroom and moved them from wall to ceiling. The new light has vent and light to it. That's been hooked up. The old switch that went to light on Wallis not longer needed so I want to changed that switch out to a double outlet. Can you tell me how to do that?
@handydadtv
5 ай бұрын
You want a double outlet where there was a switch. Do you mean a duplex receptacle or TWO duplex receptacles? If you already have one, it’s easy to add another. If you only have a switch, you need to verify you have a neutral to change it to an outlet like in this video: kzitem.info/news/bejne/koCBlmGvqICSiqQ Either way, be sure to use a GFCI outlet for shock protection. This video shows how to wire that: kzitem.info/news/bejne/yqSm3IKqb2dqZHo
@timparrish9834
5 ай бұрын
Thank you so much for answering and your videos. It has 2 switches one for light and another for vent fan. I put a new LED light and vent fan where old fan came down. Put new switch in the place of vent fan switch. I haven't tried this yet. I want to take out the old light switch and replace with an outlet next to the new vent fan light switch. Can that be done? I will watch the videos you pasted on, your awesome@@handydadtv
@handydadtv
5 ай бұрын
You can only add an outlet there if you have a neutral in the switch box. Be aware, that outlet will be on a lighting circuit so anything you plug into the outlet will cause the lights to flicker.
@gatorlanphear4599
8 ай бұрын
Does the bottom outlet turn off when the light is off or does it have constant power?
@handydadtv
8 ай бұрын
I wired it to have constant power.
@gatorlanphear4599
8 ай бұрын
Thanks for your reply... In this video, is that the wiring for constant power?@@handydadtv
@alissonalvarez3250
Жыл бұрын
What if you have a double outlet? Like the one you had there on the bottom right? I’m trying to install a ring flood light but the only outlet availables are the double outlets
@handydadtv
Жыл бұрын
You can do the same thing and still have 3 outlets available.
@alvinsaulsberry398
3 ай бұрын
Very handy 😊
@handydadtv
3 ай бұрын
Thanks 😊
@manoharanchinnaiyan1243
Жыл бұрын
Hello Sir, Need a advice on my simple project. Planning to connect 3, 46 watt outdoor light from patio outlet by adding a switch box. Does it need any circuit breaker or just adding like in our video will be good? Also Can I use 14 gauge stranded wire from the outlet(easy for wiring)? Please advice.! Thanks In Advance.!
@handydadtv
Жыл бұрын
You don’t need to run a new circuit. Don’t use stranded wire for permanent wiring. Use Romex if you’re running the wire through the wall. Use Romex in conduit if running outside the wall.
@manoharanchinnaiyan1243
Жыл бұрын
@@handydadtv Hi Sir, Sincere Thanks & Appreciate your quick response.! This gives me more clarity and I can confidently wiring it up. GBU.!
@magicmanny72
9 ай бұрын
Can I add multiple lights like that from the same on/off switch?
@handydadtv
9 ай бұрын
Yes
@Electronzap
10 ай бұрын
Good info.
@handydadtv
10 ай бұрын
Thanks 😊
@MOPAC85
9 ай бұрын
Thank you
@handydadtv
9 ай бұрын
My pleasure!
@ZerOArtGFX
9 ай бұрын
Hi Dad! Do I need to run a special electrical cable or will regular romex work? thanks!
@handydadtv
9 ай бұрын
Romex is fine as long as it’s allowed in your town. Some require shielded cables.
@ZerOArtGFX
9 ай бұрын
@@handydadtv thanks!
@mohammadhamed5586
Жыл бұрын
I live in the Middle East and I have a table fan that works with electricity 230 V AC 50 HZ.. If I brought it to the USA and ran it on two phases, each of them 120 V AC 60 HZ.. Does it work well or does it burn...? Thank you
@handydadtv
Жыл бұрын
No, it won’t work here.
@SuneOne23
10 ай бұрын
What gauge wire do I need if I’m pulling from a junction box from my garage that’s connected to a 30amp breaker?
@handydadtv
10 ай бұрын
30-amp circuits aren’t standard for outlets. I’d only recommend 15 or 20. To answer your question, googlethatforyou.com?q=what%20gauge%20wire%20for%2030%20amp
@RetroTank365
4 ай бұрын
Are the bulbs interchangeable?
@handydadtv
4 ай бұрын
Not the sample used in this video. But you can get one that uses bulbs.
@iampanafrican
2 ай бұрын
What’s highest watt light you can connect using this method?
@handydadtv
2 ай бұрын
That depends on the capacity of the circuit breaker and the other devices you have on that circuit.
@gregoryc5989
Жыл бұрын
Great video, thanks
@handydadtv
Жыл бұрын
Glad it was helpful 👍🏻
@198525lakers
4 ай бұрын
Is it the same for a GCFI outlet?
@handydadtv
4 ай бұрын
Not really. Watch this: kzitem.info/news/bejne/o5yIwIePh2OCloo
@vonr3375
8 ай бұрын
what gauge of wire do you recommend if your only feeding one light fixture.
@handydadtv
8 ай бұрын
The wire gauge is *always* determined by the circuit breaker rating. A breaker that’s 15 amps can use 14 gauge wire. 20 amps needs 12 gauge wire.
@Adsaved
Жыл бұрын
How do I add a plug to the wires from the lamp and then just plug it in to extension that connects to outlet inside? 😅 Do I need a surge protector?
@handydadtv
Жыл бұрын
If you want to convert a light fixture from hardwired to plug, the easiest solution is to cut the female end of an outdoor (grounded) extension cord, strip the insulation, and connect it with Wagos or wire nuts.
@cherylguthrie3959
Жыл бұрын
Awesome! Thanks
@handydadtv
Жыл бұрын
My pleasure
@jeffbowlds1103
4 ай бұрын
I want add outside outlet to wires from yard lights that's going into a box
@handydadtv
4 ай бұрын
kzitem.info/news/bejne/o5yIwIePh2OCloo
@user-xq6yz5zj3n
2 ай бұрын
❤
@handydadtv
2 ай бұрын
💙
@dardaniaal7299
Жыл бұрын
Hello sir I have question what kind of wires do I need for the light, and the outlet i have doesn’t have ground wire, only have white and black wire, can i still do it ?
@handydadtv
Жыл бұрын
You need to look at your circuit breaker. If it’s 15 amp, use 14 gauge wire. If it’s 20 amp, use 12 gauge wire. If your wires are encased in a metal shield, that provides the ground.
@dardaniaal7299
Жыл бұрын
@@handydadtv i checked it and looks like it’s regular cord wire
@dardaniaal7299
Жыл бұрын
@@handydadtv can i still do it without ground wire
@handydadtv
Жыл бұрын
It’s your choice. The light will work without a ground but it’s a risk.
@rterrancewhit4713
9 ай бұрын
I want a motion light onto my brick home from the outside. How difficult is that of a job?
@handydadtv
9 ай бұрын
Don’t DIY if you’ve never drilled through a brick wall before. Hire a handyman.
@treyleon8112
9 ай бұрын
I could be wrong, but I think best thing is to do it in the same wall cavity(between the studs) of an outlet, so above an outlet or switch. You’d have to cut and repair drywall after drilling through it. You’re going to need a few long masonry drill bits so you can start with a small one and work up to one that’s big enough to fit your wire through. I think you’d need a bigger plastic box for the outlet you’re tying into, some wire, wire nuts, a hammer drill would be best, but it’s possible to do it with a regular drill just use the smallest bit first and a cup of ice water to dip your bit in every 15sec or so since it will get really hot. Also would need stuff for drywall repair, wire strippers. Probably take you 2 days depending on how much time you have.
@shkurteajeti7836
Жыл бұрын
Hi i did something just like you did it , but doesn’t turn off , the light stays on thank you
@handydadtv
Жыл бұрын
It could be a defective light.
@georgegerman9009
Жыл бұрын
Yo nesecito esta caja para afuera de mi garage muy nuen video👍
@handydadtv
Жыл бұрын
👍🏻
@user-cm4is5ov3t
Жыл бұрын
How do you connect 2 electrical wires together
@handydadtv
Жыл бұрын
I prefer Wago Lever-Nuts but you can also use wire nuts.
@ricardocalderon8946
3 ай бұрын
I want to add an outside light fixture out in the back of my house
@handydadtv
3 ай бұрын
This is the way.
@robertdallas8867
11 ай бұрын
How many receptacles can I use on a 20 amp breaker. ?
@robertdallas8867
11 ай бұрын
On 12/2 wire.
@handydadtv
11 ай бұрын
Technically there is no limit to the number of receptacles on a circuit. You’re only limited by the total current of everything plugged in and turned on.
@robertdallas8867
11 ай бұрын
Ok great and thanks 👍🏻👍🏻 enjoy the video’s and subscribed 👍🏻👍🏻
@handydadtv
11 ай бұрын
@robertdallas8867 Thanks for subscribing! Welcome to the family!
@vvictortorress
Жыл бұрын
How do I install the box itself?
@handydadtv
Жыл бұрын
kzitem.info/news/bejne/sKaVvZeVjHl4jag
@robertolopezduque8637
Жыл бұрын
What size wire to use?
@handydadtv
Жыл бұрын
Depends on the rating of the circuit breaker. 15-amp circuit = 14 gauge wire 20-amp circuit = 12 gauge wire
@benpainter5384
10 ай бұрын
👍🏻
@handydadtv
10 ай бұрын
👌🏻
@ajmontand12
Жыл бұрын
Don't you have to have a GFCI-protected outlet for any light outside or did you forget about it!!
@handydadtv
Жыл бұрын
No, just outlets need GFCI protection.
@JessePierre-ss6ht
5 ай бұрын
how to wire 5 outlets with a light switch to operate the fifth outlet
@handydadtv
5 ай бұрын
Sounds like you meant to ask Google
@AlexRodriguez-do9jx
Жыл бұрын
If you're really worried about your light DtoD light "glitching" you can just reset the fuse.
@handydadtv
Жыл бұрын
Correct
@cliff.frankenberger
Жыл бұрын
@@handydadtv Great video - if you use a GFI outlet would the reset button serve the same purpose as the switch?
@handydadtv
Жыл бұрын
Yes, I suppose it would.
@grahamd5418
Жыл бұрын
I never trust USA electrics .
@handydadtv
Жыл бұрын
Where do you live?
@charlescharles4269
Ай бұрын
And if you want to reverse that, an outside light already existing to a new outside outlet?
Пікірлер: 157